config.h

周立功LPC213X开发板光盘资料.... 包含模板,实例代码

/****************************************Copyright (c)**************************************************
**                               Guangzou ZLG-MCU Development Co.,LTD.
**                                      graduate school
**                                 http://www.zlgmcu.com
**
**--------------File Info-------------------------------------------------------------------------------
** File Name: config.h
** Last modified Date:  2004-09-17
** Last Version: 1.0
** Descriptions: User Configurable File
**
**------------------------------------------------------------------------------------------------------
** Created By: Chenmingji
** Created date:   2004-09-17
** Version: 1.0
** Descriptions: First version
**
**------------------------------------------------------------------------------------------------------
** Modified by:
** Modified date:
** Version:
** Descriptions:
**
********************************************************************************************************/
#ifndef __CONFIG_H 
#define __CONFIG_H
//这一段无需改动
//This segment should not be modified
#ifndef TRUE
#define TRUE  1
#endif

#ifndef FALSE
#define FALSE 0
#endif

typedef unsigned char  uint8;                   /* defined for unsigned 8-bits integer variable 	无符号8位整型变量  */
typedef signed   char  int8;                    /* defined for signed 8-bits integer variable		有符号8位整型变量  */
typedef unsigned short uint16;                  /* defined for unsigned 16-bits integer variable 	无符号16位整型变量 */
typedef signed   short int16;                   /* defined for signed 16-bits integer variable 		有符号16位整型变量 */
typedef unsigned int   uint32;                  /* defined for unsigned 32-bits integer variable 	无符号32位整型变量 */
typedef signed   int   int32;                   /* defined for signed 32-bits integer variable 		有符号32位整型变量 */
typedef float          fp32;                    /* single precision floating point variable (32bits) 单精度浮点数（32位长度） */
typedef double         fp64;                    /* double precision floating point variable (64bits) 双精度浮点数（64位长度） */

/********************************/
/*      uC/OS-II specital code  */
/*      uC/OS-II的特殊代码      */
/********************************/

#define     USER_USING_MODE    0x10                    /*  User mode ,ARM 32BITS CODE 用户模式,ARM代码                  */
// 
                                                     /*  Chosen one from 0x10,0x30,0x1f,0x3f.只能是0x10,0x30,0x1f,0x3f之一       */
#include "Includes.h"


/********************************/
/*      ARM的特殊代码           */
/*      ARM specital code       */
/********************************/
//这一段无需改动
//This segment should not be modify

#include    "LPC2294.h"


/********************************/
/*     应用程序配置             */
/*Application Program Configurations*/
/********************************/
//以下根据需要改动
//This segment could be modified as needed.
#include    <stdio.h>
#include    <ctype.h>
#include    <stdlib.h>
#include    <setjmp.h>
#include    <rt_misc.h>


/********************************/
/*     本例子的配置             */
/*Configuration of the example */
/********************************/
/* System configuration .Fosc、Fcclk、Fcco、Fpclk must be defined */
/* 系统设置, Fosc、Fcclk、Fcco、Fpclk必须定义*/
#define Fosc            11059200                    //Crystal frequence,10MHz~25MHz，should be the same as actual status. 
						    //应当与实际一至晶振频率,10MHz~25MHz，应当与实际一至
#define Fcclk           (Fosc * 4)                  //System frequence,should be (1~32)multiples of Fosc,and should be equal or less  than 60MHz. 
						    //系统频率，必须为Fosc的整数倍(1~32)，且<=60MHZ
#define Fcco            (Fcclk * 4)                 //CCO frequence,should be 2、4、8、16 multiples of Fcclk, ranged from 156MHz to 320MHz. 
						    //CCO频率，必须为Fcclk的2、4、8、16倍，范围为156MHz~320MHz
#define Fpclk           (Fcclk / 4) * 1             //VPB clock frequence , must be 1、2、4 multiples of (Fcclk / 4).
						    //VPB时钟频率，只能为(Fcclk / 4)的1、2、4倍

#include    "target.h"              //This line may not be deleted 这一句不能删除
#include    "..\..\Arm_Pc\pc.h"

#include  "i2c.h"
#define	  CAT1025 0xA0	/* 定义I2C器件地址 */
#endif
/*********************************************************************************************************
**                            End Of File
********************************************************************************************************/