readme.txt

卫星接受机控制卫星和LCD显示

/******************************************************************************/
project name:    lc_odu_zte
hardware base:   15G lc odu
fuction:         the application software for BB
author:          wang.ping
version:         1.001
beginning data:  October 20th in 2007
accomplish data: January 31th,2008
/******************************************************************************/


/******************************************************************************/
Head files:
board.h:    the definition of the signals on the board.
defines.h:  the definition of all global defines
vars.h   :  declare all the global parameters
hardctrl.h: declare the extern functions in lcodu_hardctrl.c
usart.h  :  declare the extern functions in lcodu_msg.c
spi.h    :  declare the extern functions in lcodu_spi.c
/******************************************************************************/

/******************************************************************************/
Source files:
cstartup.s79  :    Generic CStartup for IAR No Use REMAP
interrupt.s79 :    MSR Read and Write
lcodu_cstart.c:    Low level initializations written in C for Tools
lcodu_hardctrl.c:  execute hardware actions (set attenuation,mute,write flash,
                   read flash,ect. )
lcodu_init.c  :    initiate mcu(timer0,timer1,pio,irq,usart0,usart1,adc and RTT)
lcodu_interrupt.c: all the interrupt service routines are here(timer0,timer1,
                   irq0,irq1,usart0,usart1,adc)
lcodu_msg.c   :    handle the usart communications,including searching frames,
                   unpacking frames,crc cheching,crc calculating,getting commands,
                   handling commands,packing messages,loading frames,sending
                   frames,and transfering the receiving and translating messages
                   to the other USART port.
lcodu_spi.c   :    The operation about SPI port.Including SPI initiation,TX/RX RF 
                   PLL initiation and DAC control.
                   There are two different types of PLL,and their initiation and 
                   control routines differs.
lcodu_main.c  :    odu initiation and running control which handled in main loop,
                   and main fuction.
/******************************************************************************/


/******************************************************************************/
functions in lcodu_hardctrl.c:
//*-----------------------------------------------------------------------------
//* Function Name       : AT91F_Flash_Init
//* Object              : flash initiation
//* autor               : wang ping
//* Input Parameters    : none
//* Output Parameters   : none.
//*-----------------------------------------------------------------------------

//*-----------------------------------------------------------------------------
//* Function Name       : at91f_flash_ready
//* Object              : Wait the flash ready.Reset flash if the waiting time 
                          exceding the deadline.
//* autor               : wang ping
//* Input Parameters    : none
//* Output Parameters   : status:the status of the flash.
//*-----------------------------------------------------------------------------

//*-----------------------------------------------------------------------------
//* Function Name       : at91f_flash_write
//* Object              : Write in one or two Flash page located in AT91C_IFLASH, 
//*                       size in 32 bits
//* autor               : wang ping
//* Input Parameters    : Flash_Address: start at 0x0010 0000; 
                          size: in byte,less than 256 bytes
//*                       buff:the bytes to be write to flash          
//* Output Parameters   : ture:write correctly; false:error happens..
//*-----------------------------------------------------------------------------

//*-----------------------------------------------------------------------------
//* Function Name       : at91f_flash_read
//* Object              : Read data located in AT91C_IFLASH, size in 8 bits
//* autor               : wang ping
//* Input Parameters    : Flash_Address: start at 0x0010 0000; 
                          size: in byte,less than 256 bytes
//*                       buff:the bytes got from the flash          
//* Output Parameters   : true.
//*-----------------------------------------------------------------------------

//*-----------------------------------------------------------------------------
//* Function Name       : reset_pro
//* Object              : reset the flash
//* autor               : wang ping
//* Input Parameters    : c=1:software reset; c=0:hardware reset          
//* Output Parameters   : none.
//*-----------------------------------------------------------------------------

//*-----------------------------------------------------------------------------
//* Function Name       : set_att
//* Object              : set the attenuation
//* autor               : wang ping
//* Input Parameters    : chn=1:set att1; chn=0:set att0          
//*                     : att(0~31),the attenuation value
//* Output Parameters   : 0:the attenuation was set correctly;
//*                       others:something unexpected taken place.
//*-----------------------------------------------------------------------------

//*-----------------------------------------------------------------------------
//* Function Name       : set_mute
//* Object              : set the tx rf muted or unmuted
//* autor               : wang ping
//* Input Parameters    : v=1(TX_MUTED),mute the tx rf        
//*                     : v=0(TX_NOTMUTED),unmute the tx rf
//* Output Parameters   : 0:the attenuation was set correctly;
//*                       others:v is invalidity
//*-----------------------------------------------------------------------------
/******************************************************************************/


