changelog-9197

来自「基于4个mips核的noc设计」· 代码 · 共 1,769 行 · 第 1/5 页

	* configure.in: Don't clear OPCODES when --enable-commonbfdlib is
	used on HP/UX.
	* configure: Rebuild.

Fri Apr 25 14:22:08 1997  H.J. Lu  <[e-mail]>

	* Makefile.in (maintainer-clean realclean): Change *.info*
	to binutils.info* to save sysroff.info.

Tue Apr 15 13:42:22 1997  Ian Lance Taylor  <[e-mail]>

	* Makefile.in (INSTALL): Set to @INSTALL@.
	(INSTALL_XFORM, INSTALL_XFORM1): Remove.
	(install): Depend upon installdirs.  Use $(program_transform_name)
	directly, rather than using $(INSTALL_XFORM) and
	$(INSTALL_XFORM1).
	(installdirs): New target.
	(install-info): Run mkinstalldirs.

Mon Apr 14 11:52:39 1997  Ian Lance Taylor  <[e-mail]>

	* Makefile.in (INSTALL): Change install.sh to install-sh.

	From Thomas Graichen <[e-mail]>:
	* Makefile.in: Always use $(SHELL) when running move-if-change.
	* configure.in: Use ${CONFIG_SHELL} when running $ac_config_sub.
	* configure: Rebuild.

Fri Apr  4 13:28:02 1997  Ian Lance Taylor  <[e-mail]>

	* configure.in: Add AC_FUNC_ALLOCA.
	* configure, config.in: Rebuild.
	* bucomm.h: Add alloca handling, copied from gas/as.h.
	* dlltool.c: Add #pragma alloca for AIX to start of file.
	* nlmconv.c: Likewise.

	* Makefile.in (distclean): Remove site.exp and site.bak.  Remove
	everything that clean removes.

Thu Apr  3 13:18:39 1997  Ian Lance Taylor  <[e-mail]>

	* Makefile.in (VERSION): Set to 2.8.1.

	* Branched binutils 2.8.

Tue Apr  1 16:21:44 1997  Klaus Kaempf  <[e-mail]>

	* configure.com: New file.
	* config.h-vms: Remove file.
	* makefile.vms: Update for new configure scheme.

Mon Mar 31 15:30:43 1997  Philippe De Muyter  <[e-mail]>

	* objcopy.c (make_same_dates): Use statbuf, not buf, if not
	HAVE_GOOD_UTIME_H.

Fri Mar 28 17:57:53 1997  Alan Modra  <[e-mail]>

	* Makefile.in ($(OBJDUMP_PROG)): Don't link against BFDLIB twice.
	* configure.in: Add AC_ARG_ENABLE for commonbfdlib.  If it is set,
	set OPCODES to empty.
	* configure: Rebuild.

Thu Mar 27 16:03:02 1997  Ian Lance Taylor  <[e-mail]>

	Based on patch from Marty Leisner <[e-mail]>:
	* objcopy.c: Include <utime.h> or <sys/time.h>.
	(strip_options): Add "preserve-dates".
	(copy_options): Likewise.
	(copy_usage): Mention -p and --preserve-dates.
	(strip_usage): Likewise.
	(make_same_dates): New static function.
	(strip_main): Handle -p.
	(copy_main): Likewise.
	* binutils.texi, strip.1, objcopy.1: Document new option.

	addr2line.c contributed by Ulrich Lauther
	<[e-mail]>:
	* addr2line.c: New file.
	* Makefile.in: Rebuild dependencies.
 	(ADDR2LINE_PROG): New variable.
	(MANPAGES): Add addr2line.
	(PROGS): Add $(ADDR2LINE_PROG).
	(CFILES): Add addr2line.c.
	($(ADDR2LINE_PROG)): New target.
	* binutils.texi: Document addr2line.
	* addr2line.1: New file.

	* version.c (print_version): Update copyright date.

Mon Mar 24 10:52:45 1997  Andreas Schwab  <[e-mail]>

	* objdump.c (disassemble_data): Don't exit if a file cannot be
	disassembled, instead just return.

Thu Mar 20 21:16:51 1997  Jeffrey A Law  ([e-mail])

	* size.c (usage): Make definition match its prototype.
	(display_bfd, lprint_number, rprint_number): Likewise.
	(print_berkeley_format, sysv_internal_printer): Likewise.
	(print_sysv_format): Likewise.
	* nm.c (set_print_radix, set_output_format): Likewise.
	* objcopy.c (filter_bytes): Likewise.

Tue Mar 18 16:39:55 1997  H.J. Lu  <[e-mail]>

	* Many files: Add function prototypes.
	* ar.c (mri_emul, get_pos_bfd): Make static.
	* arlex.l: Include "libiberty.h".  Don't declare strdup.  Use
	xstrdup rather than strdup.
	* arparse.y (yyerror): Make argument const.  Correct typo.
	* arsup.c (strdup): Don't declare.
	(ar_save): Use xstrdup rather than strdup.
	* filemode.c: Include "bucomm.h".
	* nm.c (usage): Make static.
	(print_symname): Make format and name const.
	* objcopy.c (cat): Remove.
	(copy_archive): Make output_target const.  Use concat, not cat.
	(copy_file, simple_copy, smart_rename): Make arguments const.
	* objdump.c (read_section_stabs): Likewise.
	(print_section_stabs): Likewise.
	(display_target_tables): Don't declare getenv.
	* strings.c (strings_object_file): Change file to const.
	(print_strings): Change filename to const.
	* Makefile.in: Rebuild dependencies.

