makefile.am

来自「基于4个mips核的noc设计」· AM 代码 · 共 1,056 行 · 第 1/3 页

eriscix.c: $(srcdir)/emulparams/riscix.sh \
  $(srcdir)/emultempl/generic.em $(srcdir)/scripttempl/aout.sc ${GEN_DEPENDS}
	${GENSCRIPTS} riscix "$(tdir_riscix)"
esa29200.c: $(srcdir)/emulparams/sa29200.sh \
  $(srcdir)/emultempl/generic.em $(srcdir)/scripttempl/sa29200.sc ${GEN_DEPENDS}
	${GENSCRIPTS} sa29200 "$(tdir_sa29200)"
esh.c: $(srcdir)/emulparams/sh.sh \
  $(srcdir)/emultempl/generic.em $(srcdir)/scripttempl/sh.sc ${GEN_DEPENDS}
	${GENSCRIPTS} sh "$(tdir_sh)"
eshelf.c: $(srcdir)/emulparams/shelf.sh \
  $(srcdir)/emultempl/elf32.em $(srcdir)/scripttempl/elf.sc ${GEN_DEPENDS}
	${GENSCRIPTS} shelf "$(tdir_shelf)"
eshelf_linux.c: $(srcdir)/emulparams/shelf_linux.sh \
  $(srcdir)/emultempl/elf32.em $(srcdir)/scripttempl/elf.sc ${GEN_DEPENDS}
	${GENSCRIPTS} shelf_linux "$(tdir_shelf_linux)"
eshlelf_linux.c: $(srcdir)/emulparams/shlelf_linux.sh \
  $(srcdir)/emultempl/elf32.em $(srcdir)/scripttempl/elf.sc ${GEN_DEPENDS}
	${GENSCRIPTS} shlelf_linux "$(tdir_shlelf_linux)"
eshlelf.c: $(srcdir)/emulparams/shlelf.sh \
  $(srcdir)/emultempl/elf32.em $(srcdir)/scripttempl/elf.sc ${GEN_DEPENDS}
	${GENSCRIPTS} shlelf "$(tdir_shlelf)"
eshl.c: $(srcdir)/emulparams/shl.sh \
  $(srcdir)/emultempl/generic.em $(srcdir)/scripttempl/sh.sc ${GEN_DEPENDS}
	${GENSCRIPTS} shl "$(tdir_shl)"
eshpe.c: $(srcdir)/emulparams/shpe.sh \
  $(srcdir)/emultempl/pe.em $(srcdir)/scripttempl/pe.sc ${GEN_DEPENDS}
	${GENSCRIPTS} shpe "$(tdir_shl)"
esparcaout.c: $(srcdir)/emulparams/sparcaout.sh \
  $(srcdir)/emultempl/generic.em $(srcdir)/scripttempl/aout.sc ${GEN_DEPENDS}
	${GENSCRIPTS} sparcaout "$(tdir_sparcaout)"
esparclinux.c: $(srcdir)/emulparams/sparclinux.sh \
  $(srcdir)/emultempl/linux.em $(srcdir)/scripttempl/aout.sc ${GEN_DEPENDS}
	${GENSCRIPTS} sparclinux "$(tdir_sparclinux)"
esparclynx.c: $(srcdir)/emulparams/sparclynx.sh \
  $(srcdir)/emultempl/generic.em $(srcdir)/scripttempl/sparclynx.sc ${GEN_DEPENDS}
	${GENSCRIPTS} sparclynx "$(tdir_sparclynx)"
esparcnbsd.c:	$(srcdir)/emulparams/sparcnbsd.sh \
  $(srcdir)/emultempl/generic.em $(srcdir)/scripttempl/aout.sc ${GEN_DEPENDS}
	${GENSCRIPTS} sparcnbsd "$(tdir_sparcnbsd)"
est2000.c: $(srcdir)/emulparams/st2000.sh \
