install-slog.in

MPICH是MPI的重要研究,提供了一系列的接口函数,为并行计算的实现提供了编程环境.

#!/bin/sh
#
# This script has to be built by configure.
#
# This is a script to install SLOG-API. It can be invoked with
#
#    make install  ( if you used -prefix at configure time ) 
#
#    or,
#
#    make install PREFIX=Path_to_the_installation_of_SLOG-API
#
# in the top-level SLOG-API __build__ directory which could be the same 
# or different from the source directory
#

MAKE="@MAKE@"

# Source locations
top_srcdir=@top_srcdir@

# Build locations
includebuild_dir=@includebuild_dir@
libbuild_dir=@libbuild_dir@
binbuild_dir=@binbuild_dir@
manbuild_dir=@manbuild_dir@
htmlbuild_dir=@htmlbuild_dir@

# Installation directories: Default paths (set at configure time)
prefix=@prefix@
exec_prefix=@exec_prefix@
includedir=@includedir@
libdir=@libdir@
bindir=@bindir@
sbindir=@sbindir@
mandir=@mandir@
htmldir=@htmldir@

# File access mode
MODE=0664
XMODE=0775
replace=1
# set failmode to soft to let failures accumulate
failmode="hard"
# chmod can fail for various reasons.  Let it?
chmodfailmode="hard"
Show=eval
# set verbose to 0 to suppress success output
verbose=0
just_testing=0
prefix_override=0

# filelist records files that have been installed
filelist=""
# dirlist records directories created
dirlist=""
# initialize the error code return counter
errs=0

# The variable, appendUninstall, is to signal this script to allow uninstall
# information to append to an existing uninstall file.	Default is NO.
appendUninstall=0

# Set uninstall file
# Should replace basename which is NOT available on all machine
# For now, recent Unix machine should be new enough to have basename ?
# Uninstall filename
if [ -z "$UNINSTALLFILE" ] ; then
    INSTALL_base=`basename $0`
    UNINSTALL_base=`echo $INSTALL_base | sed -e 's/install/uninstall/'`
    UNINSTALLFILE=$DESTDIR${sbindir}/${UNINSTALL_base}
fi

# Update the $prefix if necessary
for arg in "$@" ; do
    case "$arg" in
        -prefix=*)
            prefix=`echo $arg | sed -e 's/-prefix=//'`
            prefix_override=1
            ;;
        -uninstall=*)
            UNINSTALLFILE=`echo A$arg | sed -e 's/A-uninstall=//g'`
            appendUninstall=1
            ;;
        -mode=*)
            MODE=`echo $arg | sed -e 's/-mode=//g'` 
            ;;
        -xmode=*)
            XMODE=`echo $arg | sed -e 's/-xmode=//g'`
            ;;
        -echo)                    set -x ;;
        -noreplace|-no_replace)   replace=0 ;;
        -replace)                 replace=1 ;;
        -no_verbose|-noverbose)   verbose=0 ;;
        -verbose)                 verbose=1 ;;
        -soft)                    failmode="soft" ; chmodfailmode="soft" ;;
        -hard)                    failmode="hard" ; chmodfailmode="hard" ;;
        -softchmod)               chmodfailmode="soft" ;;
        -help|-u|-usage|-h)
cat <<EOF
Install Jumsphot-3 into $prefix.
-prefix=path     - Destination directory.
-uninstall=file	 - File to append uninstall information to
-mode=nnnn       - mode for regular files.  Default is $MODE .
-xmode=nnnn      - mode for execuables and directories.  Default is $XMODE .
-noreplace	 - Do not replace files found in the installation directory
-soft		 - Do not abort on failure
-softchmod	 - Do not abort on failure of chmod
EOF
            exit 1
            ;;
        *)
            echo "install-slog: Unrecognized argument $arg ."
            exit 1
            ;;
    esac
done


if [ "$SHELL_ECHO" = "on" ] ; then
    set -x
fi


##############################################################################
#
# Start of Routines
#
##############################################################################

# We could use install, but install is too different and too hard to 
# test.  So here are the routines to copy file, make directories, and 
# replace #...# and @...@ in files
CP=cp
#
CopyFile() {
if [ -z "$3" ] ; then
    mode=$MODE
else
    mode=$3
fi
dest=$DESTDIR$2
if [ -d $dest ] ; then
    dest=$dest/`basename $1`
else
    dest=$dest
fi
if [ $replace = 0 -a -f $dest ] ; then
    if [ $verbose = 1 ] ; then echo "$dest exists; not changed" ; fi
elif [ -d $1 ] ; then
    echo ">>> $1 is a directory; not copied <<<"
    errs=`expr $errs + 1`
    if [ $failmode = "hard" ] ; then exit 1 ; fi
elif [ ! -f $1 ] ; then
    echo "**File $1 does not exist (or is not a regular file)!"
    errs=`expr $errs + 1`
    if [ $failmode = "hard" ] ; then exit 1 ; fi
else
    if [ $verbose = 1 ] ; then echo "Copying $1 to $dest" ; fi
    # We don't delete the file in the event that we are copying the
    # file over itself (we SHOULD check for that separately, by checking 
    # that directories are distinct)
    #if [ -f $dest ] ; then $Show /bin/rm -f $dest ; fi
    $Show $CP $1 $dest
    rc=$?
    if [ $rc != 0 ] ; then
        echo "**Error copying file $1 to $dest **"
        errs=`expr $errs + 1`
        if [ $failmode = "hard" ] ; then exit $rc ; fi
    else
        # store the destination filename copied
        filelist="$filelist $dest"
    fi
    $Show chmod $mode $dest
    rc=$?
    if [ $rc != 0 ] ; then
        echo "**Error setting mode on file $dest**"
        errs=`expr $errs + 1`
        if [ $chmodefailmode = "hard" ] ; then exit $rc ; fi
    fi
fi
}


#
# A version of copy file that preserves file dates
CPRP=cp
CopyFileP() {
    CP="$CPRP -p"
    CopyFile $1 $2 $3
    CP=cp
}


#
# A version of recursive directory copy that preserves file dates
# but does NOT copy CVS, old, tex directory.
# $1 is the src directory, $2 is dest directory, $3 is $MODE or $XMODE
CopyDirRecurP() {
if [ -n "$1" -a -n "$2" ] ; then
    if [ -d $1 ] ; then
        MkDir $2
        # use $4 as a local variable
        # & set it as the original PWD before "cd $1"
        set $1 $2 ${3:-$MODE} `pwd`
        cd $1
        for file in * ; do
            if [ -f $file -a ! -f $DESTDIR$2/$file ] ; then
                CopyFileP $file $2/$file $3
            fi
        done
        for dir in * ; do
            if [ -d $dir \
                 -a "$dir" != "CVS" -a "$dir" != "old" \
                 -a "$dir" != "tex" \
               ] ; then
                CopyDirRecurP $dir $2/$dir $3
            fi
        done
        # cd back where it comes from
        # counter the effect of "cd $1" above,
        # so "for" loop stiil works
        cd $4
    fi 
fi
}



#
# Make the given directory.  This handles building intermediate directories
# as required, and maintains a list of created directories in dirlist.
MkDir() {
if [ ! -d $DESTDIR$1 ] ; then
    dir=`echo $DESTDIR$1 | sed 's%/% /%g'`
    path_to_date=''
    for path in $dir ; do
        path_to_date="$path_to_date$path"
        if [ ! -d $path_to_date ] ; then
            if [ $verbose = 1 ] ; then echo "Creating directory $1" ; fi
            $Show "mkdir $path_to_date"
            rc=$?
            if [ $rc != 0 ] ; then
                echo "**Error making directory $1**"
                errs=`expr $errs + 1`
                if [ $failmode = "hard" ] ; then exit $rc ; fi
                echo "Failed to create directory $path_to_date"
                exit 1
            else
                # Note that we store in inverse order
                dirlist="$1 $dirlist"
            fi
            $Show chmod $XMODE $path_to_date
            rc=$?
            if [ $rc != 0 ] ; then
                echo "**Error setting mode on directory $path_to_date**"
                errs=`expr $errs + 1`
                if [ $chmodfailmode = "hard" ] ; then exit $rc ; fi
            fi
        fi
    done
fi
}

##############################################################################
#
# End of Routines
#
##############################################################################


if [ ! -n "$prefix" ] ; then
  echo "Set an installation location with -prefix=<location> ."
  exit 1
fi
if [ $verbose = 1 ] ; then
    echo "Install into $prefix"
fi

if [ -d $prefix ] ; then
    if [ $verbose = 1 ] ; then echo "using existing directory $prefix" ; fi
else
    MkDir $prefix
fi

# echo "prefix = $prefix"
# echo "exec_prefix = $exec_prefix"
# echo "includedir = $includedir"
# echo "libdir = $libdir"
# echo "bindir = $bindir"
# echo "mandir = $mandir"
# echo "htmldir = $htmldir"

if [ "$prefix_override" = 1 ] ; then
    includedir=$prefix/include
    libdir=$prefix/lib
    bindir=$prefix/bin
    sbindir=$prefix/sbin
    docdir=$prefix/doc
    mandir=$prefix/man
    htmldir=$prefix/html
    if [ $appendUninstall = 0 ] ; then
	UNINSTALLFILE=$DESTDIR${sbindir}/${UNINSTALL_base}
    fi
fi

MkDir $sbindir

if [ -n "$binbuild_dir" ] ; then
    if [ -d $binbuild_dir ] ; then
        MkDir $bindir
        CopyFileP $binbuild_dir/slog_printbbufs $bindir/slog_print $XMODE
    fi
fi

CopyDirRecurP $libbuild_dir $libdir $MODE
CopyDirRecurP $includebuild_dir $includedir $MODE
CopyDirRecurP $manbuild_dir $mandir $MODE
CopyDirRecurP $htmlbuild_dir $htmldir $MODE

# Remove old uninstall file & Prepare the UNINSTALLFILE for appending
if [ $appendUninstall = 0 -a -f $UNINSTALLFILE ] ; then
    /bin/rm -f $UNINSTALLFILE
fi
#
# Open an uninstall file and force strong echo if one does NOT exist
if [ ! -f $UNINSTALLFILE ] ; then
    cat > $UNINSTALLFILE <<EOF
#! /bin/sh
set -x
EOF
fi

chmod u+x $UNINSTALLFILE

# Add the files to be removed to the UNINSTALLFILE
for file in $filelist ; do
    echo "/bin/rm -f $file" >> $UNINSTALLFILE
done
echo "/bin/rm -f $UNINSTALLFILE" >> $UNINSTALLFILE

# Add the directories to be removed to the UNINSTALLFILE
for dir in $dirlist ; do
    echo "if [ -d $dir ] ; then rmdir $dir ; fi" >> $UNINSTALLFILE
done

#
echo "Installed SLOG-API in $prefix"
echo "$UNINSTALLFILE may be used to remove the installation"
#
if [ $errs -gt 0 ] ; then
    rc=1
else
    rc=0
fi
exit $rc