Tue Mar 18 11:37:24 1997  Ian Lance Taylor  <[e-mail]>

	* configure.in: Add BFD_NEED_DECLARATION(getenv).
	* acconfig.h: Add NEED_DECLARATION_GETENV.
	* bucomm.h (getenv): Declare if NEED_DECLARATION_GETENV.
	* configure, config.in: Rebuild.
	* nlmconv.c (getenv): Don't declare.

	* Makefile.in: Rebuild dependencies.

Sat Mar 15 15:35:56 1997  Ian Lance Taylor  <[e-mail]>

	Based on patches from Jamie Lokier <[e-mail]>:
	* objdump.c: Include "demangle.h".
	(do_demangle): New static variable.
	(usage): Mention -C/--demangle.
	(long_options): Add "demangle".
	(objdump_print_symname): New static function.
	(objdump_print_addr_with_sym): Use objdump_print_symname.
	(disassemble_bytes): Likewise.
	(dump_reloc_set): Likewise.
	(dump_symbols): Demangle symbol name.
	(main): Handle -C.
	* binutils.texi, objdump.1: Document -C/--demangle.

	* objdump.c (usage): Mention --no-show-raw-insn.
	(long_options): Add "no-show-raw-insn".
	(disassemble_bytes): Handle --no-show-raw-insn.
	* binutils.texi, objdump.1: Document --no-show-raw-insn.

Wed Mar 12 11:42:00 1997  Andreas Schwab  <[e-mail]>

	* rddbg.c (free_saved_stabs): Set the strings to NULL after being
	freed.

Fri Feb 28 17:18:45 1997  Ian Lance Taylor  <[e-mail]>

	* bucomm.c (set_default_bfd_target): New function.
	* bucomm.h (set_default_bfd_target): Declare.
	* ar.c (main): Call set_default_bfd_target.
	* nlmconv.c (main): Likewise.
	* nm.c (main): Likewise.
	* objcopy.c (main): Likewise.
	* objdump.c (main): Likewise.
	* size.c (main): Likewise.
	* strings.c (main): Likewise.
	* Makefile.in (bucomm.o): New target, to define TARGET.

Tue Feb 25 21:28:38 1997  Ian Lance Taylor  <[e-mail]>

	* objdump.c (adjust_section_vma): New static variable.
	(usage): Mention --adjust-section-vma.
	(OPTION_ADJUST_VMA): Define.
	(long_options): Add "addjust-vma".
	(display_bfd): If adjust_section_vma is not 0, add it to all the
	section addresses.
	(main): Handle OPTION_ADJUST_VMA.
	* binutils.texi, objdump.1: Document --adjust-vma.

Fri Feb 14 18:46:47 1997  Ian Lance Taylor  <[e-mail]>

	* nm.c (print_symbol): Cache the BFD as well as the symbols and
 	relocs, and don't try to use the symbols or relocs with a
 	different BFD.

Thu Feb 13 21:34:43 1997  Klaus Kaempf  ([e-mail])

	* config.h-vms: sbrk() is provided on openVMS/Alpha.
	* makefile.vms: allow compiling with current gcc snapshot.

Thu Feb 13 20:14:40 1997  Ian Lance Taylor  <[e-mail]>

	* arsup.c, coffgrok.c, dlltool.c, nlmconv.c: Use xmalloc rather
	than malloc.

Wed Feb 12 16:12:02 1997  Ian Lance Taylor  <[e-mail]>

	* objdump.c (disassemble_data): Correct VMA argument to
	find_symbol_for_address.  Improve handling of code with no symbol
	followed by code with a symbol.

Wed Feb 12 12:16:47 1997  Andreas Schwab  <[e-mail]>

	* objdump.c (disassemble_bytes): Make output of raw instructions
	work better for non-standard values of bytes_per_chunk and
	bytes_per_line.

Thu Feb  6 14:14:59 1997  Martin M. Hunt  <[e-mail]>

	* objdump.c (disassemble_bytes): Added code to allow some control
 	over the way raw instructions are displayed.

Thu Feb  6 12:36:03 1997  Ian Lance Taylor  <[e-mail]>

	* stabs.c (struct bincl_file): Add next_stack field.
	(push_bincl): Put the new file on both bincl_list and
	bincl_stack.  Clear the file_types field.
	(pop_bincl): Use the next_stack field when popping the stack.
	Don't put the file on bincl_list.
	(find_excl): Include the file name when warning about an unfound
	N_EXCL.

	* debug.c (debug_type_samep): Don't crash if we are passed NULL.

Thu Feb  6 11:54:24 1997  Alan Modra  <[e-mail]>

	* objcopy.1: Add missing space after .B.

Fri Jan 31 10:33:07 1997  Andreas Schwab  <[e-mail]>

	* objdump.c (disassemble_data): Initialize `aux.require_sec'.

Wed Jan 29 13:21:21 1997  Ian Lance Taylor  <[e-mail]>

	* objdump.c (objdump_print_value): Add skip_zeroes parameter.
	Change all callers.
	(objdump_print_addr_with_sym): Likewise.  Call objdump_print_value
	to print address.
	(objdump_print_addr): New static function.
	(objdump_print_address): Just call objdump_print_addr.
	(disassemble_bytes): Print real address, not function offset.
	Skip a certain number of leading zeroes.

	* objdump.c (disassemble_zeroes): New static variable.
	(usage): Mention --disassemble-zeroes.
	(long_options): Add "disassemble-zeroes".
	(disassemble_bytes): Check disassemble_zeroes.

Tue Jan 28 16:47:26 1997  Ian Lance Taylor  <[e-mail]>

	* objdump.c (disassemble_bytes): Don't skip zeroes if the
	disassembler has told us that we are in a branch delay slot.

Mon Jan 20 14:24:04 1997  Ian Lance Taylor  <[e-mail]>

	* size.c (berkeley_sum): Rewrite.  Skip sections which are not
	SEC_ALLOC.  Count SEC_READONLY sections as text.

Tue Jan 14 15:14:14 1997  Ian Lance Taylor  <[e-mail]>

	* Makefile.in (maintainer-clean realclean): Remove *.info*, not
	just *.info.  From H.J. Lu <[e-mail]>.

Tue Dec 31 15:42:54 1996  Ian Lance Taylor  <[e-mail]>

	* Makefile.in (ALL_CFLAGS): Add -D_GNU_SOURCE.

Fri Dec 27 11:19:26 1996  Ian Lance Taylor  <[e-mail]>

	* configure.in: Work around bug in AC_FUNC_VFORK in autoconf 2.12.
	* configure: Rebuild.

Thu Dec 19 13:11:20 1996  Ian Lance Taylor  <[e-mail]>

	Based on patch from Andrew J Klossner <[e-mail]>:
	* objcopy.c (OPTION_WEAKEN): Define.
	(copy_options): Add "weaken".
	(copy_usage): Mention --weaken.
	(weaken): New static variable.
	(filter_symbols): Handle weaken.
	(copy_object): Call filter_symbols if weaken.
	(copy_main): Handle OPTION_WEAKEN.
	* binutils.texi, objcopy.1: Document --weaken.

Wed Dec 18 22:49:13 1996  Stan Shebs  <[e-mail]>

	* mpw-make.sed: Use NewFolderRecursive for installation.

Sat Dec  7 10:17:25 1996  Jeffrey A Law  ([e-mail])

	* Makefile.in (install): Add "else true" clause to cater to
	broken "make" on some systems.

Fri Dec  6 17:21:41 1996  Ian Lance Taylor  <[e-mail]>

	* ieee.c (parse_ieee_bb): Always initialize namcopy to avoid gcc
	warning about uninitialized variable.
	(ieee_read_cxx_class): Likewise, for pf.
	(ieee_enum_type): Likewise, for i.

Tue Nov 26 17:01:25 1996  Ian Lance Taylor  <[e-mail]>

	* wrstabs.c (stab_array_type): Add casts when printing
	bfd_signed_vma values.

	* configure: Rebuild with autoconf 2.12.

Mon Nov 25 16:53:18 1996  Ian Lance Taylor  <[e-mail]>

	* objdump.c (disassemble_data): Don't crash if there is no
	symbol.

Fri Nov 22 17:29:14 1996  Andreas Schwab  <[e-mail]>

	* ar.c (open_inarch): Don't call bfd_openr with a null name.

Fri Nov  1 12:08:13 1996  Ian Lance Taylor  <[e-mail]>

	* binutils.texi: Add section on reporting bugs.

Thu Oct 31 18:20:53 1996  Ian Lance Taylor  <[e-mail]>

	* stabs.c (struct stab_handle): Add bincl_list field.
	(parse_stab): Pass value to push_bincl.  Call find_excl for
	N_EXCL.
	(struct bincl_file): Add hash, file and file_types fields.
	(push_bincl): Add hash parameter.  Save it in the new hash field.
	Save the file number in the new file field.
	(pop_bincl): Put the bincl_file on bincl_list, rather than freeing
	it.  Save the file types in the new file_types field.
	(find_excl): New static function.

	* ieee.c (ieee_lineno): Don't compare line number addresses to
	info->highaddr (undo part of October 28 patch).

Tue Oct 29 16:40:22 1996  Ian Lance Taylor  <[e-mail]>

	* objdump.c (objdump_print_value): Don't print the empty string
	for zero.

Mon Oct 28 16:58:14 1996  Ian Lance Taylor  <[e-mail]>

	* stabs.c (struct stab_handle): Add function_end field.
	(start_stab): Initialize function_end.
	(finish_stab): Pass info->function_end to debug_end_function.
	(parse_stab): If info->function_end is set, use it as the address
	which ends a function.