⭐ 欢迎来到虫虫下载站! | 📦 资源下载 📁 资源专辑 ℹ️ 关于我们
⭐ 虫虫下载站

📄 in6.h

📁 eCos操作系统源码
💻 H
📖 第 1 页 / 共 3 页
字号:
#define IPV6_ADDR_SCOPE_NODELOCAL	0x01#define IPV6_ADDR_SCOPE_INTFACELOCAL	0x01#define IPV6_ADDR_SCOPE_LINKLOCAL	0x02#define IPV6_ADDR_SCOPE_SITELOCAL	0x05#define IPV6_ADDR_SCOPE_ORGLOCAL	0x08	/* just used in this file */#define IPV6_ADDR_SCOPE_GLOBAL		0x0e#else#define __IPV6_ADDR_SCOPE_NODELOCAL	0x01#define __IPV6_ADDR_SCOPE_INTFACELOCAL	0x01#define __IPV6_ADDR_SCOPE_LINKLOCAL	0x02#define __IPV6_ADDR_SCOPE_SITELOCAL	0x05#define __IPV6_ADDR_SCOPE_ORGLOCAL	0x08	/* just used in this file */#define __IPV6_ADDR_SCOPE_GLOBAL	0x0e#endif/* * Unicast Scope * Note that we must check topmost 10 bits only, not 16 bits (see RFC2373). */#define IN6_IS_ADDR_LINKLOCAL(a)	\	(((a)->s6_addr[0] == 0xfe) && (((a)->s6_addr[1] & 0xc0) == 0x80))#define IN6_IS_ADDR_SITELOCAL(a)	\	(((a)->s6_addr[0] == 0xfe) && (((a)->s6_addr[1] & 0xc0) == 0xc0))/* * Multicast */#define IN6_IS_ADDR_MULTICAST(a)	((a)->s6_addr[0] == 0xff)#ifdef _KERNEL	/* XXX nonstandard */#define IPV6_ADDR_MC_SCOPE(a)		((a)->s6_addr[1] & 0x0f)#else#define __IPV6_ADDR_MC_SCOPE(a)		((a)->s6_addr[1] & 0x0f)#endif/* * Multicast Scope */#ifdef _KERNEL	/* refers nonstandard items */#define IN6_IS_ADDR_MC_NODELOCAL(a)	\	(IN6_IS_ADDR_MULTICAST(a) &&	\	 (IPV6_ADDR_MC_SCOPE(a) == IPV6_ADDR_SCOPE_NODELOCAL))#define IN6_IS_ADDR_MC_INTFACELOCAL(a)	\	(IN6_IS_ADDR_MULTICAST(a) &&	\	 (IPV6_ADDR_MC_SCOPE(a) == IPV6_ADDR_SCOPE_INTFACELOCAL))#define IN6_IS_ADDR_MC_LINKLOCAL(a)	\	(IN6_IS_ADDR_MULTICAST(a) &&	\	 (IPV6_ADDR_MC_SCOPE(a) == IPV6_ADDR_SCOPE_LINKLOCAL))#define IN6_IS_ADDR_MC_SITELOCAL(a)	\	(IN6_IS_ADDR_MULTICAST(a) && 	\	 (IPV6_ADDR_MC_SCOPE(a) == IPV6_ADDR_SCOPE_SITELOCAL))#define IN6_IS_ADDR_MC_ORGLOCAL(a)	\	(IN6_IS_ADDR_MULTICAST(a) &&	\	 (IPV6_ADDR_MC_SCOPE(a) == IPV6_ADDR_SCOPE_ORGLOCAL))#define IN6_IS_ADDR_MC_GLOBAL(a)	\	(IN6_IS_ADDR_MULTICAST(a) &&	\	 (IPV6_ADDR_MC_SCOPE(a) == IPV6_ADDR_SCOPE_GLOBAL))#else#define IN6_IS_ADDR_MC_NODELOCAL(a)	\	(IN6_IS_ADDR_MULTICAST(a) &&	\	 (__IPV6_ADDR_MC_SCOPE(a) == __IPV6_ADDR_SCOPE_NODELOCAL))#define IN6_IS_ADDR_MC_LINKLOCAL(a)	\	(IN6_IS_ADDR_MULTICAST(a) &&	\	 (__IPV6_ADDR_MC_SCOPE(a) == __IPV6_ADDR_SCOPE_LINKLOCAL))#define IN6_IS_ADDR_MC_SITELOCAL(a)	\	(IN6_IS_ADDR_MULTICAST(a) && 	\	 (__IPV6_ADDR_MC_SCOPE(a) == __IPV6_ADDR_SCOPE_SITELOCAL))#define IN6_IS_ADDR_MC_ORGLOCAL(a)	\	(IN6_IS_ADDR_MULTICAST(a) &&	\	 (__IPV6_ADDR_MC_SCOPE(a) == __IPV6_ADDR_SCOPE_ORGLOCAL))#define IN6_IS_ADDR_MC_GLOBAL(a)	\	(IN6_IS_ADDR_MULTICAST(a) &&	\	 (__IPV6_ADDR_MC_SCOPE(a) == __IPV6_ADDR_SCOPE_GLOBAL))#endif#ifdef _KERNEL	/* nonstandard *//* * KAME Scope */#define IN6_IS_SCOPE_LINKLOCAL(a)	\	((IN6_IS_ADDR_LINKLOCAL(a)) ||	