  $(srcdir)/emultempl/generic.em $(srcdir)/scripttempl/st2000.sc ${GEN_DEPENDS}
	${GENSCRIPTS} st2000 "$(tdir_st2000)"
esun3.c: $(srcdir)/emulparams/sun3.sh \
  $(srcdir)/emultempl/sunos.em $(srcdir)/scripttempl/aout.sc ${GEN_DEPENDS}
	${GENSCRIPTS} sun3 "$(tdir_sun3)"
esun4.c: $(srcdir)/emulparams/sun4.sh \
  $(srcdir)/emultempl/sunos.em $(srcdir)/scripttempl/aout.sc ${GEN_DEPENDS}
	${GENSCRIPTS} sun4 "$(tdir_sun4)"
etic30aout.c: $(srcdir)/emulparams/tic30aout.sh \
  $(srcdir)/emultempl/generic.em $(srcdir)/scripttempl/tic30aout.sc ${GEN_DEPENDS}
	${GENSCRIPTS} tic30aout "$(tdir_tic30aout)"
etic30coff.c: $(srcdir)/emulparams/tic30coff.sh \
  $(srcdir)/emultempl/generic.em $(srcdir)/scripttempl/tic30coff.sc ${GEN_DEPENDS}
	${GENSCRIPTS} tic30coff "$(tdir_tic30coff)"
etic54xcoff.c: $(srcdir)/emulparams/tic54xcoff.sh \
  $(srcdir)/emultempl/ticoff.em $(srcdir)/scripttempl/tic54xcoff.sc ${GEN_DEPENDS}
	${GENSCRIPTS} tic54xcoff "$(tdir_tic54xcoff)"
etic80coff.c: $(srcdir)/emulparams/tic80coff.sh \
  $(srcdir)/emultempl/generic.em $(srcdir)/scripttempl/tic80coff.sc ${GEN_DEPENDS}
	${GENSCRIPTS} tic80coff "$(tdir_tic80coff)"
evanilla.c: $(srcdir)/emulparams/vanilla.sh \
  $(srcdir)/emultempl/vanilla.em $(srcdir)/scripttempl/vanilla.sc ${GEN_DEPENDS}
	${GENSCRIPTS} vanilla "$(tdir_vanilla)"
evax.c: $(srcdir)/emulparams/vax.sh \
  $(srcdir)/emultempl/generic.em $(srcdir)/scripttempl/aout.sc ${GEN_DEPENDS}
	${GENSCRIPTS} vax "$(tdir_vax)"
evsta.c: $(srcdir)/emulparams/vsta.sh \
  $(srcdir)/emultempl/generic.em $(srcdir)/scripttempl/aout.sc ${GEN_DEPENDS}
	${GENSCRIPTS} vsta "$(tdir_vsta)"
ev850.c: $(srcdir)/emulparams/v850.sh \
  $(srcdir)/emultempl/elf32.em $(srcdir)/scripttempl/v850.sc ${GEN_DEPENDS}
	${GENSCRIPTS} v850 "$(tdir_v850)"
ew65.c: $(srcdir)/emulparams/w65.sh \
  $(srcdir)/emultempl/generic.em $(srcdir)/scripttempl/w65.sc ${GEN_DEPENDS}
	${GENSCRIPTS} w65 "$(tdir_w65)"
ez8001.c: $(srcdir)/emulparams/z8001.sh \
  $(srcdir)/emultempl/generic.em $(srcdir)/scripttempl/z8000.sc ${GEN_DEPENDS}
	${GENSCRIPTS} z8001 "$(tdir_z8001)"
ez8002.c: $(srcdir)/emulparams/z8002.sh \
  $(srcdir)/emultempl/generic.em $(srcdir)/scripttempl/z8000.sc ${GEN_DEPENDS}
	${GENSCRIPTS} z8002 "$(tdir_z8002)"

# We need this for automake to use YLWRAP.
EXTRA_ld_new_SOURCES = deffilep.y

ld_new_SOURCES = ldgram.y ldlex.l lexsup.c ldlang.c mri.c ldctor.c ldmain.c \
	ldwrite.c ldexp.c ldemul.c ldver.c ldmisc.c ldfile.c ldcref.c
ld_new_DEPENDENCIES = $(EMULATION_OFILES) $(EMUL_EXTRA_OFILES) $(BFDLIB) $(LIBIBERTY) $(INTLDEPS)
ld_new_LDADD = $(EMULATION_OFILES) $(EMUL_EXTRA_OFILES) $(BFDLIB) $(LIBIBERTY) $(INTLLIBS)

# The generated emulation files mostly have the same dependencies.
$(EMULATION_OFILES): ../bfd/bfd.h sysdep.h config.h $(INCDIR)/bfdlink.h \
  ld.h ldmain.h ldemul.h ldfile.h ldmisc.h ldexp.h ldlang.h \
  ldctor.h ldexp.h ldlang.h ldgram.h

# This is the real libbfd.a created by libtool.
TESTBFDLIB = @TESTBFDLIB@

check-DEJAGNU: site.exp
	srcroot=`cd $(srcdir) && pwd`; export srcroot; \
	r=`pwd`; export r; \
	LC_COLLATE=; LC_ALL=; LANG=; export LC_COLLATE LC_ALL LANG; \
	EXPECT=$(EXPECT); export EXPECT; \
	if [ -f $(top_builddir)/../expect/expect ]; then \
	  TCL_LIBRARY=`cd $(top_srcdir)/../tcl/library && pwd`; \
	  export TCL_LIBRARY; \
	fi; \
	runtest=$(RUNTEST); \
	if $(SHELL) -c "$$runtest --version" > /dev/null 2>&1; then \
	  $$runtest --tool $(DEJATOOL) --srcdir $${srcroot}/testsuite \
		CC="$(CC_FOR_TARGET)" CFLAGS="$(CFLAGS)" \
		CXX="$(CXX_FOR_TARGET)" CXXFLAGS="$(CXXFLAGS)" \
		CC_FOR_HOST="$(CC)" CFLAGS_FOR_HOST="$(CFLAGS)" \
		OFILES="$(OFILES)" BFDLIB="$(TESTBFDLIB)" \
		LIBIBERTY="$(LIBIBERTY) $(INTLLIBS)" LIBS="$(LIBS)" \
		$(RUNTESTFLAGS); \
	else echo "WARNING: could not find \`runtest'" 1>&2; :;\
	fi

# Rules for testing by relinking ld itself.
# A similar test is in the testsuite.  This target is for ease of use
# when porting ld.

ld-partial.o: ld-new$(EXEEXT)
	./ld-new$(EXEEXT) $(HOSTING_EMU) -o ld-partial.o -r $(OFILES)
ld1$(EXEEXT): ld-partial.o
	./ld-new$(EXEEXT) $(HOSTING_EMU) -o ld1$(EXEEXT) $(HOSTING_CRT0) ld-partial.o $(TESTBFDLIB) $(LIBIBERTY) $(HOSTING_LIBS) $(LIBS)

ld1-full$(EXEEXT): ld-new
	./ld-new$(EXEEXT) $(HOSTING_EMU) -o ld1-full$(EXEEXT) $(HOSTING_CRT0) $(OFILES) $(TESTBFDLIB) $(LIBIBERTY) $(HOSTING_LIBS) $(LIBS)

ld2$(EXEEXT): ld1$(EXEEXT)
	./ld1$(EXEEXT) $(HOSTING_EMU) -o ld2$(EXEEXT) $(HOSTING_CRT0) $(OFILES) $(TESTBFDLIB) $(LIBIBERTY) $(HOSTING_LIBS) $(LIBS)

ld3$(EXEEXT): ld2$(EXEEXT)
	./ld2$(EXEEXT) $(HOSTING_EMU) -o ld3$(EXEEXT) $(HOSTING_CRT0) $(OFILES) $(TESTBFDLIB) $(LIBIBERTY) $(HOSTING_LIBS) $(LIBS)

bootstrap: ld3$(EXEEXT)
	cmp ld2$(EXEEXT) ld3$(EXEEXT)

.PHONY: bootstrap

# A test program for C++ constructors and destructors.
# This test is now in the testsuite.
#
#cdtest: cdtest-main.o cdtest-bar.o cdtest-foo.o ld.new
#	./ld.new $(HOSTING_EMU) -o cdtest $(HOSTING_CRT0) \
#	  cdtest-main.o cdtest-bar.o cdtest-foo.o $(HOSTING_LIBS)
#
#cdtest.out: cdtest
#	./cdtest > cdtest.tmp
#	mv cdtest.tmp cdtest.out
#
#cdtest-ur.o: cdtest-main.o cdtest-bar.o cdtest-foo.o ld.new
#	./ld.new $(HOSTING_EMU) -o cdtest-ur.o -Ur cdtest-main.o \
#	  cdtest-bar.o cdtest-foo.o
#
#cdtest-ur: cdtest-ur.o
#	./ld.new $(HOSTING_EMU) -o cdtest-ur $(HOSTING_CRT0) cdtest-ur.o \
#	  $(HOSTING_LIBS)
#
#cdtest-ur.out: cdtest-ur
#	./cdtest-ur > cdtest-ur.tmp
#	mv cdtest-ur.tmp cdtest-ur.out
#
#check-cdtest: cdtest.out cdtest-ur.out $(srcdir)/cdtest.exp
#	diff $(srcdir)/cdtest.exp cdtest.out
#	diff $(srcdir)/cdtest.exp cdtest-ur.out
#
#.PHONY: check-cdtest

# END OF CHECK TARGETS

# DOCUMENTATION TARGETS
# Manual configuration file; not usually attached to normal configuration,
# because almost all configs use "gen" version of manual.
#  Set DOCVER above to change.
configdoc.texi:	${DOCVER}-doc.texi
	ln -s ${srcdir}/${DOCVER}-doc.texi ./configdoc.texi >/dev/null 2>&1 \
	  || ln ${srcdir}/${DOCVER}-doc.texi ./configdoc.texi >/dev/null 2>&1 \
	  || cp ${srcdir}/${DOCVER}-doc.texi ./configdoc.texi

ldver.texi: Makefile
	rm -f $@
	echo '@set VERSION $(VERSION)' > $@

ld.info: $(srcdir)/ld.texinfo configdoc.texi ldver.texi
	@rm -f $@ $@-[0-9] $@-[0-9][0-9]
	$(MAKEINFO) -I $(srcdir) -I $(BFDDIR)/doc $(srcdir)/ld.texinfo

ld.dvi: $(srcdir)/ld.texinfo configdoc.texi ldver.texi
	TEXINPUTS=$(top_srcdir)/../texinfo:$$TEXINPUTS \
	  MAKEINFO="$(MAKEINFO) -I $(srcdir) -I $(BFDDIR)/doc" $(TEXI2DVI) -I $(BFDDIR)/doc $(srcdir)/ld.texinfo

MAINTAINERCLEANFILES = ldver.texi

# We want to reconfigure if configure.host or configure.tgt changes.
config.status: $(srcdir)/configure $(srcdir)/configure.host $(srcdir)/configure.tgt
	$(SHELL) ./config.status --recheck

MOSTLYCLEANFILES = $(STAGESTUFF) ld1$(EXEEXT) ld2$(EXEEXT) ld3$(EXEEXT) \
	ldemul-list.h crtbegin.o crtend.o ld.log ld.sum
mostlyclean-local:
	-rm -rf tmpdir
CLEANFILES = dep.sed DEP DEPA DEP1 DEP2

.PHONY: install-exec-local install-data-local

install-exec-local: ld-new$(EXEEXT)
	$(mkinstalldirs) $(bindir) $(tooldir)/bin
	@list='$(noinst_PROGRAMS)'; for p in $$list; do \
	  if test -f $$p; then \
	    echo " $(LIBTOOL)  --mode=install $(INSTALL_PROGRAM) $$p $(bindir)/`echo $$p|sed -e 's/$(EXEEXT)$$//' -e 's/-new//'|sed '$(transform)'|sed 's/$$/$(EXEEXT)/'`"; \
	    $(LIBTOOL)  --mode=install $(INSTALL_PROGRAM) $$p $(bindir)/`echo $$p|sed -e 's/$(EXEEXT)$$//' -e 's/-new//'|sed '$(transform)'|sed 's/$$/$(EXEEXT)/'`; \
	  else :; fi; \
	done
	n=`echo ld | sed '$(transform)'`; \
	if [ "$(bindir)/$$n$(EXEEXT)" != "$(tooldir)/bin/ld$(EXEEXT)" ]; then \
	  rm -f $(tooldir)/bin/ld$(EXEEXT); \
	  ln $(bindir)/$$n$(EXEEXT) $(tooldir)/bin/ld$(EXEEXT) >/dev/null 2>/dev/null \
	  || $(LIBTOOL) --mode=install $(INSTALL_PROGRAM) ld-new$(EXEEXT) $(tooldir)/bin/ld$(EXEEXT); \
	fi

install-data-local:
	$(mkinstalldirs) $(scriptdir)/ldscripts
	for f in ldscripts/*; do \
	  $(INSTALL_DATA) $$f $(scriptdir)/$$f ; \
	done

# Stuff that should be included in a distribution.  The diststuff
# target is run by the taz target in ../Makefile.in.
LDDISTSTUFF = ldgram.c ldgram.h ldlex.c
diststuff: $(LDDISTSTUFF) info

DISTCLEANFILES = tdirs site.exp site.bak stringify.sed
distclean-local:
	rm -rf ldscripts

# Targets to rebuild dependencies in this Makefile.
# Have to get rid of DEP1 here so that "$?" later includes all of $(CFILES).
DEP: dep.sed $(CFILES) $(HFILES) $(GENERATED_CFILES) $(GENERATED_HFILES) config.h
	rm -f DEP1
	$(MAKE) MKDEP="$(MKDEP)" DEP1
	sed -f dep.sed < DEP1 > DEPA
	echo '# IF YOU PUT ANYTHING HERE IT WILL GO AWAY' >> DEPA
	if grep ' /' DEPA > /dev/null 2> /dev/null; then \
	  echo 'make DEP failed!'; exit 1; \
	else \
	  mv -f DEPA $@; \
	fi

DEP1: $(CFILES) $(GENERATED_CFILES)
	echo '# DO NOT DELETE THIS LINE -- mkdep uses it.' > DEP2
	echo '# DO NOT PUT ANYTHING AFTER THIS LINE, IT WILL GO AWAY.' >> DEP2
	$(MKDEP) $(INCLUDES) $(CFLAGS) $? >> DEP2
	mv -f DEP2 $@

dep.sed: dep-in.sed config.status
	sed <$(srcdir)/dep-in.sed >dep.sed	\
		-e 's!@INCDIR@!$(INCDIR)!'	\
		-e 's!@SRCDIR@!$(srcdir)!'

dep: DEP
	sed -e '/^..DO NOT DELETE THIS LINE/,$$d' < Makefile > tmp-Makefile
	cat DEP >> tmp-Makefile
	$(srcdir)/../move-if-change tmp-Makefile Makefile

dep-in: DEP
	sed -e '/^..DO NOT DELETE THIS LINE/,$$d' < $(srcdir)/Makefile.in > tmp-Makefile.in
	cat DEP >> tmp-Makefile.in
	$(srcdir)/../move-if-change tmp-Makefile.in $(srcdir)/Makefile.in

dep-am: DEP
	sed -e '/^..DO NOT DELETE THIS LINE/,$$d' < $(srcdir)/Makefile.am > tmp-Makefile.am
	cat DEP >> tmp-Makefile.am
	$(srcdir)/../move-if-change tmp-Makefile.am $(srcdir)/Makefile.am

.PHONY: dep dep-in dep-am

# What appears below is generated by a hacked mkdep using gcc -MM.

# DO NOT DELETE THIS LINE -- mkdep uses it.
# DO NOT PUT ANYTHING AFTER THIS LINE, IT WILL GO AWAY.
ldctor.o: ldctor.c ../bfd/bfd.h $(INCDIR)/ansidecl.h \
  sysdep.h config.h $(INCDIR)/fopen-same.h $(INCDIR)/bfdlink.h \
  ld.h $(INCDIR)/bin-bugs.h ldexp.h ldlang.h ldmisc.h \
  ldgram.h ldmain.h ldctor.h
ldemul.o: ldemul.c ../bfd/bfd.h $(INCDIR)/ansidecl.h \
  sysdep.h config.h $(INCDIR)/fopen-same.h ld.h $(INCDIR)/bin-bugs.h \
  ldmisc.h ldexp.h ldlang.h ldfile.h ldemul.h ldmain.h \
  ldemul-list.h
ldexp.o: ldexp.c ../bfd/bfd.h $(INCDIR)/ansidecl.h \
  sysdep.h config.h $(INCDIR)/fopen-same.h $(INCDIR)/bfdlink.h \
  ld.h $(INCDIR)/bin-bugs.h ldmain.h ldmisc.h ldexp.h \
  ldgram.h ldlang.h
ldfile.o: ldfile.c ../bfd/bfd.h $(INCDIR)/ansidecl.h \
  sysdep.h config.h $(INCDIR)/fopen-same.h $(INCDIR)/bfdlink.h \
  ld.h $(INCDIR)/bin-bugs.h ldmisc.h ldexp.h ldlang.h \
  ldfile.h ldmain.h ldgram.h ldlex.h ldemul.h $(INCDIR)/libiberty.h
ldlang.o: ldlang.c ../bfd/bfd.h $(INCDIR)/ansidecl.h \
  sysdep.h config.h $(INCDIR)/fopen-same.h $(INCDIR)/libiberty.h \
  $(INCDIR)/obstack.h $(INCDIR)/bfdlink.h ld.h $(INCDIR)/bin-bugs.h \
  ldmain.h ldgram.h ldexp.h ldlang.h ldlex.h ldmisc.h \
  ldctor.h ldfile.h ldemul.h $(INCDIR)/fnmatch.h $(INCDIR)/demangle.h
ldmain.o: ldmain.c ../bfd/bfd.h $(INCDIR)/ansidecl.h \
  sysdep.h config.h $(INCDIR)/fopen-same.h $(INCDIR)/libiberty.h \
  $(INCDIR)/progress.h $(INCDIR)/bfdlink.h $(INCDIR)/filenames.h \
  ld.h $(INCDIR)/bin-bugs.h ldmain.h ldmisc.h ldwrite.h \
  ldgram.h ldexp.h ldlang.h ldlex.h ldfile.h ldemul.h \
  ldctor.h
ldmisc.o: ldmisc.c ../bfd/bfd.h $(INCDIR)/ansidecl.h \
  sysdep.h config.h $(INCDIR)/fopen-same.h $(INCDIR)/libiberty.h \
  $(INCDIR)/demangle.h ld.h $(INCDIR)/bin-bugs.h ldmisc.h \
  ldexp.h ldlang.h ldgram.h ldlex.h ldmain.h ldfile.h
ldver.o: ldver.c ../bfd/bfd.h $(INCDIR)/ansidecl.h \
  sysdep.h config.h $(INCDIR)/fopen-same.h ld.h $(INCDIR)/bin-bugs.h \
  ldver.h ldexp.h ldlang.h ldfile.h ldemul.h ldmain.h
ldwrite.o: ldwrite.c ../bfd/bfd.h $(INCDIR)/ansidecl.h \
  sysdep.h config.h $(INCDIR)/fopen-same.h $(INCDIR)/bfdlink.h \
  $(INCDIR)/libiberty.h ld.h $(INCDIR)/bin-bugs.h ldexp.h \
  ldlang.h ldwrite.h ldmisc.h ldgram.h ldmain.h
lexsup.o: lexsup.c ../bfd/bfd.h $(INCDIR)/ansidecl.h \
  sysdep.h config.h $(INCDIR)/fopen-same.h $(INCDIR)/libiberty.h \
  $(INCDIR)/bfdlink.h ld.h $(INCDIR)/bin-bugs.h ldmain.h \
  ldmisc.h ldexp.h ldlang.h ldgram.h ldlex.h ldfile.h \
  ldver.h ldemul.h $(INCDIR)/demangle.h
mri.o: mri.c ../bfd/bfd.h $(INCDIR)/ansidecl.h sysdep.h \
  config.h $(INCDIR)/fopen-same.h ld.h $(INCDIR)/bin-bugs.h \
  ldexp.h ldlang.h ldmisc.h mri.h ldgram.h $(INCDIR)/libiberty.h
ldcref.o: ldcref.c ../bfd/bfd.h $(INCDIR)/ansidecl.h \
  sysdep.h config.h $(INCDIR)/fopen-same.h $(INCDIR)/bfdlink.h \
  $(INCDIR)/libiberty.h ld.h $(INCDIR)/bin-bugs.h ldmain.h \
  ldmisc.h ldexp.h ldlang.h
pe-dll.o: pe-dll.c ../bfd/bfd.h $(INCDIR)/ansidecl.h \
  sysdep.h config.h $(INCDIR)/fopen-same.h $(INCDIR)/bfdlink.h \
  $(INCDIR)/libiberty.h ld.h $(INCDIR)/bin-bugs.h ldexp.h \
  ldlang.h ldwrite.h ldmisc.h ldgram.h ldmain.h ldfile.h \
  ldemul.h $(INCDIR)/coff/internal.h ../bfd/libcoff.h \
  deffile.h pe-dll.h
ldgram.o: ldgram.c ../bfd/bfd.h $(INCDIR)/ansidecl.h \
  sysdep.h config.h $(INCDIR)/fopen-same.h $(INCDIR)/bfdlink.h \
  ld.h $(INCDIR)/bin-bugs.h ldexp.h ldver.h ldlang.h \
  ldfile.h ldemul.h ldmisc.h ldmain.h mri.h ldctor.h \
  ldlex.h
ldlex.o: ldlex.c ../bfd/bfd.h sysdep.h config.h $(INCDIR)/fopen-same.h \
  ld.h $(INCDIR)/bin-bugs.h ldgram.h ldmisc.h ldexp.h \
  ldlang.h ldfile.h ldlex.h ldmain.h $(INCDIR)/libiberty.h
deffilep.o: deffilep.c $(INCDIR)/libiberty.h $(INCDIR)/ansidecl.h \
  ../bfd/bfd.h sysdep.h config.h $(INCDIR)/fopen-same.h \
  ld.h $(INCDIR)/bin-bugs.h ldmisc.h deffile.h
# IF YOU PUT ANYTHING HERE IT WILL GO AWAY