makefile.in

来自「基于4个mips核的noc设计」· IN 代码 · 共 865 行 · 第 1/2 页

	for i in $$list; do \
	  if test -f $(srcdir)/$$i; then file=$(srcdir)/$$i; \
	  else file=$$i; fi; \
	  ext=`echo $$i | sed -e 's/^.*\\.//'`; \
	  inst=`echo $$i | sed -e 's/\\.[0-9a-z]*$$//'`; \
	  inst=`echo $$inst | sed '$(transform)'`.$$ext; \
	  echo " $(INSTALL_DATA) $$file $(DESTDIR)$(man1dir)/$$inst"; \
	  $(INSTALL_DATA) $$file $(DESTDIR)$(man1dir)/$$inst; \
	done

uninstall-man1:
	@list='$(man1_MANS)'; \
	l2='$(man_MANS)'; for i in $$l2; do \
	  case "$$i" in \
	    *.1*) list="$$list $$i" ;; \
	  esac; \
	done; \
	for i in $$list; do \
	  ext=`echo $$i | sed -e 's/^.*\\.//'`; \
	  inst=`echo $$i | sed -e 's/\\.[0-9a-z]*$$//'`; \
	  inst=`echo $$inst | sed '$(transform)'`.$$ext; \
	  echo " rm -f $(DESTDIR)$(man1dir)/$$inst"; \
	  rm -f $(DESTDIR)$(man1dir)/$$inst; \
	done
install-man: $(MANS)
	@$(NORMAL_INSTALL)
	$(MAKE) $(AM_MAKEFLAGS) install-man1
uninstall-man:
	@$(NORMAL_UNINSTALL)
	$(MAKE) $(AM_MAKEFLAGS) uninstall-man1

# This directory's subdirectories are mostly independent; you can cd
# into them and run `make' without going through this Makefile.
# To change the values of `make' variables: instead of editing Makefiles,
# (1) if the variable is set in `config.status', edit `config.status'
#     (which will cause the Makefiles to be regenerated when you run `make');
# (2) otherwise, pass the desired values on the `make' command line.

@SET_MAKE@

all-recursive install-data-recursive install-exec-recursive \
installdirs-recursive install-recursive uninstall-recursive install-info-recursive \
check-recursive installcheck-recursive info-recursive dvi-recursive:
	@set fnord $(MAKEFLAGS); amf=$$2; \
	dot_seen=no; \
	target=`echo $@ | sed s/-recursive//`; \
	list='$(SUBDIRS)'; for subdir in $$list; do \
	  echo "Making $$target in $$subdir"; \
	  if test "$$subdir" = "."; then \
	    dot_seen=yes; \
	    local_target="$$target-am"; \
	  else \
	    local_target="$$target"; \
	  fi; \
	  (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
	   || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \
	done; \
	if test "$$dot_seen" = "no"; then \
	  $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
	fi; test -z "$$fail"

mostlyclean-recursive clean-recursive distclean-recursive \
maintainer-clean-recursive:
	@set fnord $(MAKEFLAGS); amf=$$2; \
	dot_seen=no; \
	rev=''; list='$(SUBDIRS)'; for subdir in $$list; do \
	  rev="$$subdir $$rev"; \
	  test "$$subdir" = "." && dot_seen=yes; \
	done; \
	test "$$dot_seen" = "no" && rev=". $$rev"; \
	target=`echo $@ | sed s/-recursive//`; \
	for subdir in $$rev; do \
	  echo "Making $$target in $$subdir"; \
	  if test "$$subdir" = "."; then \
	    local_target="$$target-am"; \
	  else \
	    local_target="$$target"; \
	  fi; \
	  (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
	   || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \
	done && test -z "$$fail"
tags-recursive:
	list='$(SUBDIRS)'; for subdir in $$list; do \
	  test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
	done

tags: TAGS

ID: $(HEADERS) $(SOURCES) $(LISP)
	list='$(SOURCES) $(HEADERS)'; \
	unique=`for i in $$list; do echo $$i; done | \
	  awk '    { files[$$0] = 1; } \
	       END { for (i in files) print i; }'`; \
	here=`pwd` && cd $(srcdir) \
	  && mkid -f$$here/ID $$unique $(LISP)