\	 (IN6_IS_ADDR_MC_LINKLOCAL(a)))#if (defined(__FreeBSD__) && __FreeBSD__ >= 3)#define IFA6_IS_DEPRECATED(a) \	((a)->ia6_lifetime.ia6t_pltime != ND6_INFINITE_LIFETIME && \	 (u_int32_t)((time_second - (a)->ia6_updatetime)) > \	 (a)->ia6_lifetime.ia6t_pltime)#define IFA6_IS_INVALID(a) \	((a)->ia6_lifetime.ia6t_vltime != ND6_INFINITE_LIFETIME && \	 (u_int32_t)((time_second - (a)->ia6_updatetime)) > \	 (a)->ia6_lifetime.ia6t_vltime)#else#define IFA6_IS_DEPRECATED(a) \	((a)->ia6_lifetime.ia6t_pltime != ND6_INFINITE_LIFETIME && \	 (u_int32_t)((time.tv_sec - (a)->ia6_updatetime)) > \	 (a)->ia6_lifetime.ia6t_pltime)#define IFA6_IS_INVALID(a) \	((a)->ia6_lifetime.ia6t_vltime != ND6_INFINITE_LIFETIME && \	 (u_int32_t)((time.tv_sec - (a)->ia6_updatetime)) > \	 (a)->ia6_lifetime.ia6t_vltime)#endif#endif /* _KERNEL *//* * IP6 route structure */#if !defined(__NetBSD__) && !defined(__OpenBSD__) && !defined(__FreeBSD__)#ifndef _XOPEN_SOURCE#ifndef NEW_STRUCT_ROUTEstruct route_in6 {	struct	rtentry *ro_rt;	struct	sockaddr_in6 ro_dst;};#endif /* !NEW_STRUCT_ROUTE */#endif#endif/* * Options for use with [gs]etsockopt at the IPV6 level. * First word of comment is data type; bool is stored in int. *//* no hdrincl */#if 0 /* the followings are relic in IPv4 and hence are disabled */#define IPV6_OPTIONS		1  /* buf/ip6_opts; set/get IP6 options */#define IPV6_RECVOPTS		5  /* bool; receive all IP6 opts w/dgram */#define IPV6_RECVRETOPTS	6  /* bool; receive IP6 opts for response */#define IPV6_RECVDSTADDR	7  /* bool; receive IP6 dst addr w/dgram */#define IPV6_RETOPTS		8  /* ip6_opts; set/get IP6 options */#endif#define IPV6_SOCKOPT_RESERVED1	3  /* reserved for future use */#define IPV6_UNICAST_HOPS	4  /* int; IP6 hops */#define IPV6_MULTICAST_IF	9  /* u_int; set/get IP6 multicast i/f */#define IPV6_MULTICAST_HOPS	10 /* int; set/get IP6 multicast hops */#define IPV6_MULTICAST_LOOP	11 /* u_int; set/get IP6 multicast loopback */#define IPV6_JOIN_GROUP		12 /* ip6_mreq; join a group membership */#define IPV6_LEAVE_GROUP	13 /* ip6_mreq; leave a group membership */#define IPV6_PORTRANGE		14 /* int; range to choose for unspec port */#define ICMP6_FILTER		18 /* icmp6_filter; icmp6 filter *//* RFC2292 options */#ifdef _KERNEL#define IPV6_2292PKTINFO	19 /* bool; send/recv if, src/dst addr */#define IPV6_2292HOPLIMIT	20 /* bool; hop limit */#define IPV6_2292NEXTHOP	21 /* bool; next hop addr */#define IPV6_2292HOPOPTS	22 /* bool; hop-by-hop option */#define IPV6_2292DSTOPTS	23 /* bool; destinaion option */#define IPV6_2292RTHDR		24 /* bool; routing header */#define IPV6_2292PKTOPTIONS	25 /* buf/cmsghdr; set/get IPv6 options */#endif#define IPV6_CHECKSUM		26 /* int; checksum offset for raw