changelog

来自「基于4个mips核的noc设计」· 代码 · 共 2,002 行 · 第 1/5 页

TXT
2,002
字号
        * gas/mips/elf_e_flags.s: Add padding to the end of the        file so that objdump output will be consistent.        * gas/mips/elf_e_flags1.d, gas/mips/elf_e_flags2.d,        gas/mips/elf_e_flags3.d, gas/mips/elf_e_flags4.d: Expect        "..." at end of objdump output because of zero bytes at end        of section.        * gas/mips/elf_e_flags.c: Add note to comment about        what's changing in elf_e_flags.s.        * gas/mips/la.s: Add padding to the end of the file so that        objdump output will be consistent.        * gas/mips/la-svr4pic.d, gas/mips/la-xgot.d: Expect "..." at        end of objdump output because of zero bytes at end of        section.        * gas/mips/sync.s: Add padding to the end of the file so that        objdump output will be consistent.        * gas/mips/sync.d: Expect "..." at end of objdump output        because of zero bytes at end of section.        * gas/mips/empic.d: Pad sections out to 16 bytes, to avoid        alignment issues so tests are useful on multiple targets.        * gas/mips/empic.s: Likewise.        * gas/mips/mips16-e.d: Likewise.        * gas/mips/mips16-e.s: Likewise.        * gas/mips/mips16-f.d: Likewise.        * gas/mips/mips16-f.s: Likewise.        * gas/mips/mips32.d: Expect disassembly of madd and maddu        to use their correct names.  Add tests for break and sdbbp.        * gas/mips/mips32.s: Likewise.        * gas/mips/mips64.s: Add test for assembly of MIPS64        extensions.        * gas/mips/mips64.d: Likewise.        * gas/mips/mips.exp: Test using the new "mips64" test.2000-12-01  Chris Demetriou  <cgd@sibyte.com>        * gas/mips/mips16.d: Expect mips16 nops to be used for padding        when mips16 code generation is enabled.	* gas/mips/empic.d: Adjust for the fact that the difference	between two symbols in the same section are not expected to	generate a reloc.	* gas/mips/empic.s: Likewise.  Also, correct typo in comment	about expected relocs.	        * gas/mips/mips32.s, gas/mips/mips32.d: New files for MIPS32        instruction assembly test.        * gas/mips/mips.exp: Add the test mentioned above.2000-11-30  Diego Novillo  <dnovillo@redhat.com>	* intel.s, intel.d: New test for @GOT references.2000-11-28  Hans-Peter Nilsson  <hp@bitrange.com>	* gas/sh/err.exp: New, framework for error-testing.	* gas/sh/err-1.s: New test.2000-11-26  Stephane Carrez  <Stephane.Carrez@worldnet.fr>	* gas/m68hc11/opers12.s: New test for movw operands.	* gas/m68hc11/opers12.d: Likewise.2000-11-24  Nick Clifton  <nickc@redhat.com>	* arm.exp: Run tests for xscale as well as arm.	Run xscale tests.	* xscale.s: New file: XScale instruction tests.	* xscale.d: New file: Expected XScale instruction results.2000-11-20  H.J. Lu  <hjl@gnu.org>	* gas/i386/intel.d: Add 3 "nop"s for the a.out assembler.	* gas/i386/intel.s: Likewise.2000-11-16  H.J. Lu  <hjl@gnu.org>	* gas/symver/symver0.d: Add 64bit support.	* gas/symver/symver1.d: Likewise.2000-11-16  H.J. Lu  <hjl@gnu.org>	* gas/symver/symver.exp: Don't run symver4 nor symver5.2000-11-13  H.J. Lu  <hjl@gnu.org>	* gas/symver/symver.exp: New for symver test.	* gas/symver/symver0.d: Likewise.	* gas/symver/symver0.s: Likewise.	* gas/symver/symver1.d: Likewise.	