TAGS: tags-recursive $(HEADERS) $(SOURCES) gconfig.in $(TAGS_DEPENDENCIES) $(LISP)
	tags=; \
	here=`pwd`; \
	list='$(SUBDIRS)'; for subdir in $$list; do \
   if test "$$subdir" = .; then :; else \
	    test -f $$subdir/TAGS && tags="$$tags -i $$here/$$subdir/TAGS"; \
   fi; \
	done; \
	list='$(SOURCES) $(HEADERS)'; \
	unique=`for i in $$list; do echo $$i; done | \
	  awk '    { files[$$0] = 1; } \
	       END { for (i in files) print i; }'`; \
	test -z "$(ETAGS_ARGS)gconfig.in$$unique$(LISP)$$tags" \
	  || (cd $(srcdir) && etags $(ETAGS_ARGS) $$tags gconfig.in $$unique $(LISP) -o $$here/TAGS)

mostlyclean-tags:

clean-tags:

distclean-tags:
	-rm -f TAGS ID

maintainer-clean-tags:

distdir = $(PACKAGE)-$(VERSION)
top_distdir = $(distdir)

# This target untars the dist file and tries a VPATH configuration.  Then
# it guarantees that the distribution is self-contained by making another
# tarfile.
distcheck: dist
	-rm -rf $(distdir)
	GZIP=$(GZIP_ENV) $(TAR) zxf $(distdir).tar.gz
	mkdir $(distdir)/=build
	mkdir $(distdir)/=inst
	dc_install_base=`cd $(distdir)/=inst && pwd`; \
	cd $(distdir)/=build \
	  && ../configure --srcdir=.. --prefix=$$dc_install_base \
	  && $(MAKE) $(AM_MAKEFLAGS) \
	  && $(MAKE) $(AM_MAKEFLAGS) dvi \
	  && $(MAKE) $(AM_MAKEFLAGS) check \
	  && $(MAKE) $(AM_MAKEFLAGS) install \
	  && $(MAKE) $(AM_MAKEFLAGS) installcheck \
	  && $(MAKE) $(AM_MAKEFLAGS) dist
	-rm -rf $(distdir)
	@banner="$(distdir).tar.gz is ready for distribution"; \
	dashes=`echo "$$banner" | sed s/./=/g`; \
	echo "$$dashes"; \
	echo "$$banner"; \
	echo "$$dashes"
dist: distdir
	-chmod -R a+r $(distdir)
	GZIP=$(GZIP_ENV) $(TAR) chozf $(distdir).tar.gz $(distdir)
	-rm -rf $(distdir)
dist-all: distdir
	-chmod -R a+r $(distdir)
	GZIP=$(GZIP_ENV) $(TAR) chozf $(distdir).tar.gz $(distdir)
	-rm -rf $(distdir)
distdir: $(DISTFILES)
	-rm -rf $(distdir)
	mkdir $(distdir)
	-chmod 777 $(distdir)
	@for file in $(DISTFILES); do \
	  if test -f $$file; then d=.; else d=$(srcdir); fi; \
	  if test -d $$d/$$file; then \
	    cp -pr $$d/$$file $(distdir)/$$file; \
	  else \
	    test -f $(distdir)/$$file \
	    || ln $$d/$$file $(distdir)/$$file 2> /dev/null \
	    || cp -p $$d/$$file $(distdir)/$$file || :; \
	  fi; \
	done
	for subdir in $(SUBDIRS); do \
	  if test "$$subdir" = .; then :; else \
	    test -d $(distdir)/$$subdir \
	    || mkdir $(distdir)/$$subdir \
	    || exit 1; \
	    chmod 777 $(distdir)/$$subdir; \
	    (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir=../$(distdir) distdir=../$(distdir)/$$subdir distdir) \
	      || exit 1; \
	  fi; \
	done
	$(MAKE) $(AM_MAKEFLAGS) top_distdir="$(top_distdir)" distdir="$(distdir)" dist-info
info-am: $(INFO_DEPS)
info: info-recursive
dvi-am: $(DVIS)
dvi: dvi-recursive
check-am:
check: check-recursive
installcheck-am:
installcheck: installcheck-recursive
install-info-am: 
install-info: install-info-recursive
all-recursive-am: gconfig.h
	$(MAKE) $(AM_MAKEFLAGS) all-recursive

