in6.h

eCos操作系统源码

//==========================================================================
//
//      include/netinet6/in6.h
//
//==========================================================================
//####BSDCOPYRIGHTBEGIN####
//
// -------------------------------------------
//
// Portions of this software may have been derived from OpenBSD, 
// FreeBSD or other sources, and are covered by the appropriate
// copyright disclaimers included herein.
//
// Portions created by Red Hat are
// Copyright (C) 2002 Red Hat, Inc. All Rights Reserved.
//
// -------------------------------------------
//
//####BSDCOPYRIGHTEND####
//==========================================================================

/*	$KAME: in6.h,v 1.115 2002/01/02 06:43:13 jinmei Exp $	*/

/*
 * Copyright (C) 1995, 1996, 1997, and 1998 WIDE Project.
 * All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 * 1. Redistributions of source code must retain the above copyright
 *    notice, this list of conditions and the following disclaimer.
 * 2. Redistributions in binary form must reproduce the above copyright
 *    notice, this list of conditions and the following disclaimer in the
 *    documentation and/or other materials provided with the distribution.
 * 3. Neither the name of the project nor the names of its contributors
 *    may be used to endorse or promote products derived from this software
 *    without specific prior written permission.
 *
 * THIS SOFTWARE IS PROVIDED BY THE PROJECT AND CONTRIBUTORS ``AS IS'' AND
 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
 * ARE DISCLAIMED.  IN NO EVENT SHALL THE PROJECT OR CONTRIBUTORS BE LIABLE
 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
 * SUCH DAMAGE.
 */

/*
 * Copyright (c) 1982, 1986, 1990, 1993
 *	The Regents of the University of California.  All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 * 1. Redistributions of source code must retain the above copyright
 *    notice, this list of conditions and the following disclaimer.
 * 2. Redistributions in binary form must reproduce the above copyright
 *    notice, this list of conditions and the following disclaimer in the
 *    documentation and/or other materials provided with the distribution.
 * 3. All advertising materials mentioning features or use of this software
 *    must display the following acknowledgement:
 *	This product includes software developed by the University of
 *	California, Berkeley and its contributors.
 * 4. Neither the name of the University nor the names of its contributors
 *    may be used to endorse or promote products derived from this software
 *    without specific prior written permission.
 *
 * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
 * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
 * SUCH DAMAGE.
 *
 *	@(#)in.h	8.3 (Berkeley) 1/3/94
 */

#ifndef __KAME_NETINET_IN_H_INCLUDED_
#error "do not include netinet6/in6.h directly, include netinet/in.h.  see RFC2553"
#endif

#ifndef _NETINET6_IN6_H_
#define _NETINET6_IN6_H_

/*
 * Identification of the network protocol stack
 * for *BSD-current/release: http://www.kame.net/dev/cvsweb.cgi/kame/COVERAGE
 * has the table of implementation/integration differences.
 */
#define __KAME__
#define __KAME_VERSION		"SNAP 20020107"

/*
 * Local port number conventions:
 *
 * Ports < IPPORT_RESERVED are reserved for privileged processes (e.g. root),
 * unless a kernel is compiled with IPNOPRIVPORTS defined.
 *
 * When a user does a bind(2) or connect(2) with a port number of zero,
 * a non-conflicting local port address is chosen.
 *
 * The default range is IPPORT_ANONMIN to IPPORT_ANONMAX, although
 * that is settable by sysctl(3); net.inet.ip.anonportmin and
 * net.inet.ip.anonportmax respectively.
 *
 * A user may set the IPPROTO_IP option IP_PORTRANGE to change this
 * default assignment range.
 *
 * The value IP_PORTRANGE_DEFAULT causes the default behavior.
 *
 * The value IP_PORTRANGE_HIGH is the same as IP_PORTRANGE_DEFAULT,
 * and exists only for FreeBSD compatibility purposes.
 *
 * The value IP_PORTRANGE_LOW changes the range to the "low" are
 * that is (by convention) restricted to privileged processes.
 * This convention is based on "vouchsafe" principles only.
 * It is only secure if you trust the remote host to restrict these ports.
 * The range is IPPORT_RESERVEDMIN to IPPORT_RESERVEDMAX.
 */