/******************************************************************************/
functions in lcodu_init.c:
//*-----------------------------------------------------------------------------
//* Function Name       : ADC_int
//* Object              : initiate the ADC device.Using PDC and interrupt.
//*                     : And initiate TC2.TC2 is the trigger,Auto mode.
//* autor               : wang ping
//* Input Parameters    : none
//* Output Parameters   : none
//*-----------------------------------------------------------------------------

//*-----------------------------------------------------------------------------
//* Function Name       : IRQ_int
//* Object              : initiate IRQ interrupts,IRQ0 is TX RF PLL alarm interrupt 
//*                     : IRQ1 is RX RF PLL alarm interrupt.Negative edge trige.
//* autor               : wang ping
//* Input Parameters    : none
//* Output Parameters   : none
//*-----------------------------------------------------------------------------

//*-----------------------------------------------------------------------------
//* Function Name       : TC_int
//* Object              : initiate TC0 and TC1.
//* autor               : wang ping
//* Input Parameters    : none
//* Output Parameters   : none
//*-----------------------------------------------------------------------------

//*-----------------------------------------------------------------------------
//* Function Name       : US_int
//* Object              : initiate US0 and US1.
//* autor               : wang ping
//* Input Parameters    : none
//* Output Parameters   : none
//*-----------------------------------------------------------------------------

//*-----------------------------------------------------------------------------
//* Function Name       : init_pio
//* Object              : initiate PIO,enable PIO clock.
//* autor               : wang ping
//* Input Parameters    : none
//* Output Parameters   : none
//*-----------------------------------------------------------------------------

//*-----------------------------------------------------------------------------
//* Function Name       : initiation
//* Object              : initiate RTT.And it's the entrance of the initiation
//* autor               : wang ping
//* Input Parameters    : none
//* Output Parameters   : none
//*-----------------------------------------------------------------------------
/******************************************************************************/

/******************************************************************************/
functions in lcodu_interrupt.c:
//*-----------------------------------------------------------------------------
//* Function Name       : timer0_c_irq_handler
//* Object              : Timer0 interrupt service routine,8ms,
//*                       used for rssi reporting
//* autor               : wang ping
//* Input Parameters    : none
//* Output Parameters   : none
//*-----------------------------------------------------------------------------

//*-----------------------------------------------------------------------------
//* Function Name       : timer1_c_irq_handler
//* Object              : Timer1 interrupt service routine,
//*                       used for cheching the TX input alarm
//* autor               : wang ping
//* Input Parameters    : none
//* Output Parameters   : none
//*-----------------------------------------------------------------------------

//*-----------------------------------------------------------------------------
//* Function Name       : US0_c_irq_handler
//* Object              : USART0 interrupt service routine,
//*                       reset the DMA buffer pointer.
//* autor               : wang ping
//* Input Parameters    : none
//* Output Parameters   : none
//*-----------------------------------------------------------------------------

//*-----------------------------------------------------------------------------
//* Function Name       : US1_c_irq_handler
//* Object              : USART1 interrupt service routine,
//*                       reset the DMA buffer pointer.
//* autor               : wang ping
//* Input Parameters    : none
//* Output Parameters   : none
//*-----------------------------------------------------------------------------

//*-----------------------------------------------------------------------------
//* Function Name       : ADC_c_irq_handler
//* Object              : ADC interrupt service routine,
//*                       reset the ADC DMA buffer pointer.
//*                       calculate the average value of the 16 converts of each 
//*                       channel 
//* autor               : wang ping
//* Input Parameters    : none
//* Output Parameters   : none
//*-----------------------------------------------------------------------------

//*-----------------------------------------------------------------------------
//* Function Name       : IRQ0_c_irq_handler
//* Object              : tx synthlock alarm
//*                       negative edge trige
//* autor               : wang ping  
//* Input Parameters    : none
//* Output Parameters   : none
//*-----------------------------------------------------------------------------

//*-----------------------------------------------------------------------------
//* Function Name       : IRQ1_c_irq_handler
//* Object              : rx synthlock alarm
//*                       negative edge trige
//* autor               : wang ping  29/10/2007
//* Input Parameters    : none
//* Output Parameters   : none
//*-----------------------------------------------------------------------------
/******************************************************************************/


/******************************************************************************/
functions in lcodu_msg.c:
//*-----------------------------------------------------------------------------
//* Function Name       : send_msg_USART0
//* Object              : send the newly loaded messages stored in us0_send_dma[].
//*                       send_point is to memory the pointer of the first byte
//*                       to be sended. tx_wr_pt is to memory the writing pointer
//*                       of the us0_send_dma[]
//* autor               : wang ping  
//* Input Parameters    : none
//* Output Parameters   : none
//*-----------------------------------------------------------------------------

//*-----------------------------------------------------------------------------