install-exec-am: install-binPROGRAMS
install-exec: install-exec-recursive

install-data-am: install-man
install-data: install-data-recursive

install-am: all-am
	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
install: install-recursive
uninstall-am: uninstall-binPROGRAMS uninstall-man
uninstall: uninstall-recursive
all-am: Makefile $(PROGRAMS) $(MANS) $(HEADERS) gconfig.h
all-redirect: all-recursive-am
install-strip:
	$(MAKE) $(AM_MAKEFLAGS) AM_INSTALL_PROGRAM_FLAGS=-s install
installdirs: installdirs-recursive
installdirs-am:
	$(mkinstalldirs)  $(DESTDIR)$(bindir) $(DESTDIR)$(mandir)/man1


mostlyclean-generic:

clean-generic:
	-test -z "$(CLEANFILES)" || rm -f $(CLEANFILES)

distclean-generic:
	-rm -f Makefile $(CONFIG_CLEAN_FILES)
	-rm -f config.cache config.log stamp-h stamp-h[0-9]*

maintainer-clean-generic:
	-test -z "$(BUILT_SOURCES)" || rm -f $(BUILT_SOURCES)
mostlyclean-am:  mostlyclean-hdr mostlyclean-binPROGRAMS \
		mostlyclean-compile mostlyclean-libtool \
		mostlyclean-aminfo mostlyclean-tags mostlyclean-generic

mostlyclean: mostlyclean-recursive

clean-am:  clean-hdr clean-binPROGRAMS clean-compile clean-libtool \
		clean-aminfo clean-tags clean-generic mostlyclean-am

clean: clean-recursive

distclean-am:  distclean-hdr distclean-binPROGRAMS distclean-compile \
		distclean-libtool distclean-aminfo distclean-tags \
		distclean-generic clean-am
	-rm -f libtool

distclean: distclean-recursive
	-rm -f config.status

maintainer-clean-am:  maintainer-clean-hdr maintainer-clean-binPROGRAMS \
		maintainer-clean-compile maintainer-clean-libtool \
		maintainer-clean-aminfo maintainer-clean-tags \
		maintainer-clean-generic distclean-am
	@echo "This command is intended for maintainers to use;"
	@echo "it deletes files that may require special tools to rebuild."

maintainer-clean: maintainer-clean-recursive
	-rm -f config.status

.PHONY: mostlyclean-hdr distclean-hdr clean-hdr maintainer-clean-hdr \
mostlyclean-binPROGRAMS distclean-binPROGRAMS clean-binPROGRAMS \
maintainer-clean-binPROGRAMS uninstall-binPROGRAMS install-binPROGRAMS \
mostlyclean-compile distclean-compile clean-compile \
maintainer-clean-compile mostlyclean-libtool distclean-libtool \
clean-libtool maintainer-clean-libtool install-info-am uninstall-info \
mostlyclean-aminfo distclean-aminfo clean-aminfo \
maintainer-clean-aminfo install-man1 uninstall-man1 install-man \
uninstall-man install-data-recursive uninstall-data-recursive \
install-exec-recursive uninstall-exec-recursive installdirs-recursive \
uninstalldirs-recursive all-recursive check-recursive \
installcheck-recursive info-recursive dvi-recursive \
mostlyclean-recursive distclean-recursive clean-recursive \
maintainer-clean-recursive tags tags-recursive mostlyclean-tags \
distclean-tags clean-tags maintainer-clean-tags distdir info-am info \
dvi-am dvi check check-am installcheck-am installcheck install-info-am \
install-info all-recursive-am install-exec-am install-exec \
install-data-am install-data install-am install uninstall-am uninstall \
all-redirect all-am all installdirs-am installdirs mostlyclean-generic \
distclean-generic clean-generic maintainer-clean-generic clean \
mostlyclean distclean maintainer-clean


diststuff: $(BUILT_SOURCES) info

.m.c:
	awk -f $(srcdir)/gen-c-prog.awk > ./$*.c \
	    FUNCTION=`(echo $*|sed -e 's,.*/,,g' -e 's/_bl//')`_blurb \
	    FILE=$*.m $(srcdir)/$*.m
po/POTFILES.in: @MAINT@ Makefile
	for file in $(POTFILES); do echo $$file; done | sort > tmp \
	  && mv tmp $(srcdir)/po/POTFILES.in