#define	IPV6PORT_RESERVED	1024
#define	IPV6PORT_ANONMIN	49152
#define	IPV6PORT_ANONMAX	65535
#define	IPV6PORT_RESERVEDMIN	600
#define	IPV6PORT_RESERVEDMAX	(IPV6PORT_RESERVED-1)

/*
 * IPv6 address
 */
struct in6_addr {
	union {
		u_int8_t   __u6_addr8[16];
		u_int16_t  __u6_addr16[8];
		u_int32_t  __u6_addr32[4];
	} __u6_addr;			/* 128-bit IP6 address */
};

#define s6_addr   __u6_addr.__u6_addr8
#ifdef _KERNEL	/* XXX nonstandard */
#define s6_addr8  __u6_addr.__u6_addr8
#define s6_addr16 __u6_addr.__u6_addr16
#define s6_addr32 __u6_addr.__u6_addr32
#endif

#define INET6_ADDRSTRLEN	46

/*
 * Socket address for IPv6
 */
#ifndef _XOPEN_SOURCE
#define SIN6_LEN
#endif
struct sockaddr_in6 {
	u_int8_t	sin6_len;	/* length of this struct(sa_family_t)*/
	u_int8_t	sin6_family;	/* AF_INET6 (sa_family_t) */
	u_int16_t	sin6_port;	/* Transport layer port # (in_port_t)*/
	u_int32_t	sin6_flowinfo;	/* IP6 flow information */
	struct in6_addr	sin6_addr;	/* IP6 address */
	u_int32_t	sin6_scope_id;	/* scope zone index */
};

/*
 * Local definition for masks
 */
#ifdef _KERNEL	/* XXX nonstandard */
#define IN6MASK0	{{{ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 }}}
#define IN6MASK32	{{{ 0xff, 0xff, 0xff, 0xff, 0x00, 0x00, 0x00, 0x00, \
			    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 }}}
#define IN6MASK64	{{{ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, \
			    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 }}}
#define IN6MASK96	{{{ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, \
			    0xff, 0xff, 0xff, 0xff, 0x00, 0x00, 0x00, 0x00 }}}
#define IN6MASK128	{{{ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, \
			    0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff }}}
#endif

#ifdef _KERNEL
extern const struct sockaddr_in6 sa6_any;

extern const struct in6_addr in6mask0;
extern const struct in6_addr in6mask32;
extern const struct in6_addr in6mask64;
extern const struct in6_addr in6mask96;
extern const struct in6_addr in6mask128;
#endif /* _KERNEL */

/*
 * Macros started with IPV6_ADDR is KAME local
 */
#ifdef _KERNEL	/* XXX nonstandard */
#if BYTE_ORDER == BIG_ENDIAN
#define IPV6_ADDR_INT32_ONE	1
#define IPV6_ADDR_INT32_TWO	2
#define IPV6_ADDR_INT32_MNL	0xff010000
#define IPV6_ADDR_INT32_MLL	0xff020000
#define IPV6_ADDR_INT32_SMP	0x0000ffff
#define IPV6_ADDR_INT16_ULL	0xfe80
#define IPV6_ADDR_INT16_USL	0xfec0
#define IPV6_ADDR_INT16_MLL	0xff02
#elif BYTE_ORDER == LITTLE_ENDIAN
#define IPV6_ADDR_INT32_ONE	0x01000000
#define IPV6_ADDR_INT32_TWO	0x02000000
#define IPV6_ADDR_INT32_MNL	0x000001ff
#define IPV6_ADDR_INT32_MLL	0x000002ff
#define IPV6_ADDR_INT32_SMP	0xffff0000
#define IPV6_ADDR_INT16_ULL	0x80fe
#define IPV6_ADDR_INT16_USL	0xc0fe
#define IPV6_ADDR_INT16_MLL	0x02ff
#endif
#endif