socket */#define IPV6_V6ONLY		27 /* bool; make AF_INET6 sockets v6 only */#ifndef _KERNEL#define IPV6_BINDV6ONLY		IPV6_V6ONLY#endif#if 1 /* IPSEC */#define IPV6_IPSEC_POLICY	28 /* struct; get/set security policy */#endif#define IPV6_FAITH		29 /* bool; accept FAITH'ed connections */#if 1 /* IPV6FIREWALL */#define IPV6_FW_ADD		30 /* add a firewall rule to chain */#define IPV6_FW_DEL		31 /* delete a firewall rule from chain */#define IPV6_FW_FLUSH		32 /* flush firewall rule chain */#define IPV6_FW_ZERO		33 /* clear single/all firewall counter(s) */#define IPV6_FW_GET		34 /* get entire firewall rule chain */#endif/* new socket options introduced in RFC2292bis */#define IPV6_RTHDRDSTOPTS	35 /* ip6_dest; send dst option before rthdr */#define IPV6_RECVPKTINFO	36 /* bool; recv if, dst addr */#define IPV6_RECVHOPLIMIT	37 /* bool; recv hop limit */#define IPV6_RECVRTHDR		38 /* bool; recv routing header */#define IPV6_RECVHOPOPTS	39 /* bool; recv hop-by-hop option */#define IPV6_RECVDSTOPTS	40 /* bool; recv dst option after rthdr */#ifdef _KERNEL#define IPV6_RECVRTHDRDSTOPTS	41 /* bool; recv dst option before rthdr */#endif#define IPV6_USE_MIN_MTU	42 /* bool; send packets at the minimum MTU */#define IPV6_RECVPATHMTU	43 /* bool; notify an according MTU */#define IPV6_PATHMTU		44 /* mtuinfo; get the current path MTU (sopt),				      4 bytes int; MTU notification (cmsg) */#define IPV6_REACHCONF		45 /* no data; ND reachability confirm				      (cmsg only) *//* more new socket options introduced in RFC2292bis */#define IPV6_PKTINFO		46 /* in6_pktinfo; send if, src addr */#define IPV6_HOPLIMIT		47 /* int; send hop limit */#define IPV6_NEXTHOP		48 /* sockaddr; next hop addr */#define IPV6_HOPOPTS		49 /* ip6_hbh; send hop-by-hop option */#define IPV6_DSTOPTS		50 /* ip6_dest; send dst option befor rthdr */#define IPV6_RTHDR		51 /* ip6_rthdr; send routing header */#if 0#define IPV6_PKTOPTIONS		52 /* buf/cmsghdr; set/get IPv6 options */				   /* obsoleted by 2292bis */#endif#ifdef __OpenBSD__#define IPV6_AUTH_LEVEL		53   /* int; authentication used */#define IPV6_ESP_TRANS_LEVEL	54   /* int; transport encryption */#define IPV6_ESP_NETWORK_LEVEL	55   /* int; full-packet encryption */#define IPSEC6_OUTSA		56   /* set the outbound SA for a socket */#endif#define IPV6_RECVTCLASS		57 /* bool; recv traffic class values */#ifdef _KERNEL#define IPV6_OTCLASS		58 /* u_int8_t; send traffic class value */#endif#define IPV6_AUTOFLOWLABEL	59 /* bool; attach flowlabel automagically */#ifdef __OpenBSD__#define IPV6_IPCOMP_LEVEL	60   /* int; compression */#endif#define IPV6_TCLASS		61 /* int; send traffic class value */#define IPV6_DONTFRAG		62 /* bool; disable IPv6 fragmentation *//* to define