# Targets to rebuild dependencies in this Makefile.
# Have to get rid of DEP1 here so that "$?" later includes all sources.
DEP: dep.sed $(gprof_SOURCES) $(noinst_HEADERS) gconfig.h
	rm -f DEP1
	$(MAKE) MKDEP="$(MKDEP)" DEP1
	sed -f dep.sed < DEP1 > DEPA
	echo '# IF YOU PUT ANYTHING HERE IT WILL GO AWAY' >> DEPA
	if grep ' /' DEPA > /dev/null 2> /dev/null; then \
	  echo 'make DEP failed!'; exit 1; \
	else \
	  mv -f DEPA $@; \
	fi

DEP1: $(gprof_SOURCES)
	echo '# DO NOT DELETE THIS LINE -- mkdep uses it.' > DEP2
	echo '# DO NOT PUT ANYTHING AFTER THIS LINE, IT WILL GO AWAY.' >> DEP2
	$(MKDEP) $(INCLUDES) $(CFLAGS) $? >> DEP2
	mv -f DEP2 $@

dep.sed: dep-in.sed config.status
	objdir=`pwd`; \
	sed <$(srcdir)/dep-in.sed >dep.sed	\
		-e 's!@INCDIR@!$(INCDIR)!'	\
		-e 's!@BFDDIR@!$(BFDDIR)!'	\
		-e 's!@SRCDIR@!$(srcdir)!'	\
		-e "s!@OBJDIR@!$${objdir}!"

dep: DEP
	sed -e '/^..DO NOT DELETE THIS LINE/,$$d' < Makefile > tmp-Makefile
	cat DEP >> tmp-Makefile
	$(SHELL) $(srcdir)/../move-if-change tmp-Makefile Makefile

dep-in: DEP
	sed -e '/^..DO NOT DELETE THIS LINE/,$$d' < $(srcdir)/Makefile.in > tmp-Makefile.in
	cat DEP >> tmp-Makefile.in
	$(SHELL) $(srcdir)/../move-if-change tmp-Makefile.in $(srcdir)/Makefile.in

dep-am: DEP
	sed -e '/^..DO NOT DELETE THIS LINE/,$$d' < $(srcdir)/Makefile.am > tmp-Makefile.am
	cat DEP >> tmp-Makefile.am
	$(SHELL) $(srcdir)/../move-if-change tmp-Makefile.am $(srcdir)/Makefile.am