* gas/symver/symver1.s: Likewise.	* gas/symver/symver2.l: Likewise.	* gas/symver/symver2.s: Likewise.	* gas/symver/symver3.l: Likewise.	* gas/symver/symver3.s: Likewise.	* gas/symver/symver4.l: Likewise.	* gas/symver/symver4.s: Likewise.	* gas/symver/symver5.l: Likewise.	* gas/symver/symver5.s: Likewise.	* gas/symver/symver6.l: Likewise.	* gas/symver/symver6.s: Likewise.2000-11-11  Hans-Peter Nilsson  <hp@bitrange.com>	* gas/macros/macros.exp: Mark strings test xfail for sh.2000-10-24  Diego Novillo  <dnovillo@cygnus.com>	* intel.s, intel.d: Add new tests for intel syntax.2000-10-19  Alan Modra  <alan@linuxcare.com.au>	* gas/elf/section0.s: Ensure section sizes are multiples of 16.	* gas/elf/section1.s: Likewise.	* gas/elf/section[01].d: Change to suit.2000-10-18  H.J. Lu <hjl@gnu.org>	* gas/i386/intel.d: Fix the support for 64bit BFD in the last	change.2000-10-15  Diego Novillo  <dnovillo@cygnus.com>	* intel.s, intel.d: Add new tests for naked registers using intel	syntax.2000-09-29  Hans-Peter Nilsson  <hp@axis.com>	* gas/cris/regprefix-err-1.s, gas/cris/rd-regprefix-1.s,	gas/cris/rd-regprefix-1.d, gas/cris/rd-regprefix-1b.d,	gas/cris/us-err-1.s, gas/cris/us-err-2.s, gas/cris/us-err-3.s: New.	* gas/cris/cris.exp: Loop run_dump_test over files matching rd-*.d.2000-09-28  Alan Modra  <alan@linuxcare.com.au>	* gas/hppa/parse/parse.exp: Replace "hppa*w-*-*" with "hppa*64*-*-*"	* gas/hppa/reloc/reloc.exp: Likewise.	* gas/hppa/unsorted/unsorted.exp: Likewise.	* gas/hppa/reloc/reduce.s: Modify .PARAM so we need an arg reloc.2000-09-22  Jim Wilson  <wilson@cygnus.com>	* gas/ia64/opc-f.pl: Add missing fcmp and fpcmp tests.	* gas/ia64/opc-f.s, gas/ia64/opc-f.d: Regenerate.	* gas/ia64/dv-raw-err.s: Add new testcases for PR%, 16 - 62.	* gas/ia64/dv-waw-err.s: Likewise.	* gas/ia64/dv-imply.d: Regenerate.	* gas/ia64/dv-mutex.d, gas/ia64/dv-raw-err.l, gas/ia64/dv-safe.d,	gas/ia64/dv-srlz.d, gas/ia64/dv-war-err.l, gas/ia64/dv-waw-err.l,	gas/ia64/opc-f.d, gas/ia64/opc-i.d, gas/ia64/opc-m.d: Likewise.2000-09-14  Timothy Wall  <twall@cygnus.com>	* gas/ia64/dv-waw-err.[sl]: Additional tests for parallel	comparisons which should and should not produce DVs.2000-09-05  Alan Modra  <alan@linuxcare.com.au>	* gas/vtable/vtable.exp: Re-enable for hppa-elf.2000-08-29  Timothy Wall  <twall@cygnus.com>        * gas/ia64/dv-mutex.s: Add stop to avoid DV error on cmp.eq.        * gas/ia64/dv-mutex.d: Update regexp pattern.        * gas/ia64/dv-entry-err.s: Add stop to avoid DV error on cmp.eq.        * gas/ia64/dv-imply.s: Add stops to avoid DV errors on cmp.REL.        Test still fails due to insn opcode pattern changes.	2000-08-21  H.J. Lu <hjl@gnu.org>	* gas/all/cofftag.d: Support the strict COFF.2000-08-16  Jim Wilson  <wilson@cygnus.com>	* gas/ia64/dv-raw-err.s: Add new tests for addl and postinc.	* gas/ia64/dv-raw-err.l: Likewise.	* gas/ia64/dv-waw-err.l: Update sed pattern.	* gas/ia64/opc-f.pl: Delete fpsub, and fpadd comment.	* gas/ia64/opc-f.s, gas/ia64/opc-f.d: Regenerate.2000-08-16  Nick Clifton  <nickc@redhat.com>	* gas/arm/inst.s: Add tests for edge cases of shift based        addressing modes.	* gas/arm/inst.d: Add expected results for new tests.2000-07-20  Hans-Peter Nilsson  <hp@axis.com>	* gas/all/gas.exp: Don't run floating-point tests on CRIS.	