c-h8500.texi
来自「基于4个mips核的noc设计」· TEXI 代码 · 共 273 行
TEXI
273 行
@c Copyright (C) 1991, 1992, 1993, 1994, 1995 Free Software Foundation, Inc.@c This is part of the GAS manual.@c For copying conditions, see the file as.texinfo.@page@node H8/500-Dependent@chapter H8/500 Dependent Features@cindex H8/500 support@menu* H8/500 Options:: Options* H8/500 Syntax:: Syntax* H8/500 Floating Point:: Floating Point* H8/500 Directives:: H8/500 Machine Directives* H8/500 Opcodes:: Opcodes@end menu@node H8/500 Options@section Options@cindex H8/500 options (none)@cindex options, H8/500 (none)@code{@value{AS}} has no additional command-line options for the HitachiH8/500 family.@node H8/500 Syntax@section Syntax@menu* H8/500-Chars:: Special Characters* H8/500-Regs:: Register Names* H8/500-Addressing:: Addressing Modes@end menu@node H8/500-Chars@subsection Special Characters@cindex line comment character, H8/500@cindex H8/500 line comment character@samp{!} is the line comment character.@cindex line separator, H8/500@cindex statement separator, H8/500@cindex H8/500 line separator@samp{;} can be used instead of a newline to separate statements.@cindex symbol names, @samp{$} in@cindex @code{$} in symbol namesSince @samp{$} has no special meaning, you may use it in symbol names.@node H8/500-Regs@subsection Register Names@cindex H8/500 registers@cindex registers, H8/500You can use the predefined symbols @samp{r0}, @samp{r1}, @samp{r2},@samp{r3}, @samp{r4}, @samp{r5}, @samp{r6}, and @samp{r7} to refer tothe H8/500 registers.The H8/500 also has these control registers:@table @code@item cpcode pointer@item dpdata pointer@item bpbase pointer@item tpstack top pointer@item epextra pointer@item srstatus register@item ccrcondition code register@end tableAll registers are 16 bits long. To represent 32 bit numbers, use twoadjacent registers; for distant memory addresses, use one of the segmentpointers (@code{cp} for the program counter; @code{dp} for@code{r0}--@code{r3}; @code{ep} for @code{r4} and @code{r5}; and@code{tp} for @code{r6} and @code{r7}.@node H8/500-Addressing@subsection Addressing Modes@cindex addressing modes, H8/500@cindex H8/500 addressing modes@value{AS} understands the following addressing modes for the H8/500:@table @code@item R@var{n}Register direct@item @@R@var{n}Register indirect@item @@(d:8, R@var{n})Register indirect with 8 bit signed displacement@item @@(d:16, R@var{n})Register indirect with 16 bit signed displacement@item @@-R@var{n}Register indirect with pre-decrement@item @@R@var{n}+Register indirect with post-increment@item @@@var{aa}:88 bit absolute address@item @@@var{aa}:1616 bit absolute address@item #@var{xx}:88 bit immediate@item #@var{xx}:1616 bit immediate@end table@node H8/500 Floating Point@section Floating Point@cindex floating point, H8/500 (@sc{ieee})@cindex H8/500 floating point (@sc{ieee})The H8/500 family has no hardware floating point, but the @code{.float}directive generates @sc{ieee} floating-point numbers for compatibilitywith other development tools.@node H8/500 Directives@section H8/500 Machine Directives@cindex H8/500 machine directives (none)@cindex machine directives, H8/500 (none)@cindex @code{word} directive, H8/500@cindex @code{int} directive, H8/500@code{@value{AS}} has no machine-dependent directives for the H8/500.However, on this platform the @samp{.int} and @samp{.word} directivesgenerate 16-bit numbers.@node H8/500 Opcodes@section Opcodes@cindex H8/500 opcode summary@cindex opcode summary, H8/500@cindex mnemonics, H8/500@cindex instruction summary, H8/500For detailed information on the H8/500 machine instruction set, see@cite{H8/500 Series Programming Manual} (Hitachi M21T001).@code{@value{AS}} implements all the standard H8/500 opcodes. No additionalpseudo-instructions are needed on this family.