exception_handler.cc.svn-base
来自「SumatraPDF是一款小型开源的pdf阅读工具。虽然玲珑小巧(只有800多K」· SVN-BASE 代码 · 共 534 行 · 第 1/2 页
SVN-BASE
534 行
// staticLONG ExceptionHandler::HandleException(EXCEPTION_POINTERS *exinfo) { AutoExceptionHandler auto_exception_handler; ExceptionHandler *current_handler = auto_exception_handler.get_handler(); // Ignore EXCEPTION_BREAKPOINT and EXCEPTION_SINGLE_STEP exceptions. This // logic will short-circuit before calling WriteMinidumpOnHandlerThread, // allowing something else to handle the breakpoint without incurring the // overhead transitioning to and from the handler thread. DWORD code = exinfo->ExceptionRecord->ExceptionCode; LONG action; if (code != EXCEPTION_BREAKPOINT && code != EXCEPTION_SINGLE_STEP && current_handler->WriteMinidumpOnHandlerThread(exinfo, NULL)) { // The handler fully handled the exception. Returning // EXCEPTION_EXECUTE_HANDLER indicates this to the system, and usually // results in the applicaiton being terminated. // // Note: If the application was launched from within the Cygwin // environment, returning EXCEPTION_EXECUTE_HANDLER seems to cause the // application to be restarted. action = EXCEPTION_EXECUTE_HANDLER; } else { // There was an exception, it was a breakpoint or something else ignored // above, or it was passed to the handler, which decided not to handle it. // This could be because the filter callback didn't want it, because // minidump writing failed for some reason, or because the post-minidump // callback function indicated failure. Give the previous handler a // chance to do something with the exception. If there is no previous // handler, return EXCEPTION_CONTINUE_SEARCH, which will allow a debugger // or native "crashed" dialog to handle the exception. if (current_handler->previous_filter_) { action = current_handler->previous_filter_(exinfo); } else { action = EXCEPTION_CONTINUE_SEARCH; } } return action;}#if _MSC_VER >= 1400 // MSVC 2005/8// staticvoid ExceptionHandler::HandleInvalidParameter(const wchar_t *expression, const wchar_t *function, const wchar_t *file, unsigned int line, uintptr_t reserved) { // This is an invalid parameter, not an exception. It's safe to play with // sprintf here. AutoExceptionHandler auto_exception_handler; ExceptionHandler *current_handler = auto_exception_handler.get_handler(); MDRawAssertionInfo assertion; memset(&assertion, 0, sizeof(assertion)); _snwprintf_s(reinterpret_cast<wchar_t *>(assertion.expression), sizeof(assertion.expression) / sizeof(assertion.expression[0]), _TRUNCATE, L"%s", expression); _snwprintf_s(reinterpret_cast<wchar_t *>(assertion.function), sizeof(assertion.function) / sizeof(assertion.function[0]), _TRUNCATE, L"%s", function); _snwprintf_s(reinterpret_cast<wchar_t *>(assertion.file), sizeof(assertion.file) / sizeof(assertion.file[0]), _TRUNCATE, L"%s", file); assertion.line = line; assertion.type = MD_ASSERTION_INFO_TYPE_INVALID_PARAMETER; if (!current_handler->WriteMinidumpOnHandlerThread(NULL, &assertion)) { if (current_handler->previous_iph_) { // The handler didn't fully handle the exception. Give it to the // previous invalid parameter handler. current_handler->previous_iph_(expression, function, file, line, reserved); } else { // If there's no previous handler, pass the exception back in to the // invalid parameter handler's core. That's the routine that called this // function, but now, since this function is no longer registered (and in // fact, no function at all is registered), this will result in the // default code path being taken: _CRT_DEBUGGER_HOOK and _invoke_watson. // Use _invalid_parameter where it exists (in _DEBUG builds) as it passes // more information through. In non-debug builds, it is not available, // so fall back to using _invalid_parameter_noinfo. See invarg.c in the // CRT source.#ifdef _DEBUG _invalid_parameter(expression, function, file, line, reserved);#else // _DEBUG _invalid_parameter_noinfo();#endif // _DEBUG } } // The handler either took care of the invalid parameter problem itself, // or passed it on to another handler. "Swallow" it by exiting, paralleling // the behavior of "swallowing" exceptions. exit(0);}#endif // _MSC_VER >= 1400// staticvoid ExceptionHandler::HandlePureVirtualCall() { AutoExceptionHandler auto_exception_handler; ExceptionHandler *current_handler = auto_exception_handler.get_handler(); MDRawAssertionInfo assertion; memset(&assertion, 0, sizeof(assertion)); assertion.type = MD_ASSERTION_INFO_TYPE_PURE_VIRTUAL_CALL; if (!current_handler->WriteMinidumpOnHandlerThread(NULL, &assertion)) { if (current_handler->previous_pch_) { // The handler didn't fully handle the exception. Give it to the // previous purecall handler. current_handler->previous_pch_(); } else { // If there's no previous handler, return and let _purecall handle it. // This