byteblaster.c

UrJTAG package is free software, covered by the GNU General Public License, and you are welcome to

/*
 * $Id: byteblaster.c 1090 2008-02-24 14:52:44Z kawk $
 *
 * Altera ByteBlaster/ByteBlaster II/ByteBlasterMV Parallel Port Download Cable Driver
 * Copyright (C) 2002, 2003 ETC s.r.o.
 *
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License
 * as published by the Free Software Foundation; either version 2
 * of the License, or (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, write to the Free Software
 * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
 * 02111-1307, USA.
 *
 * Written by Marcel Telka <[e-mail]>, 2002, 2003.
 *
 * Documentation:
 * [1] Altera Corporation, "ByteBlaster Parallel Port Download Cable Data Sheet",
 *     February 1998, ver. 2.01, Order Number: A-DS-BYTE-02.01
 * [2] Altera Corporation, "ByteBlasterMV Parallel Port Download Cable Data Sheet",
 *     July 2002, Version 3.3, Order Number: DS-BYTBLMV-3.3
 * [3] Altera Corporation, "ByteBlaster II Parallel Port Download Cable Data Sheet",
 *     December 2002, Version 1.0, Order Number: DS-BYTEBLSTRII-1.0 L01-08739-00
 *
 */

#include "sysdep.h"

#include "cable.h"
#include "parport.h"
#include "chain.h"

#include "generic.h"
#include "generic_parport.h"

/*
 * data D[7:0] (pins 9:2)
 */
#define	TDI	6
#define	TCK	0
#define	TMS	1
#define	BB_CHECK	5

/*
 * 7 - BUSY (pin 11)
 * 6 - ACK (pin 10)
 * 5 - PE (pin 12)
 * 4 - SEL (pin 13)
 * 3 - ERROR (pin 15)
 */
#define	TDO	7
#define	BB_PRESENT	6
#define	VCC_OK_N	3

/*
 * 0 - STROBE (pin 1)
 * 1 - AUTOFD (pin 14)
 * 2 - INIT (pin 16)
 * 3 - SELECT (pin 17)
*/
#define	BB_ENABLE	0xC

static int
byteblaster_init( cable_t *cable )
{
	int BB_II = 0;

	if (parport_open( cable->link.port ))
		return -1;

	PARAM_TRST(cable) = 1;
	
	/* check if a ByteBlaster or ByteBlasterMV is connected */
	parport_set_data( cable->link.port, 1 << BB_CHECK);
	if ( !( ( parport_get_status( cable->link.port ) >> BB_PRESENT ) & 1 ) )
		BB_II = 1;
	parport_set_data( cable->link.port, 0);
	if ( ( parport_get_status( cable->link.port ) >> BB_PRESENT ) & 1 )
		BB_II = 1;
	
	/* check if the power supply is ok (only for ByteBlaster II) */
	/* if no ByteBlaster at all is connected this check will fail, too */
	if ( ( BB_II ) && ( ( parport_get_status( cable->link.port ) >> VCC_OK_N ) & 1 ) )
		return -1;
	
	/* Enable ByteBlaster */
	parport_set_control( cable->link.port, BB_ENABLE );

	return 0;
}

static void
byteblaster_clock( cable_t *cable, int tms, int tdi, int n )
{
	int i;

	tms = tms ? 1 : 0;
	tdi = tdi ? 1 : 0;

	for (i = 0; i < n; i++) {
		parport_set_data( cable->link.port, (0 << TCK) | (tms << TMS) | (tdi << TDI) );
		cable_wait( cable );
		parport_set_data( cable->link.port, (1 << TCK) | (tms << TMS) | (tdi << TDI) );
		cable_wait( cable );
	}
}

static int
byteblaster_get_tdo( cable_t *cable )
{
	parport_set_data( cable->link.port, 0 << TCK );
	cable_wait( cable );
	return (parport_get_status( cable->link.port ) >> TDO) & 1;
}

static int
byteblaster_set_trst( cable_t *cable, int trst )
{
	return 1;
}

cable_driver_t byteblaster_cable_driver = {
	"ByteBlaster",
	N_("Altera ByteBlaster/ByteBlaster II/ByteBlasterMV Parallel Port Download Cable"),
	generic_parport_connect,
	generic_disconnect,
	generic_parport_free,
	byteblaster_init,
	generic_parport_done,
	generic_set_frequency,
	byteblaster_clock,
	byteblaster_get_tdo,
	generic_transfer,
	byteblaster_set_trst,
	generic_get_trst,
	generic_flush_one_by_one,
	generic_parport_help
};