sc_unsigned_subref.inc
来自「基于4个mips核的noc设计」· INC 代码 · 共 294 行
INC
294 行
/***************************************************************************** The following code is derived, directly or indirectly, from the SystemC source code Copyright (c) 1996-2002 by all Contributors. All Rights reserved. The contents of this file are subject to the restrictions and limitations set forth in the SystemC Open Source License Version 2.3 (the "License"); You may not use this file except in compliance with such restrictions and limitations. You may obtain instructions on how to receive a copy of the License at http://www.systemc.org/. Software distributed by Contributors under the License is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License for the specific language governing rights and limitations under the License. *****************************************************************************//***************************************************************************** sc_unsigned_subref.h -- Proxy class that is declared in sc_unsigned.h. Original Author: Ali Dasdan, Synopsys, Inc. *****************************************************************************//***************************************************************************** MODIFICATION LOG - modifiers, enter your name, affiliation, date and changes you are making here. Name, Affiliation, Date: Description of Modification: *****************************************************************************/// ----------------------------------------------------------------------------// CLASS : sc_unsigned_subref_r//// Proxy class for sc_unsigned part selection (r-value only).// ----------------------------------------------------------------------------// implicit conversion to sc_unsignedsc_unsigned_subref_r::operator sc_unsigned () const{ return sc_unsigned( &m_obj, m_left, m_right );}// explicit conversionsintsc_unsigned_subref_r::to_int() const{ sc_unsigned a( &m_obj, m_left, m_right ); return a.to_int();}unsigned intsc_unsigned_subref_r::to_uint() const{ sc_unsigned a( &m_obj, m_left, m_right ); return a.to_uint();}longsc_unsigned_subref_r::to_long() const{ sc_unsigned a( &m_obj, m_left, m_right ); return a.to_long();}unsigned longsc_unsigned_subref_r::to_ulong() const{ sc_unsigned a( &m_obj, m_left, m_right ); return a.to_ulong();}int64sc_unsigned_subref_r::to_int64() const{ sc_unsigned a( &m_obj, m_left, m_right ); return a.to_int64();}uint64sc_unsigned_subref_r::to_uint64() const{ sc_unsigned a( &m_obj, m_left, m_right ); return a.to_uint64();}doublesc_unsigned_subref_r::to_double() const{ sc_unsigned a( &m_obj, m_left, m_right ); return a.to_double();}// explicit conversion to character stringconst sc_stringsc_unsigned_subref_r::to_string( sc_numrep numrep ) const{ sc_unsigned a( length() ); a = *this; return a.to_string( numrep );}const sc_stringsc_unsigned_subref_r::to_string( sc_numrep numrep, bool w_prefix ) const{ sc_unsigned a( length() ); a = *this; return a.to_string( numrep, w_prefix );}// ----------------------------------------------------------------------------// CLASS : sc_unsigned_subref//// Proxy class for sc_unsigned part selection (r-value and l-value).// ----------------------------------------------------------------------------// assignment operatorssc_unsigned_subref& sc_unsigned_subref::operator = ( const sc_unsigned_subref_r& a ){ return operator = ( SCAST<sc_unsigned>( a ) );}sc_unsigned_subref& sc_unsigned_subref::operator = ( const sc_unsigned_subref& a ){ if( this == &a ) { return *this; } return operator = ( static_cast<sc_unsigned>( a ) );}sc_unsigned_subref& sc_unsigned_subref::operator = ( const sc_unsigned& v ){ int l = sc_min( m_left, v.nbits - 1 + m_right ); for( int i = m_right; i <= l; ++ i ) { m_obj.set( i, v.test( i - m_right ) ); } return *this;}sc_unsigned_subref& sc_unsigned_subref::operator = ( const sc_signed_subref_r& v ){ return operator = ( static_cast<sc_signed>( v ) );}sc_unsigned_subref& sc_unsigned_subref::operator = ( const sc_signed& v ){ int l = sc_min( m_left, v.nbits - 1 + m_right ); for( int i = m_right; i <= l; ++ i ) { m_obj.set( i, v.test( i - m_right ) ); } return *this;}sc_unsigned_subref& sc_unsigned_subref::operator = ( unsigned long v ){ for( int i = m_right; i <= m_left; ++ i ) { m_obj.set( i, static_cast<bool>( v & 1 ) ); v >>= 1; } return *this;}sc_unsigned_subref& sc_unsigned_subref::operator = ( long v ) { unsigned long v2 = (unsigned long) v; for( int i = m_right; i <= m_left; ++ i ) { m_obj.set( i, static_cast<bool>( v2 & 1 ) ); v2 >>= 1; } return *this;}sc_unsigned_subref& sc_unsigned_subref::operator = ( uint64 v ){ for( int i = m_right; i <= m_left; ++ i ) { m_obj.set( i, static_cast<bool>( v & 1 ) ); v >>= 1; } return *this;}sc_unsigned_subref& sc_unsigned_subref::operator = ( int64 v ) { uint64 v2 = (uint64) v; for( int i = m_right; i <= m_left; ++ i ) { m_obj.set( i, static_cast<bool>( v2 & 1 ) ); v2 >>= 1; } return *this;}sc_unsigned_subref& sc_unsigned_subref::operator = ( double v ){ is_bad_double(v); int nb = m_left - m_right + 1; int nd = DIV_CEIL(nb);#ifdef SC_MAX_NBITS unsigned long d[MAX_NDIGITS];#else unsigned long *d = new unsigned long[nd];#endif if (v < 0) v = -v; register int i = 0; while (floor(v) && (i < nd)) {#ifndef WIN32 d[i++] = (unsigned long) floor(remainder(v, DIGIT_RADIX));#else d[i++] = (unsigned long) floor(fmod(v, DIGIT_RADIX));#endif v /= DIGIT_RADIX; } vec_zero(i, nd, d); unsigned long val = 1; // Bit value. int j = 0; // Current digit in d. i = 0; // Current bit in d. while (i < nb) { m_obj.set(i + m_right, (bool) (d[j] & val)); ++i; if (i % BITS_PER_DIGIT == 0) { val = 1; ++j; } else val <<= 1; }#ifndef SC_MAX_NBITS delete [] d;#endif return *this;}sc_unsigned_subref&sc_unsigned_subref::operator = ( const sc_int_base& a ){ return operator = ( (int64) a );}sc_unsigned_subref&sc_unsigned_subref::operator = ( const sc_uint_base& a ){ return operator = ( (uint64) a );}// other methodsvoidsc_unsigned_subref::scan( istream& is ){ sc_string s; is >> s; *this = s.c_str();}// End of file
⌨️ 快捷键说明
复制代码Ctrl + C
搜索代码Ctrl + F
全屏模式F11
增大字号Ctrl + =
减小字号Ctrl + -
显示快捷键?