* gas/ieee-fp/x930509a.exp: Ditto.	* gas/macros/macros.exp: Mark strings test xfail for CRIS.	* gas/cris/*: New tests for CRIS.2000-07-19  Alan Modra  <alan@linuxcare.com.au>	* gas/macros/macros.exp (test1): Run it for hppa*-*-linux*.	(semi): Likewise.	(strings): Don't run for hppa, except for hppa*-*-linux*.	* gas/hppa/parse/linesepbug.s: Ensure we have whitespace before	pseudos.2000-07-18  Scott Bambrough  <scottb@netwinder.org>        * gas/arm/inst.d: Fix expected results to match current assembler        output.  Patch from Justin Seger <justin.m.seger@intel.com>.2000-07-10  Alan Modra  <alan@linuxcare.com.au>	* gas/vtable/vtable.exp: Disable test for hppa.	* gas/hppa/reloc/reloc.exp (do_relocation_reduction_tests): Don't	run test for any elf target.	(applybug): Don't run test for linux.	* gas/hppa/unsorted/unsorted.exp (do_common_text): Likewise.	* gas/hppa/parse/parse.exp (linesepbug): Remove xfail	(labelbug): xfail for hppa-linux.	* gas/hppa/basic/{coprmem.s, fmemLRbug.s}: Add colons to labels.	* gas/hppa/parse/{callinfobug.s, regpopbug.s}: Likewise.	* gas/hppa/reloc/{applybug.s, funcrelocbug.s, longcall.s,	r_no_reloc.s, reduce3.s}: Likewise.	* gas/hppa/unsorted/common.s: Likewise.2000-07-05  Nick Clifton  <nickc@cygnus.com>	* gas/d30v/inst.d: Fix expected results to match current assembler	output.	* gas/d30v/bittest.l: Fix expected warning messages to match	current assembler output.2000-06-29  Kazu Hirata  <kazu@hxi.com>	* gas/h8300/h8300.exp (do_h8300s_mac): Change the registers used	in ldmac and stmac.	* gas/h8300/macs.s: Likewise.2000-06-27  Nick Clifton  <nickc@cygnus.com>	* gas/d30v/bittest.l: Edit to match new warning messages produced	by assembler.2000-06-19  Timothy Wall  <twall@cygnus.com>	* gas/macros/macros.exp: Avoid tests which are not useful on tic54x.	* gas/all/gas.exp: Make adjustments for tic54x target.	* gas/ieee-fp/x930509a.exp: Ditto.	* gas/tic54x/*: New tests for tic54x.  NOTE: load page has been	moved into the LMA and is not printed separately by objdump any	longer.  This still needs to be tested.	2000-06-18  Stephane Carrez  <stcarrez@worldnet.fr>	* gas/m68k/all.exp: Don't execute tests if the target is m68hc11&12.	* gas/m68hc11/all.exp: Specific tests for m68hc11.	* gas/m68hc11/all_insns.[ds]: Check m68hc11 instructions.	* gas/m68hc11/insns[ds]: Another test.	* gas/m68hc11/lbranch.[ds]: Check branch optimization (gas relax).	* gas/m68hc11/opers12.[ds]: New files, check m68hc12 operands.2000-06-17  Alan Modra  <alan@linuxcare.com.au>	* gas/macros/strings.s: Don't start directives in first column	(for LABELS_WITHOUT_COLONS targets).2000-06-14  H.J. Lu <hjl@gnu.org>	* gas/macros/strings.d: Support a.out and coff.2000-06-14  Nick Clifton  <nickc@cygnus.com>	* gas/arm/arm6.s: Remove 'mrs r9, cpsr_all' since the cpsr_all	flag is no longer legal syntax.2000-06-09  Nick Clifton  <nickc@cygnus.com>	* gas/macros/macros.exp: Run new test: strings.	* gas/macros/strings.s: New test: String expansion inside	macros.	* gas/macros/strings.d: New test results.	2000-06-04  Alan Modra  <alan@linuxcare.com.au>	* gas/i386/prefix.s: Modify so we have at least one x86 test that	checks the line separator.Sun May 21 10:08:08 2000  Hans-Peter Nilsson  <hp@axis.com>	* gas/elf/elf.exp: Exclude *-*-linux*coff* as non-elf.2000-05-15  Nick Clifton  <nickc@cygnus.com>	* gas/arm/arch4t.s: Add tests of new fields to msr instruction.2000-05-11  Ulf Carlsson  <ulfc@engr.sgi.com>	* gas/mips/mips.exp: Include *-*-linux* in svr4pic.	