items, should talk with KAME guys first, for *BSD compatibility */#define IPV6_RTHDR_LOOSE     0 /* this hop need not be a neighbor. XXX old spec */#define IPV6_RTHDR_STRICT    1 /* this hop must be a neighbor. XXX old spec */#define IPV6_RTHDR_TYPE_0    0 /* IPv6 routing header type 0 *//* * Defaults and limits for options */#define IPV6_DEFAULT_MULTICAST_HOPS 1	/* normally limit m'casts to 1 hop */#define IPV6_DEFAULT_MULTICAST_LOOP 1	/* normally hear sends if a member *//* * Argument structure for IPV6_JOIN_GROUP and IPV6_LEAVE_GROUP. */struct ipv6_mreq {	struct in6_addr	ipv6mr_multiaddr;	unsigned int	ipv6mr_interface;};/* * IPV6_PKTINFO: Packet information(RFC2292 sec 5) */struct in6_pktinfo {	struct in6_addr	ipi6_addr;	/* src/dst IPv6 address */	unsigned int	ipi6_ifindex;	/* send/recv interface index */};/* * Control structure for IPV6_RECVPATHMTU socket option. * Note that this structure is not fully conformant to rfc2292bis-02. * However, since how to tell the destination of the path (or the path itself) * to the application is not determined, we use our original structure.   */struct ip6_mtuinfo {	struct sockaddr_in6 ip6m_addr;	/* or sockaddr_storage? */	u_int32_t ip6m_mtu;};/* * Argument for IPV6_PORTRANGE: * - which range to search when port is unspecified at bind() or connect() */#define	IPV6_PORTRANGE_DEFAULT	0	/* default range */#define	IPV6_PORTRANGE_HIGH	1	/* "high" - request firewall bypass */#define	IPV6_PORTRANGE_LOW	2	/* "low" - vouchsafe security */#ifndef _XOPEN_SOURCE/* * Definitions for inet6 sysctl operations. * * Third level is protocol number. * Fourth level is desired variable within that protocol. */#define IPV6PROTO_MAXID	(IPPROTO_PIM + 1)	/* don't list to IPV6PROTO_MAX */#define CTL_IPV6PROTO_NAMES { \	{ 0, 0 }, { 0, 0 }, { 0, 0 }, { 0, 0 }, { 0, 0 }, \	{ 0, 0 }, \	{ "tcp6", CTLTYPE_NODE }, \	{ 0, 0 }, \	{ 0, 0 }, \	{ 0, 0 }, \	{ 0, 0 }, { 0, 0 }, { 0, 0 }, { 0, 0 }, { 0, 0 }, \	{ 0, 0 }, \	{ 0, 0 }, \	{ "udp6", CTLTYPE_NODE }, \	{ 0, 0 }, \	{ 0, 0 }, \	{ 0, 0 }, { 0, 0 }, { 0, 0 }, { 0, 0 }, { 0, 0 }, \	{ 0, 0 }, { 0, 0 }, { 0, 0 }, { 0, 0 }, { 0, 0 }, \	{ 0, 0 }, { 0, 0 }, { 0, 0 }, { 0, 0 }, { 0, 0 }, \	{ 0, 0 }, { 0, 0 }, { 0, 0 }, { 0, 0 }, { 0, 0 }, \	{ 0, 0 }, \	{ "ip6", CTLTYPE_NODE }, \	{ 0, 0 }, \	{ 0, 0 }, \	{ 0, 0 }, \	{ 0, 0 }, { 0, 0 }, { 0, 0 }, { 0, 0 }, { 0, 0 }, \	{ 0, 0 }, \	{ "ipsec6", CTLTYPE_NODE }, \	{ 0, 0 }, \	{ 0, 0 }, \	{ 0, 0 }, \	{ 0, 0 }, \	{ 0, 0 }, \	{ 0, 0 }, \	{ "icmp6", CTLTYPE_NODE }, \	{ 0, 0 }, \	{ 0, 0 }, { 0, 0 }, { 0, 0 }, { 0, 0 }, { 0, 0 }, \	{ 0, 0 }, { 0, 0 }, { 0, 0 }, { 0, 0 }, { 0, 0 }, \

⌨️ 快捷键说明

复制代码 Ctrl + C
搜索代码 Ctrl + F
全屏模式 F11
切换主题 Ctrl + Shift + D
显示快捷键 ?
增大字号 Ctrl + =
减小字号 Ctrl + -