@ifset SMALL@c this table, due to the multi-col faking and hardcoded order, looks silly@c except in smallbook. See comments below "@set SMALL" near top of this file.The following table summarizes H8/500 opcodes and their operands:@c Use @group if it ever works, instead of @page@page@smallexample@i{Legend:}abs8 @r{8-bit absolute address}abs16 @r{16-bit absolute address}abs24 @r{24-bit absolute address}crb @r{@code{ccr}, @code{br}, @code{ep}, @code{dp}, @code{tp}, @code{dp}}disp8 @r{8-bit displacement}ea @r{@code{rn}, @code{@@rn}, @code{@@(d:8, rn)}, @code{@@(d:16, rn)},} @r{@code{@@-rn}, @code{@@rn+}, @code{@@aa:8}, @code{@@aa:16},} @r{@code{#xx:8}, @code{#xx:16}}ea_mem @r{@code{@@rn}, @code{@@(d:8, rn)}, @code{@@(d:16, rn)},} @r{@code{@@-rn}, @code{@@rn+}, @code{@@aa:8}, @code{@@aa:16}}ea_noimm @r{@code{rn}, @code{@@rn}, @code{@@(d:8, rn)}, @code{@@(d:16, rn)},} @r{@code{@@-rn}, @code{@@rn+}, @code{@@aa:8}, @code{@@aa:16}}fp r6imm4 @r{4-bit immediate data}imm8 @r{8-bit immediate data}imm16 @r{16-bit immediate data}pcrel8 @r{8-bit offset from program counter}pcrel16 @r{16-bit offset from program counter}qim @r{@code{-2}, @code{-1}, @code{1}, @code{2}}rd @r{any register}rs @r{a register distinct from rd}rlist @r{comma-separated list of registers in parentheses;} @r{register ranges @code{rd-rs} are allowed}sp @r{stack pointer (@code{r7})}sr @r{status register}sz @r{size; @samp{.b} or @samp{.w}. If omitted, default @samp{.w}}ldc[.b] ea,crb bcc[.w] pcrel16ldc[.w] ea,sr bcc[.b] pcrel8 add[:q] sz qim,ea_noimm bhs[.w] pcrel16add[:g] sz ea,rd bhs[.b] pcrel8 adds sz ea,rd bcs[.w] pcrel16addx sz ea,rd bcs[.b] pcrel8 and sz ea,rd blo[.w] pcrel16andc[.b] imm8,crb blo[.b] pcrel8 andc[.w] imm16,sr bne[.w] pcrel16bpt bne[.b] pcrel8 bra[.w] pcrel16 beq[.w] pcrel16bra[.b] pcrel8 beq[.b] pcrel8 bt[.w] pcrel16 bvc[.w] pcrel16bt[.b] pcrel8 bvc[.b] pcrel8 brn[.w] pcrel16 bvs[.w] pcrel16brn[.b] pcrel8 bvs[.b] pcrel8 bf[.w] pcrel16 bpl[.w] pcrel16bf[.b] pcrel8 bpl[.b] pcrel8 bhi[.w] pcrel16 bmi[.w] pcrel16bhi[.b] pcrel8 bmi[.b] pcrel8 bls[.w] pcrel16 bge[.w] pcrel16bls[.b] pcrel8 bge[.b] pcrel8 @pageblt[.w] pcrel16 mov[:g][.b] imm8,ea_mem blt[.b] pcrel8 mov[:g][.w] imm16,ea_mem bgt[.w] pcrel16 movfpe[.b] ea,rd bgt[.b] pcrel8 movtpe[.b] rs,ea_noimm ble[.w] pcrel16 mulxu sz ea,rd ble[.b] pcrel8 neg sz ea bclr sz imm4,ea_noimm nop bclr sz rs,ea_noimm not sz ea bnot sz imm4,ea_noimm or sz ea,rd bnot sz rs,ea_noimm orc[.b] imm8,crb bset sz imm4,ea_noimm orc[.w] imm16,sr bset sz rs,ea_noimm pjmp abs24 bsr[.b] pcrel8 pjmp @@rd bsr[.w] pcrel16 pjsr abs24 btst sz imm4,ea_noimm pjsr @@rd btst sz rs,ea_noimm prtd imm8 clr sz ea prtd imm16 cmp[:e][.b] imm8,rd prts cmp[:i][.w] imm16,rd rotl sz ea cmp[:g].b imm8,ea_noimm rotr sz ea cmp[:g][.w] imm16,ea_noimm rotxl sz ea Cmp[:g] sz ea,rd rotxr sz ea dadd rs,rd rtd imm8 divxu sz ea,rd rtd imm16 dsub rs,rd rts exts[.b] rd scb/f rs,pcrel8 extu[.b] rd scb/ne rs,pcrel8 jmp @@rd scb/eq rs,pcrel8 jmp @@(imm8,rd) shal sz ea jmp @@(imm16,rd) shar sz ea jmp abs16 shll sz ea jsr @@rd shlr sz ea jsr @@(imm8,rd) sleep jsr @@(imm16,rd) stc[.b] crb,ea_noimm jsr abs16 stc[.w] sr,ea_noimm ldm @@sp+,(rlist) stm (rlist),@@-sp link fp,imm8 sub sz ea,rd link fp,imm16 subs sz ea,rd mov[:e][.b] imm8,rd subx sz ea,rd mov[:i][.w] imm16,rd swap[.b] rd mov[:l][.w] abs8,rd tas[.b] ea mov[:l].b abs8,rd trapa imm4 mov[:s][.w] rs,abs8 trap/vs mov[:s].b rs,abs8 tst sz ea mov[:f][.w] @@(disp8,fp),rd unlk fp mov[:f][.w] rs,@@(disp8,fp) xch[.w] rs,rd mov[:f].b @@(disp8,fp),rd xor sz ea,rd mov[:f].b rs,@@(disp8,fp) xorc.b imm8,crbmov[:g] sz rs,ea_mem xorc.w imm16,srmov[:g] sz ea,rd @end smallexample@end ifset
⌨️ 快捷键说明
复制代码Ctrl + C
搜索代码Ctrl + F
全屏模式F11
增大字号Ctrl + =
减小字号Ctrl + -
显示快捷键?