will just put up an assertion dialog. return; } } // The handler either took care of the invalid parameter problem itself, // or passed it on to another handler. "Swallow" it by exiting, paralleling // the behavior of "swallowing" exceptions. exit(0);}bool ExceptionHandler::WriteMinidumpOnHandlerThread( EXCEPTION_POINTERS *exinfo, MDRawAssertionInfo *assertion) { EnterCriticalSection(&handler_critical_section_); // Set up data to be passed in to the handler thread. requesting_thread_id_ = GetCurrentThreadId(); exception_info_ = exinfo; assertion_ = assertion; // This causes the handler thread to call WriteMinidumpWithException. ReleaseSemaphore(handler_start_semaphore_, 1, NULL); // Wait until WriteMinidumpWithException is done and collect its return value. WaitForSingleObject(handler_finish_semaphore_, INFINITE); bool status = handler_return_value_; // Clean up. requesting_thread_id_ = 0; exception_info_ = NULL; assertion_ = NULL; LeaveCriticalSection(&handler_critical_section_); return status;}bool ExceptionHandler::WriteMinidump() { return WriteMinidumpForException(NULL);}bool ExceptionHandler::WriteMinidumpForException(EXCEPTION_POINTERS *exinfo) { bool success = WriteMinidumpOnHandlerThread(exinfo, NULL); UpdateNextID(); return success;}// staticbool ExceptionHandler::WriteMinidump(const wstring &dump_path, MinidumpCallback callback, void *callback_context) { ExceptionHandler handler(dump_path, NULL, callback, callback_context, HANDLER_NONE); return handler.WriteMinidump();}bool ExceptionHandler::WriteMinidumpWithException( DWORD requesting_thread_id, EXCEPTION_POINTERS *exinfo, MDRawAssertionInfo *assertion) { // Give user code a chance to approve or prevent writing a minidump. If the // filter returns false, don't handle the exception at all. If this method // was called as a result of an exception, returning false will cause // HandleException to call any previous handler or return // EXCEPTION_CONTINUE_SEARCH on the exception thread, allowing it to appear // as though this handler were not present at all. if (filter_ && !filter_(callback_context_, exinfo, assertion)) { return false; } bool success = false; if (minidump_write_dump_) { HANDLE dump_file = CreateFileW(next_minidump_path_c_, GENERIC_WRITE, 0, // no sharing NULL, CREATE_NEW, // fail if exists FILE_ATTRIBUTE_NORMAL, NULL); if (dump_file != INVALID_HANDLE_VALUE) { MINIDUMP_EXCEPTION_INFORMATION except_info; except_info.ThreadId = requesting_thread_id; except_info.ExceptionPointers = exinfo; except_info.ClientPointers = FALSE; // Add an MDRawBreakpadInfo stream to the minidump, to provide additional // information about the exception handler to the Breakpad processor. The // information will help the processor determine which threads are // relevant. The Breakpad processor does not require this information but // can function better with Breakpad-generated dumps when it is present. // The native debugger is not harmed by the presence of this information. MDRawBreakpadInfo breakpad_info; breakpad_info.validity = MD_BREAKPAD_INFO_VALID_DUMP_THREAD_ID | MD_BREAKPAD_INFO_VALID_REQUESTING_THREAD_ID; breakpad_info.dump_thread_id = GetCurrentThreadId(); breakpad_info.requesting_thread_id = requesting_thread_id; // Leave room in user_stream_array for a possible assertion info stream. MINIDUMP_USER_STREAM user_stream_array[2]; user_stream_array[0].Type = MD_BREAKPAD_INFO_STREAM; user_stream_array[0].BufferSize = sizeof(breakpad_info); user_stream_array[0].Buffer = &breakpad_info; MINIDUMP_USER_STREAM_INFORMATION user_streams; user_streams.UserStreamCount = 1; user_streams.UserStreamArray = user_stream_array; if (assertion) { user_stream_array[1].Type = MD_ASSERTION_INFO_STREAM; user_stream_array[1].BufferSize = sizeof(MDRawAssertionInfo); user_stream_array[1].Buffer = assertion; ++user_streams.UserStreamCount; } // The explicit comparison to TRUE avoids a warning (C4800). success = (minidump_write_dump_(GetCurrentProcess(), GetCurrentProcessId(), dump_file, MiniDumpNormal, exinfo ? &except_info : NULL, &user_streams, NULL) == TRUE); CloseHandle(dump_file); } } if (callback_) { success = callback_(dump_path_c_, next_minidump_id_c_, callback_context_, exinfo, assertion, success); } return success;}void ExceptionHandler::UpdateNextID() { GUID id; CoCreateGuid(&id); next_minidump_id_ = GUIDString::GUIDToWString(&id); next_minidump_id_c_ = next_minidump_id_.c_str(); wchar_t minidump_path[MAX_PATH]; swprintf(minidump_path, MAX_PATH, L"%s\\%s.dmp", dump_path_c_, next_minidump_id_c_); // remove when VC++7.1 is no longer supported minidump_path[MAX_PATH - 1] = L'\0'; next_minidump_path_ = minidump_path; next_minidump_path_c_ = next_minidump_path_.c_str();}} // namespace google_breakpad
⌨️ 快捷键说明
复制代码Ctrl + C
搜索代码Ctrl + F
全屏模式F11
增大字号Ctrl + =
减小字号Ctrl + -
显示快捷键?