.PHONY: dep dep-in dep-am

# DO NOT DELETE THIS LINE -- mkdep uses it.
# DO NOT PUT ANYTHING AFTER THIS LINE, IT WILL GO AWAY.
basic_blocks.o: basic_blocks.c basic_blocks.h gprof.h \
  $(INCDIR)/ansidecl.h $(BFDDIR)/sysdep.h ../bfd/config.h \
  $(INCDIR)/fopen-same.h $(INCDIR)/filenames.h gconfig.h \
  $(INCDIR)/bin-bugs.h source.h search_list.h symtab.h \
  ../bfd/bfd.h corefile.h gmon_io.h gmon.h gmon_out.h \
  $(INCDIR)/libiberty.h sym_ids.h
call_graph.o: call_graph.c cg_arcs.h gprof.h $(INCDIR)/ansidecl.h \
  $(BFDDIR)/sysdep.h ../bfd/config.h $(INCDIR)/fopen-same.h \
  $(INCDIR)/filenames.h gconfig.h $(INCDIR)/bin-bugs.h \
  symtab.h ../bfd/bfd.h source.h search_list.h call_graph.h \
  corefile.h gmon_io.h gmon.h gmon_out.h sym_ids.h
cg_arcs.o: cg_arcs.c $(INCDIR)/libiberty.h $(INCDIR)/ansidecl.h \
  gprof.h $(BFDDIR)/sysdep.h ../bfd/config.h $(INCDIR)/fopen-same.h \
  $(INCDIR)/filenames.h gconfig.h $(INCDIR)/bin-bugs.h \
  call_graph.h symtab.h ../bfd/bfd.h source.h search_list.h \
  cg_arcs.h cg_dfn.h cg_print.h utils.h sym_ids.h
cg_dfn.o: cg_dfn.c $(INCDIR)/libiberty.h $(INCDIR)/ansidecl.h \
  gprof.h $(BFDDIR)/sysdep.h ../bfd/config.h $(INCDIR)/fopen-same.h \
  $(INCDIR)/filenames.h gconfig.h $(INCDIR)/bin-bugs.h \
  cg_arcs.h symtab.h ../bfd/bfd.h source.h search_list.h \
  cg_dfn.h utils.h
cg_print.o: cg_print.c $(INCDIR)/libiberty.h $(INCDIR)/ansidecl.h \
  cg_arcs.h gprof.h $(BFDDIR)/sysdep.h ../bfd/config.h \
  $(INCDIR)/fopen-same.h $(INCDIR)/filenames.h gconfig.h \
  $(INCDIR)/bin-bugs.h symtab.h ../bfd/bfd.h source.h \
  search_list.h cg_print.h hist.h utils.h
corefile.o: corefile.c $(INCDIR)/libiberty.h $(INCDIR)/ansidecl.h \
  gprof.h $(BFDDIR)/sysdep.h ../bfd/config.h $(INCDIR)/fopen-same.h \
  $(INCDIR)/filenames.h gconfig.h $(INCDIR)/bin-bugs.h \
  corefile.h ../bfd/bfd.h symtab.h source.h search_list.h
gmon_io.o: gmon_io.c cg_arcs.h gprof.h $(INCDIR)/ansidecl.h \
  $(BFDDIR)/sysdep.h ../bfd/config.h $(INCDIR)/fopen-same.h \
  $(INCDIR)/filenames.h gconfig.h $(INCDIR)/bin-bugs.h \
  symtab.h ../bfd/bfd.h source.h search_list.h basic_blocks.h \
  corefile.h call_graph.h gmon_io.h gmon.h gmon_out.h \
  hertz.h hist.h $(INCDIR)/libiberty.h
gprof.o: gprof.c $(INCDIR)/getopt.h $(INCDIR)/libiberty.h \
  $(INCDIR)/ansidecl.h gprof.h $(BFDDIR)/sysdep.h ../bfd/config.h \
  $(INCDIR)/fopen-same.h $(INCDIR)/filenames.h gconfig.h \
  $(INCDIR)/bin-bugs.h basic_blocks.h source.h search_list.h \
  symtab.h ../bfd/bfd.h call_graph.h cg_arcs.h cg_print.h \
  corefile.h gmon_io.h gmon.h hertz.h hist.h sym_ids.h \
  $(INCDIR)/demangle.h
hertz.o: hertz.c hertz.h gprof.h $(INCDIR)/ansidecl.h \
  $(BFDDIR)/sysdep.h ../bfd/config.h $(INCDIR)/fopen-same.h \
  $(INCDIR)/filenames.h gconfig.h $(INCDIR)/bin-bugs.h
hist.o: hist.c $(INCDIR)/libiberty.h $(INCDIR)/ansidecl.h \