/*
 * Definition of some useful macros to handle IP6 addresses
 */
#define IN6ADDR_ANY_INIT \
	{{{ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
	    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 }}}
#define IN6ADDR_LOOPBACK_INIT \
	{{{ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
	    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01 }}}
#define IN6ADDR_NODELOCAL_ALLNODES_INIT \
	{{{ 0xff, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
	    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01 }}}
#define IN6ADDR_INTFACELOCAL_ALLNODES_INIT \
	{{{ 0xff, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
	    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01 }}}
#define IN6ADDR_LINKLOCAL_ALLNODES_INIT \
	{{{ 0xff, 0x02, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
	    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01 }}}
#define IN6ADDR_LINKLOCAL_ALLROUTERS_INIT \
	{{{ 0xff, 0x02, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
	    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x02 }}}

extern const struct in6_addr in6addr_any;
extern const struct in6_addr in6addr_loopback;
extern const struct in6_addr in6addr_nodelocal_allnodes;
extern const struct in6_addr in6addr_linklocal_allnodes;
extern const struct in6_addr in6addr_linklocal_allrouters;

/*
 * Equality
 * NOTE: Some of kernel programming environment (for example, openbsd/sparc)
 * does not supply memcmp().  For userland memcmp() is preferred as it is
 * in ANSI standard.
 */
#ifdef _KERNEL
#define IN6_ARE_ADDR_EQUAL(a, b)			\
    (bcmp(&(a)->s6_addr[0], &(b)->s6_addr[0], sizeof(struct in6_addr)) == 0)
#else
#define IN6_ARE_ADDR_EQUAL(a, b)			\
    (memcmp(&(a)->s6_addr[0], &(b)->s6_addr[0], sizeof(struct in6_addr)) == 0)
#endif

#ifdef _KERNEL			/* non standard */
/* see if two addresses are equal in a scope-conscious manner. */
#define SA6_ARE_ADDR_EQUAL(a, b) \
	(((a)->sin6_scope_id == 0 || (b)->sin6_scope_id == 0 || \
	  ((a)->sin6_scope_id == (b)->sin6_scope_id)) && \
	 (bcmp(&(a)->sin6_addr, &(b)->sin6_addr, sizeof(struct in6_addr)) == 0))
#endif

/*
 * Unspecified
 */
#define IN6_IS_ADDR_UNSPECIFIED(a)	\
	((*(const u_int32_t *)(const void *)(&(a)->s6_addr[0]) == 0) &&	\
	 (*(const u_int32_t *)(const void *)(&(a)->s6_addr[4]) == 0) &&	\
	 (*(const u_int32_t *)(const void *)(&(a)->s6_addr[8]) == 0) &&	\
	 (*(const u_int32_t *)(const void *)(&(a)->s6_addr[12]) == 0))

/*
 * Loopback
 */
#define IN6_IS_ADDR_LOOPBACK(a)		\
	((*(const u_int32_t *)(const void *)(&(a)->s6_addr[0]) == 0) &&	\
	 (*(const u_int32_t *)(const void *)(&(a)->s6_addr[4]) == 0) &&	\
	 (*(const u_int32_t *)(const void *)(&(a)->s6_addr[8]) == 0) &&	\
	 (*(const u_int32_t *)(const void *)(&(a)->s6_addr[12]) == ntohl(1)))

/*
 * IPv4 compatible
 */
#define IN6_IS_ADDR_V4COMPAT(a)		\
	((*(const u_int32_t *)(const void *)(&(a)->s6_addr[0]) == 0) &&	\
	 (*(const u_int32_t *)(const void *)(&(a)->s6_addr[4]) == 0) &&	\
	 (*(const u_int32_t *)(const void *)(&(a)->s6_addr[8]) == 0) &&	\
	 (*(const u_int32_t *)(const void *)(&(a)->s6_addr[12]) != 0) &&	\
	 (*(const u_int32_t *)(const void *)(&(a)->s6_addr[12]) != ntohl(1)))

/*
 * Mapped
 */
#define IN6_IS_ADDR_V4MAPPED(a)		      \
	((*(const u_int32_t *)(const void *)(&(a)->s6_addr[0]) == 0) &&	\
	 (*(const u_int32_t *)(const void *)(&(a)->s6_addr[4]) == 0) &&	\
	 (*(const u_int32_t *)(const void *)(&(a)->s6_addr[8]) == ntohl(0x0000ffff)))

/*
 * KAME Scope Values
 */

#ifdef _KERNEL	/* XXX nonstandard */