📄 mapped.mrp
字号:
(BUF) removed.Unused block
"v5_emac_ll/client_side_FIFO_emac0/rx_fifo_i/wr_fifo_status_3_not00011_INV_0"
(BUF) removed.Unused block
"v5_emac_ll/client_side_FIFO_emac0/rx_fifo_i/wr_fifo_status_3_or000015" (ROM)
removed.Unused block
"v5_emac_ll/client_side_FIFO_emac0/rx_fifo_i/wr_fifo_status_3_or000060" (ROM)
removed.Optimized Block(s):TYPE BLOCKGND XST_GNDVCC XST_VCCGND v5_emac_ll/XST_GNDVCC v5_emac_ll/XST_VCCGND v5_emac_ll/v5_emac_block/XST_GNDVCC v5_emac_ll/v5_emac_block/XST_VCCTo enable printing of redundant blocks removed and signals merged, set the
detailed map report option and rerun map.Section 6 - IOB Properties--------------------------+----------------------------------------------------------------------------------------------------------------------------------------+| IOB Name | Type | Direction | IO Standard | Drive | Slew | Reg (s) | Resistor | IOB || | | | | Strength | Rate | | | Delay |+----------------------------------------------------------------------------------------------------------------------------------------+| CLIENTEMAC0PAUSEREQ | IOB | INPUT | LVCMOS25 | | | | PULLDOWN | || CLIENTEMAC0PAUSEVAL<0> | IOB | INPUT | LVCMOS25 | | | | PULLDOWN | || CLIENTEMAC0PAUSEVAL<1> | IOB | INPUT | LVCMOS25 | | | | PULLDOWN | || CLIENTEMAC0PAUSEVAL<2> | IOB | INPUT | LVCMOS25 | | | | PULLDOWN | || CLIENTEMAC0PAUSEVAL<3> | IOB | INPUT | LVCMOS25 | | | | PULLDOWN | || CLIENTEMAC0PAUSEVAL<4> | IOB | INPUT | LVCMOS25 | | | | PULLDOWN | || CLIENTEMAC0PAUSEVAL<5> | IOB | INPUT | LVCMOS25 | | | | PULLDOWN | || CLIENTEMAC0PAUSEVAL<6> | IOB | INPUT | LVCMOS25 | | | | PULLDOWN | || CLIENTEMAC0PAUSEVAL<7> | IOB | INPUT | LVCMOS25 | | | | PULLDOWN | || CLIENTEMAC0PAUSEVAL<8> | IOB | INPUT | LVCMOS25 | | | | PULLDOWN | || CLIENTEMAC0PAUSEVAL<9> | IOB | INPUT | LVCMOS25 | | | | PULLDOWN | || CLIENTEMAC0PAUSEVAL<10> | IOB | INPUT | LVCMOS25 | | | | PULLDOWN | || CLIENTEMAC0PAUSEVAL<11> | IOB | INPUT | LVCMOS25 | | | | PULLDOWN | || CLIENTEMAC0PAUSEVAL<12> | IOB | INPUT | LVCMOS25 | | | | PULLDOWN | || CLIENTEMAC0PAUSEVAL<13> | IOB | INPUT | LVCMOS25 | | | | PULLDOWN | || CLIENTEMAC0PAUSEVAL<14> | IOB | INPUT | LVCMOS25 | | | | PULLDOWN | || CLIENTEMAC0PAUSEVAL<15> | IOB | INPUT | LVCMOS25 | | | | PULLDOWN | || CLIENTEMAC0TXIFGDELAY<0> | IOB | INPUT | LVCMOS25 | | | | PULLDOWN | || CLIENTEMAC0TXIFGDELAY<1> | IOB | INPUT | LVCMOS25 | | | | PULLDOWN | || CLIENTEMAC0TXIFGDELAY<2> | IOB | INPUT | LVCMOS25 | | | | PULLDOWN | || CLIENTEMAC0TXIFGDELAY<3> | IOB | INPUT | LVCMOS25 | | | | PULLDOWN | || CLIENTEMAC0TXIFGDELAY<4> | IOB | INPUT | LVCMOS25 | | | | PULLDOWN | || CLIENTEMAC0TXIFGDELAY<5> | IOB | INPUT | LVCMOS25 | | | | PULLDOWN | || CLIENTEMAC0TXIFGDELAY<6> | IOB | INPUT | LVCMOS25 | | | | PULLDOWN | || CLIENTEMAC0TXIFGDELAY<7> | IOB | INPUT | LVCMOS25 | | | | PULLDOWN | || EMAC0ANINTERRUPT | IOB | OUTPUT | LVCMOS25 | 12 | SLOW | | | || EMAC0CLIENTRXDVLD | IOB | OUTPUT | LVCMOS25 | 12 | SLOW | | | || EMAC0CLIENTRXFRAMEDROP | IOB | OUTPUT | LVCMOS25 | 12 | SLOW | | | || EMAC0CLIENTRXSTATS<0> | IOB | OUTPUT | LVCMOS25 | 12 | SLOW | | | || EMAC0CLIENTRXSTATS<1> | IOB | OUTPUT | LVCMOS25 | 12 | SLOW | | | || EMAC0CLIENTRXSTATS<2> | IOB | OUTPUT | LVCMOS25 | 12 | SLOW | | | || EMAC0CLIENTRXSTATS<3> | IOB | OUTPUT | LVCMOS25 | 12 | SLOW | | | || EMAC0CLIENTRXSTATS<4> | IOB | OUTPUT | LVCMOS25 | 12 | SLOW | | | || EMAC0CLIENTRXSTATS<5> | IOB | OUTPUT | LVCMOS25 | 12 | SLOW | | | || EMAC0CLIENTRXSTATS<6> | IOB | OUTPUT | LVCMOS25 | 12 | SLOW | | | || EMAC0CLIENTRXSTATSBYTEVLD | IOB | OUTPUT | LVCMOS25 | 12 | SLOW | | | || EMAC0CLIENTRXSTATSVLD | IOB | OUTPUT | LVCMOS25 | 12 | SLOW | | | || EMAC0CLIENTSYNCACQSTATUS | IOB | OUTPUT | LVCMOS25 | 12 | SLOW | | | || EMAC0CLIENTTXSTATS | IOB | OUTPUT | LVCMOS25 | 12 | SLOW | | | || EMAC0CLIENTTXSTATSBYTEVLD | IOB | OUTPUT | LVCMOS25 | 12 | SLOW | | | || EMAC0CLIENTTXSTATSVLD | IOB | OUTPUT | LVCMOS25 | 12 | SLOW | | | || PHYAD_0<0> | IOB | INPUT | LVCMOS25 | | | | PULLDOWN | || PHYAD_0<1> | IOB | INPUT | LVCMOS25 | | | | PULLUP | || PHYAD_0<2> | IOB | INPUT | LVCMOS25 | | | | PULLDOWN | || PHYAD_0<3> | IOB | INPUT | LVCMOS25 | | | | PULLDOWN | || PHYAD_0<4> | IOB | INPUT | LVCMOS25 | | | | PULLDOWN | || PHY_RESET_0 | IOB | OUTPUT | LVCMOS25 | 12 | SLOW | | | || RESET | IOB | INPUT | LVCMOS25 | | | | PULLUP | |+----------------------------------------------------------------------------------------------------------------------------------------+Section 7 - RPMs----------------Section 8 - Guide Report------------------------Guide not run on this design.Section 9 - Area Group and Partition Summary--------------------------------------------Partition Implementation Status------------------------------- No Partitions were found in this design.-------------------------------Area Group Information---------------------- No area groups were found in this design.Section 10 - Modular Design Summary-----------------------------------Modular Design not used for this design.Section 11 - Timing Report--------------------------INFO:Timing:3284 - This timing report was generated using estimated delay information. For accurate numbers, please refer to the post Place and Route timing report.Asterisk (*) preceding a constraint indicates it was not met. This may be due to a setup or hold violation.------------------------------------------------------------------------------------------------------ Constraint | Check | Worst Case | Best Case | Timing | Timing | | Slack | Achievable | Errors | Score ------------------------------------------------------------------------------------------------------* TS_v5_emac_v1_2_gtp_clk = PERIOD TIMEGRP | SETUP | 3.093ns| 4.607ns| 0| 0 "v5_emac_v1_2_gtp_clk" 7.7 ns HIGH 50% | HOLD | -1.024ns| | 17| 3393------------------------------------------------------------------------------------------------------* TS_v5_emac_v1_2_rec_clk0 = PERIOD TIMEGRP | SETUP | 3.912ns| 3.788ns| 0| 0 "v5_emac_v1_2_client_rec_clk0" 7.7 ns HI | HOLD | -0.945ns| | 2| 1890 GH 50% | | | | | ------------------------------------------------------------------------------------------------------* TS_v5_emac_v1_2_gtp_clk_client0 = PERIOD | SETUP | 2.382ns| 5.318ns| 0| 0 TIMEGRP "v5_emac_v1_2_gtp_clk_client0" 7. | HOLD | -0.039ns| | 3| 101 7 ns HIGH 50% | | | | | ------------------------------------------------------------------------------------------------------ ts_rx_buf_meta_protect_0 = MAXDELAY FROM | SETUP | 0.953ns| 4.047ns| 0| 0 TIMEGRP "rx_graycode_0" TO TIMEGRP "rx_bi | HOLD | 0.758ns| | 0| 0 nary_0" 5 ns | | | | | ------------------------------------------------------------------------------------------------------ ts_tx_meta_protect_0 = MAXDELAY FROM TIME | SETUP | 1.091ns| 3.909ns| 0| 0 GRP "tx_metastable_0" 5 ns DATAPATHONLY | HOLD | 0.537ns| | 0| 0------------------------------------------------------------------------------------------------------ ts_rx_meta_protect_0 = MAXDELAY FROM TIME | SETUP | 1.739ns| 3.261ns| 0| 0 GRP "rx_metastable_0" TO TIMEGRP "rx_stab | HOLD | 0.490ns| | 0| 0 le_0" 5 ns DATAPATHONLY | | | | | ------------------------------------------------------------------------------------------------------ NET "v5_emac_ll/v5_emac_block/GTP_DUAL_10 | MAXDELAY| 5.229ns| 0.771ns| 0| 0 00X_inst/rx_elastic_buffer_inst_0/wr_addr | | | | | _gray<3>" MAXDELAY = 6 ns | | | | | ------------------------------------------------------------------------------------------------------ NET "v5_emac_ll/v5_emac_block/GTP_DUAL_10 | MAXDELAY| 5.231ns| 0.769ns| 0| 0 00X_inst/rx_elastic_buffer_inst_0/wr_addr | | | | | _gray<4>" MAXDELAY = 6 ns | | | | | ------------------------------------------------------------------------------------------------------ NET "v5_emac_ll/v5_emac_block/GTP_DUAL_10 | MAXDELAY| 5.252ns| 0.748ns| 0| 0 00X_inst/rx_elastic_buffer_inst_0/wr_addr | | | | | _gray<0>" MAXDELAY = 6 ns | | | | | ------------------------------------------------------------------------------------------------------ NET "v5_emac_ll/v5_emac_block/GTP_DUAL_10 | MAXDELAY| 5.267ns| 0.733ns| 0| 0 00X_inst/rx_elastic_buffer_inst_0/wr_addr | | | | | _gray<1>" MAXDELAY = 6 ns | | | | | ------------------------------------------------------------------------------------------------------ NET "v5_emac_ll/v5_emac_block/GTP_DUAL_10 | MAXDELAY| 5.288ns| 0.712ns| 0| 0 00X_inst/rx_elastic_buffer_inst_0/wr_addr | | | | | _gray<6>" MAXDELAY = 6 ns | | | | | ------------------------------------------------------------------------------------------------------ NET "v5_emac_ll/v5_emac_block/GTP_DUAL_10 | MAXDELAY| 5.401ns| 0.599ns| 0| 0 00X_inst/rx_elastic_buffer_inst_0/wr_addr | | | | | _gray<2>" MAXDELAY = 6 ns | | | | | ------------------------------------------------------------------------------------------------------ NET "v5_emac_ll/v5_emac_block/GTP_DUAL_10 | MAXDELAY| 5.423ns| 0.577ns| 0| 0 00X_inst/rx_elastic_buffer_inst_0/wr_addr | | | | | _gray<5>" MAXDELAY = 6 ns | | | | | ------------------------------------------------------------------------------------------------------ TS_tx_fifo_wr_to_rd_0 = MAXDELAY FROM TIM | SETUP | 7.032ns| 0.968ns| 0| 0 EGRP "tx_fifo_wr_to_rd_0" TO TIMEGRP "v5_ | HOLD | 0.712ns| | 0| 0 emac_v1_2_gtp_clk_client0" 8 ns DATAPATHO | | | | | NLY | | | | | ------------------------------------------------------------------------------------------------------ TS_tx_fifo_addr_0 = MAXDELAY FROM TIMEGRP | SETUP | 7.120ns| 2.880ns| 0| 0 "tx_addr_rd_0" TO TIMEGRP "tx_addr_wr_0" | HOLD | 2.011ns| | 0| 0 10 ns | | | | | ------------------------------------------------------------------------------------------------------ TS_tx_fifo_rd_to_wr_0 = MAXDELAY FROM TIM | SETUP | 7.167ns| 0.833ns| 0| 0 EGRP "tx_fifo_rd_to_wr_0" TO TIMEGRP "v5_ | HOLD | 0.569ns| | 0| 0 emac_v1_2_gtp_clk_client0" 8 ns DATAPATHO | | | | | NLY | | | | | ------------------------------------------------------------------------------------------------------3 constraints not met.Section 12 - Configuration String Details-----------------------------------------Use the "-detail" map option to print out Configuration StringsSection 13 - Control Set Information------------------------------------Use the "-detail" map option to print out Control Set Information.⌨️ 快捷键说明
复制代码
Ctrl + C
搜索代码
Ctrl + F
全屏模式
F11
切换主题
Ctrl + Shift + D
显示快捷键
?
增大字号
Ctrl + =
减小字号
Ctrl + -