* gas/mips/jal-svr4pic.{s,d} gas/mips/jal-xgot.d: Add a jal to a	weak symbol.2000-05-08  Alan Modra  <alan@linuxcare.com.au>	* gas/mri/float.d: Fix for srec length change.2000-05-02  Alan Modra  <alan@linuxcare.com.au>	* gas/hppa/unsorted/unsorted.exp: Duplicate hppa*-*-*elf*	behaviour for hppa*-*-linux* throughout file.	* gas/hppa/reloc/reloc.exp: Ditto.	(reduce2.s): Disable test for elf targets.	* gas/hppa/parse/parse.exp (ssbug.s): setup_xfail hppa*-*-linux*.	* gas/elf/section0.s: Don't start pseudos on first column so	targets that define LABELS_WITHOUT_COLONS work.	* gas/elf/section1.s: Ditto.	* gas/vtable/inherit0.s: Ditto.	* gas/vtable/inherit1.s: Ditto.	* gas/vtable/entry0.s: Ditto.	* gas/vtable/entry1.s: Ditto.2000-05-01  Nick Clifton  <nickc@cygnus.com>	* gasp/macro.out: Fix label numbers to remove leading zeroes. 	* gasp/mdouble.out: Fix label numbers to remove leading zeroes. 2000-04-25  Alan Modra  <alan@linuxcare.com.au>	* gas/i386/general.l: Allow for DISP32 pe relocs.	* gas/i386/jump.d: Similarly.Mon Apr 24 16:35:08 2000  Jim Wilson  <wilson@cygnus.com>	* gas/ia64/opc-i.d: Change pmin2.u to pmin2.  Change pmax2.u to pmax2.	Change MLI to MLX.  Switch operands for output matching tbit.z.orcm,	tbit.z.andcm, tbit.nz.orcm, tbit.nz.andcm, tnat.z.orcm, tnat.z.andcm,	tnat.nz.orcm, tnat.nz.andcm inputs.	* gas/ia64/opc-i.pl: Insert padding nops before last dep.	* gas/ia64/opc-i.s: Regenerate.		* gas/ia64/opc-i.s: Regenerate.	* gas/ia64/opc-f.pl: Add explicit stop at end.	2000-04-22  Timothy Wall  <twall@cygnus.com>	* gas/ia64/opc-f.d: Disassemble zeroes to verify break.f.	* gas/ia64/opc-f.s: Add an explicit stop to make IAS output match.Fri Apr 21 13:20:53 2000  Richard Henderson  <rth@cygnus.com>			  David Mosberger  <davidm@hpl.hp.com>			  Timothy Wall <twall@cygnus.com>			  Jim Wilson  <wilson@cygnus.com>	* gas/vtable/vtable.exp: Disable for ia64.	* gas/ia64: New testsuite directory.	2000-04-03  Alan Modra  <alan@linuxcare.com.au>	* gas/i386/general.s: Check 16-bit immediates, and move call/jump	checks to start.	* gas/i386/general.l: Likewise.2000-04-01  Alexandre Oliva  <aoliva@cygnus.com>	* gas/mn10300/am33_5.s: Check that negative SP offsets are encoded	with 32 bits, not with the unsigned shorter opcodes.	* gas/mn10300/basic.exp: Likewise.2000-03-31  Alexandre Oliva  <aoliva@cygnus.com>	* lib/gas-defs.exp (regexp_diff): Don't break on the first	difference, list them all.2000-03-29  Nick Clifton <nickc@cygnus.com	* gas/arm/thumb.s: Add test of bal instruction.2000-03-27  Alan Modra  <alan@linuxcare.com.au>	* gas/ieee-fp/x930509a.exp (dotest): Fix test for	LISTING_WORD_SIZE==1.	* gas/all/gas.exp (do_930509a): Same here.	* gas/all/cond.d: And here.2000-03-16  Nick Clifton  <nickc@cygnus.com>	* gas/arm/arm.exp: Run branch.s test.	Run tests if target is strongarm.	* gas/arm/branch.s: New test.  Make sure that assembler can handle	same-section branch relocations properly.	* gas/arm/branch.d: New file.  Expected output from assembling

⌨️ 快捷键说明

复制代码Ctrl + C
搜索代码Ctrl + F
全屏模式F11
增大字号Ctrl + =
减小字号Ctrl + -
显示快捷键?