  gprof.h $(BFDDIR)/sysdep.h ../bfd/config.h $(INCDIR)/fopen-same.h \
  $(INCDIR)/filenames.h gconfig.h $(INCDIR)/bin-bugs.h \
  corefile.h ../bfd/bfd.h gmon_io.h gmon.h gmon_out.h \
  hist.h symtab.h source.h search_list.h sym_ids.h utils.h
source.o: source.c gprof.h $(INCDIR)/ansidecl.h $(BFDDIR)/sysdep.h \
  ../bfd/config.h $(INCDIR)/fopen-same.h $(INCDIR)/filenames.h \
  gconfig.h $(INCDIR)/bin-bugs.h $(INCDIR)/libiberty.h \
  search_list.h source.h
search_list.o: search_list.c $(INCDIR)/libiberty.h \
  $(INCDIR)/ansidecl.h gprof.h $(BFDDIR)/sysdep.h ../bfd/config.h \
  $(INCDIR)/fopen-same.h $(INCDIR)/filenames.h gconfig.h \
  $(INCDIR)/bin-bugs.h search_list.h
symtab.o: symtab.c gprof.h $(INCDIR)/ansidecl.h $(BFDDIR)/sysdep.h \
  ../bfd/config.h $(INCDIR)/fopen-same.h $(INCDIR)/filenames.h \
  gconfig.h $(INCDIR)/bin-bugs.h cg_arcs.h symtab.h ../bfd/bfd.h \
  source.h search_list.h corefile.h
sym_ids.o: sym_ids.c $(INCDIR)/libiberty.h $(INCDIR)/ansidecl.h \
  cg_arcs.h gprof.h $(BFDDIR)/sysdep.h ../bfd/config.h \
  $(INCDIR)/fopen-same.h $(INCDIR)/filenames.h gconfig.h \
  $(INCDIR)/bin-bugs.h symtab.h ../bfd/bfd.h source.h \
  search_list.h sym_ids.h
utils.o: utils.c gprof.h $(BFDDIR)/sysdep.h ../bfd/config.h \
  $(INCDIR)/fopen-same.h $(INCDIR)/filenames.h gconfig.h \
  $(INCDIR)/bin-bugs.h cg_arcs.h symtab.h ../bfd/bfd.h \
  source.h search_list.h
i386.o: i386.c gprof.h $(INCDIR)/ansidecl.h $(BFDDIR)/sysdep.h \
  ../bfd/config.h $(INCDIR)/fopen-same.h $(INCDIR)/filenames.h \
  gconfig.h $(INCDIR)/bin-bugs.h cg_arcs.h symtab.h ../bfd/bfd.h \
  source.h search_list.h corefile.h hist.h
alpha.o: alpha.c gprof.h $(INCDIR)/ansidecl.h $(BFDDIR)/sysdep.h \
  ../bfd/config.h $(INCDIR)/fopen-same.h $(INCDIR)/filenames.h \
  gconfig.h $(INCDIR)/bin-bugs.h cg_arcs.h symtab.h ../bfd/bfd.h \
  source.h search_list.h corefile.h hist.h
vax.o: vax.c gprof.h $(INCDIR)/ansidecl.h $(BFDDIR)/sysdep.h \
  ../bfd/config.h $(INCDIR)/fopen-same.h $(INCDIR)/filenames.h \
  gconfig.h $(INCDIR)/bin-bugs.h cg_arcs.h symtab.h ../bfd/bfd.h \
  source.h search_list.h corefile.h hist.h
tahoe.o: tahoe.c gprof.h $(INCDIR)/ansidecl.h $(BFDDIR)/sysdep.h \
  ../bfd/config.h $(INCDIR)/fopen-same.h $(INCDIR)/filenames.h \
  gconfig.h $(INCDIR)/bin-bugs.h cg_arcs.h symtab.h ../bfd/bfd.h \
  source.h search_list.h corefile.h hist.h
sparc.o: sparc.c gprof.h $(INCDIR)/ansidecl.h $(BFDDIR)/sysdep.h \
  ../bfd/config.h $(INCDIR)/fopen-same.h $(INCDIR)/filenames.h \
  gconfig.h $(INCDIR)/bin-bugs.h cg_arcs.h symtab.h ../bfd/bfd.h \
  source.h search_list.h corefile.h hist.h
flat_bl.o: flat_bl.c
bsd_callg_bl.o: bsd_callg_bl.c
fsf_callg_bl.o: fsf_callg_bl.c
# IF YOU PUT ANYTHING HERE IT WILL GO AWAY

# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT: