makefile

来自「基于4个mips核的noc设计」· 代码 · 共 1,746 行 · 第 1/5 页

ALL_64_EMULATIONS = \
	eelf64_ia64.o \
	eelf_x86_64.o \
	eelf64_sparc.o \
	eelf64alpha.o \
	eelf64bmip.o \
	eelf64btsmip.o \
	eelf64ltsmip.o \
	eelf64hppa.o


ALL_EMUL_EXTRA_OFILES = \
	deffilep.o \
	pe-dll.o


CFILES = ldctor.c ldemul.c ldexp.c ldfile.c ldlang.c \
	ldmain.c ldmisc.c ldver.c ldwrite.c lexsup.c \
	mri.c ldcref.c pe-dll.c


HFILES = ld.h ldctor.h ldemul.h ldexp.h ldfile.h \
	ldlang.h ldlex.h ldmain.h ldmisc.h ldver.h \
	ldwrite.h mri.h deffile.h pe-dll.h


GENERATED_CFILES = ldgram.c ldlex.c deffilep.c
GENERATED_HFILES = ldgram.h ldemul-list.h deffilep.h

OFILES = ldgram.o ldlex.o lexsup.o ldlang.o mri.o ldctor.o ldmain.o \
	ldwrite.o ldexp.o  ldemul.o ldver.o ldmisc.o \
	ldfile.o ldcref.o ${EMULATION_OFILES} ${EMUL_EXTRA_OFILES}


STAGESTUFF = *.o ldscripts/* e*.c

# At the moment this is just a list of those emulation template files
# that contain internationalised strings.
EMULATION_FILES = emultempl/pe.em emultempl/armcoff.em

POTFILES = $(CFILES) $(HFILES) $(EMULATION_FILES)

# These all start with e so 'make clean' can find them.

GENSCRIPTS = $(SHELL) $(srcdir)/genscripts.sh ${srcdir} ${libdir} ${exec_prefix} i686-pc-linux-gnu mips-mips-elf mips "elf32ebmip" ""
GEN_DEPENDS = $(srcdir)/genscripts.sh stringify.sed

# We need this for automake to use YLWRAP.
EXTRA_ld_new_SOURCES = deffilep.y

ld_new_SOURCES = ldgram.y ldlex.l lexsup.c ldlang.c mri.c ldctor.c ldmain.c \
	ldwrite.c ldexp.c ldemul.c ldver.c ldmisc.c ldfile.c ldcref.c

ld_new_DEPENDENCIES = $(EMULATION_OFILES) $(EMUL_EXTRA_OFILES) $(BFDLIB) $(LIBIBERTY) $(INTLDEPS)
ld_new_LDADD = $(EMULATION_OFILES) $(EMUL_EXTRA_OFILES) $(BFDLIB) $(LIBIBERTY) $(INTLLIBS)

# This is the real libbfd.a created by libtool.
TESTBFDLIB = ../bfd/.libs/libbfd.a

MAINTAINERCLEANFILES = ldver.texi

MOSTLYCLEANFILES = $(STAGESTUFF) ld1$(EXEEXT) ld2$(EXEEXT) ld3$(EXEEXT) \
	ldemul-list.h crtbegin.o crtend.o ld.log ld.sum

CLEANFILES = dep.sed DEP DEPA DEP1 DEP2

# Stuff that should be included in a distribution.  The diststuff
# target is run by the taz target in ../Makefile.in.
LDDISTSTUFF = ldgram.c ldgram.h ldlex.c

DISTCLEANFILES = tdirs site.exp site.bak stringify.sed
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
mkinstalldirs = $(SHELL) $(top_srcdir)/../mkinstalldirs
CONFIG_HEADER = config.h
CONFIG_CLEAN_FILES = 
noinst_PROGRAMS =  ld-new$(EXEEXT)
PROGRAMS =  $(noinst_PROGRAMS)


DEFS = -DHAVE_CONFIG_H -I. -I$(srcdir) -I.
CPPFLAGS = 
LDFLAGS = 
LIBS = 
ld_new_OBJECTS =  ldgram.$(OBJEXT) ldlex.$(OBJEXT) lexsup.$(OBJEXT) \
ldlang.$(OBJEXT) mri.$(OBJEXT) ldctor.$(OBJEXT) ldmain.$(OBJEXT) \
ldwrite.$(OBJEXT) ldexp.$(OBJEXT) ldemul.$(OBJEXT) ldver.$(OBJEXT) \
ldmisc.$(OBJEXT) ldfile.$(OBJEXT) ldcref.$(OBJEXT)
ld_new_LDFLAGS = 
LEX_OUTPUT_ROOT = lex.yy
LEXLIB = -lfl
YLWRAP = $(top_srcdir)/../ylwrap
CFLAGS = -g -O2
COMPILE = $(CC) $(DEFS) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
LTCOMPILE = $(LIBTOOL) --mode=compile $(CC) $(DEFS) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
CCLD = $(CC)
LINK = $(LIBTOOL) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(LDFLAGS) -o $@
TEXI2DVI = `if test -f $(top_srcdir)/../texinfo/util/texi2dvi; then echo $(top_srcdir)/../texinfo/util/texi2dvi; else echo texi2dvi; fi`
TEXINFO_TEX = $(top_srcdir)/../texinfo/texinfo.tex
INFO_DEPS = ld.info
DVIS = ld.dvi
TEXINFOS = ld.texinfo
man1dir = $(mandir)/man1
MANS = $(man_MANS)

NROFF = nroff
DIST_COMMON =  README ./stamp-h.in ChangeLog Makefile.am Makefile.in \
NEWS TODO acinclude.m4 aclocal.m4 config.in configure configure.in \
deffilep.c ldgram.c ldlex.c


DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST)

TAR = tar
GZIP_ENV = --best
SOURCES = $(ld_new_SOURCES) $(EXTRA_ld_new_SOURCES)
OBJECTS = $(ld_new_OBJECTS)

all: all-redirect
.SUFFIXES:
.SUFFIXES: .S .c .dvi .info .l .lo .o .obj .ps .s .texi .texinfo .txi .y
$(srcdir)/Makefile.in: # Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4) 
	cd $(top_srcdir) && $(AUTOMAKE) --cygnus Makefile

Makefile: $(srcdir)/Makefile.in  $(top_builddir)/config.status
	cd $(top_builddir) \
	  && CONFIG_FILES=$@ CONFIG_HEADERS= $(SHELL) ./config.status

$(ACLOCAL_M4): # configure.in  acinclude.m4
	cd $(srcdir) && $(ACLOCAL)
$(srcdir)/configure: #$(srcdir)/configure.in $(ACLOCAL_M4) $(CONFIGURE_DEPENDENCIES)
	cd $(srcdir) && $(AUTOCONF)

config.h: stamp-h
	@if test ! -f $@; then \
		rm -f stamp-h; \
		$(MAKE) stamp-h; \
	else :; fi
stamp-h: $(srcdir)/config.in $(top_builddir)/config.status
	cd $(top_builddir) \
	  && CONFIG_FILES= CONFIG_HEADERS=config.h:config.in \
	     $(SHELL) ./config.status
	@echo timestamp > stamp-h 2> /dev/null
$(srcdir)/config.in: #$(srcdir)/stamp-h.in
	@if test ! -f $@; then \
		rm -f $(srcdir)/stamp-h.in; \
		$(MAKE) $(srcdir)/stamp-h.in; \
	else :; fi
$(srcdir)/stamp-h.in: $(top_srcdir)/configure.in $(ACLOCAL_M4) 
	cd $(top_srcdir) && $(AUTOHEADER)
	@echo timestamp > $(srcdir)/stamp-h.in 2> /dev/null

mostlyclean-hdr:

clean-hdr:

distclean-hdr:
	-rm -f config.h

maintainer-clean-hdr:

mostlyclean-noinstPROGRAMS:

clean-noinstPROGRAMS:
	-test -z "$(noinst_PROGRAMS)" || rm -f $(noinst_PROGRAMS)

distclean-noinstPROGRAMS:

maintainer-clean-noinstPROGRAMS:

.c.o:
	$(COMPILE) -c $<

# FIXME: We should only use cygpath when building on Windows,
# and only if it is available.
.c.obj:
	$(COMPILE) -c `cygpath -w $<`

.s.o:
	$(COMPILE) -c $<

.S.o:
	$(COMPILE) -c $<

mostlyclean-compile:
	-rm -f *.o core *.core
	-rm -f *.$(OBJEXT)

clean-compile:

distclean-compile:
	-rm -f *.tab.c

maintainer-clean-compile:

.c.lo:
	$(LIBTOOL) --mode=compile $(COMPILE) -c $<

.s.lo:
	$(LIBTOOL) --mode=compile $(COMPILE) -c $<

.S.lo:
	$(LIBTOOL) --mode=compile $(COMPILE) -c $<

mostlyclean-libtool:
	-rm -f *.lo

clean-libtool:
	-rm -rf .libs _libs

distclean-libtool:

maintainer-clean-libtool:

ld-new$(EXEEXT): $(ld_new_OBJECTS) $(ld_new_DEPENDENCIES)
	@rm -f ld-new$(EXEEXT)
	$(LINK) $(ld_new_LDFLAGS) $(ld_new_OBJECTS) $(ld_new_LDADD) $(LIBS)
.l.c:
	$(LEX) $(AM_LFLAGS) $(LFLAGS) $< && mv $(LEX_OUTPUT_ROOT).c $@
.y.c:
	$(SHELL) $(YLWRAP) "$(YACC)" $< y.tab.c $*.c y.tab.h $*.h -- $(AM_YFLAGS) $(YFLAGS)
deffilep.h: deffilep.c
ldgram.h: ldgram.c


ld.info: ld.texinfo
ld.dvi: ld.texinfo


DVIPS = dvips

.texi.info:
	@rm -f $@ $@-[0-9] $@-[0-9][0-9]
	$(MAKEINFO) -I $(srcdir) $<

.texi.dvi:
	TEXINPUTS=$(top_srcdir)/../texinfo/texinfo.tex:$$TEXINPUTS \
	  MAKEINFO='$(MAKEINFO) -I $(srcdir)' $(TEXI2DVI) $<

.texi:
	@rm -f $@ $@-[0-9] $@-[0-9][0-9]
	$(MAKEINFO) -I $(srcdir) $<

.texinfo.info:
	@rm -f $@ $@-[0-9] $@-[0-9][0-9]
	$(MAKEINFO) -I $(srcdir) $<

.texinfo:
	@rm -f $@ $@-[0-9] $@-[0-9][0-9]
	$(MAKEINFO) -I $(srcdir) $<

.texinfo.dvi:
	TEXINPUTS=$(top_srcdir)/../texinfo/texinfo.tex:$$TEXINPUTS \
	  MAKEINFO='$(MAKEINFO) -I $(srcdir)' $(TEXI2DVI) $<

.txi.info:
	@rm -f $@ $@-[0-9] $@-[0-9][0-9]
	$(MAKEINFO) -I $(srcdir) $<

.txi.dvi:
	TEXINPUTS=$(top_srcdir)/../texinfo/texinfo.tex:$$TEXINPUTS \
	  MAKEINFO='$(MAKEINFO) -I $(srcdir)' $(TEXI2DVI) $<

.txi:
	@rm -f $@ $@-[0-9] $@-[0-9][0-9]
	$(MAKEINFO) -I $(srcdir) $<
.dvi.ps:
	$(DVIPS) $< -o $@

install-info-am: $(INFO_DEPS)
	@$(NORMAL_INSTALL)
	$(mkinstalldirs) $(DESTDIR)$(infodir)
	@list='$(INFO_DEPS)'; \
	for file in $$list; do \
	  if test -f $$file; then d=.; else d=$(srcdir); fi; \
	  for ifile in `cd $$d && echo $$file $$file-[0-9] $$file-[0-9][0-9]`; do \
	    if test -f $$d/$$ifile; then \
	      echo " $(INSTALL_DATA) $$d/$$ifile $(DESTDIR)$(infodir)/$$ifile"; \
	      $(INSTALL_DATA) $$d/$$ifile $(DESTDIR)$(infodir)/$$ifile; \
	    else : ; fi; \
	  done; \
	done
	@$(POST_INSTALL)
	@if $(SHELL) -c 'install-info --version | sed 1q | fgrep -s -v -i debian' >/dev/null 2>&1; then \
	  list='$(INFO_DEPS)'; \
	  for file in $$list; do \
	    echo " install-info --info-dir=$(DESTDIR)$(infodir) $(DESTDIR)$(infodir)/$$file";\
	    install-info --info-dir=$(DESTDIR)$(infodir) $(DESTDIR)$(infodir)/$$file || :;\
	  done; \
	else : ; fi

uninstall-info:
	$(PRE_UNINSTALL)
	@if $(SHELL) -c 'install-info --version | sed 1q | fgrep -s -v -i debian' >/dev/null 2>&1; then \
	  ii=yes; \
	else ii=; fi; \
	list='$(INFO_DEPS)'; \
	for file in $$list; do \
	  test -z "$ii" \
	    || install-info --info-dir=$(DESTDIR)$(infodir) --remove $$file; \
	done
	@$(NORMAL_UNINSTALL)
	list='$(INFO_DEPS)'; \
	for file in $$list; do \
	  (cd $(DESTDIR)$(infodir) && rm -f $$file $$file-[0-9] $$file-[0-9][0-9]); \
	done

dist-info: $(INFO_DEPS)
	list='$(INFO_DEPS)'; \
	for base in $$list; do \
	  if test -f $$base; then d=.; else d=$(srcdir); fi; \
	  for file in `cd $$d && eval echo $$base*`; do \
	    test -f $(distdir)/$$file \
	    || ln $$d/$$file $(distdir)/$$file 2> /dev/null \
	    || cp -p $$d/$$file $(distdir)/$$file; \
	  done; \
	done

mostlyclean-aminfo:
	-rm -f ld.aux ld.cp ld.cps ld.dvi ld.fn ld.fns ld.ky ld.kys ld.ps \
	  ld.log ld.pg ld.toc ld.tp ld.tps ld.vr ld.vrs ld.op ld.tr \
	  ld.cv ld.cn

clean-aminfo:

distclean-aminfo:

maintainer-clean-aminfo:
	for i in $(INFO_DEPS); do \
	  rm -f $$i; \
	  if test "`echo $$i-[0-9]*`" != "$$i-[0-9]*"; then \
	    rm -f $$i-[0-9]*; \
	  fi; \
	done
clean-info: mostlyclean-aminfo

install-man1:
	$(mkinstalldirs) $(DESTDIR)$(man1dir)
	@list='$(man1_MANS)'; \
	l2='$(man_MANS)'; for i in $$l2; do \
	  case "$$i" in \
	    *.1*) list="$$list $$i" ;; \
	  esac; \
	done; \
	for i in $$list; do \
	  if test -f $(srcdir)/$$i; then file=$(srcdir)/$$i; \
	  else file=$$i; fi; \
	  ext=`echo $$i | sed -e 's/^.*\\.//'`; \
	  inst=`echo $$i | sed -e 's/\\.[0-9a-z]*$$//'`; \
	  inst=`echo $$inst | sed '$(transform)'`.$$ext; \