📄 serchan.cxx
字号:
/*
* serchan.cxx
*
* Asynchronous serial I/O channel class implementation.
*
* Portable Windows Library
*
* Copyright (c) 1993-1998 Equivalence Pty. Ltd.
*
* The contents of this file are subject to the Mozilla Public License
* Version 1.0 (the "License"); you may not use this file except in
* compliance with the License. You may obtain a copy of the License at
* http://www.mozilla.org/MPL/
*
* Software distributed under the License is distributed on an "AS IS"
* basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See
* the License for the specific language governing rights and limitations
* under the License.
*
* The Original Code is Portable Windows Library.
*
* The Initial Developer of the Original Code is Equivalence Pty. Ltd.
*
* Portions are Copyright (C) 1993 Free Software Foundation, Inc.
* All Rights Reserved.
*
* Contributor(s): ______________________________________.
*
* $Log: serchan.cxx,v $
* Revision 1.10 1998/12/21 06:08:08 robertj
* Fixed warning on solaris x86 GNU system.
*
* Revision 1.9 1998/11/30 21:51:54 robertj
* New directory structure.
*
* Revision 1.8 1998/11/24 09:39:14 robertj
* FreeBSD port.
*
* Revision 1.7 1998/09/24 04:12:17 robertj
* Added open software license.
*
*/
#pragma implementation "serchan.h"
#pragma implementation "modem.h"
#include <ptlib.h>
#include <fcntl.h>
#include <signal.h>
#include <sys/ioctl.h>
#if defined(P_FREEBSD)
#include <sys/ttycom.h>
#define TCGETA TIOCGETA
#define TCSETAW TIOCSETAW
#elif defined(P_SUN4)
#include <sys/termio.h>
extern "C" int ioctl(int, int, void *);
#elif defined(P_VXWORKS)
#include <if_sl.h>
#endif
//#define BINARY_LOCK 1
#define LOCK_PREFIX "/var/spool/uucp/LCK.."
#define DEV_PREFIX "/dev/"
#define PORTLISTENV "PWLIB_SERIALPORTS"
#define DEV_PREFIX "/dev/"
#include "../common/serial.cxx"
////////////////////////////////////////////////////////////////
//
// PSerialChannel
//
void PSerialChannel::Construct()
{
// set control modes: 9600, N, 8, 1, local line
baudRate = 9600;
dataBits = 8;
parityBits = NoParity;
stopBits = 1;
#if !defined (P_VXWORKS)
Termio.c_cflag = B9600 | CS8 | CSTOPB | CREAD | CLOCAL;
// set input mode: ignore breaks, ignore parity errors, do not strip chars,
// no CR/NL conversion, no case conversion, no XON/XOFF control,
// no start/stop
Termio.c_iflag = IGNBRK | IGNPAR;
// set output mode: no post process output,
Termio.c_oflag = 0;
// set line discipline
Termio.c_lflag = 0;
#else
PAssertAlways(PUnimplementedFunction);
// init
#endif
}
BOOL PSerialChannel::Close()
{
#if defined (P_VXWORKS)
PAssertAlways(PUnimplementedFunction);
return false; //return slipDelete(1) == OK;
#else {
if (os_handle >= 0) {
// delete the lockfile
PFile::Remove(PString(LOCK_PREFIX) + channelName);
// restore the original terminal settings
::ioctl(os_handle, TCSETAW, &oldTermio);
}
return PChannel::Close();
}
#endif
}
BOOL PSerialChannel::Open(const PString & port,
DWORD speed,
BYTE data,
Parity parity,
BYTE stop,
FlowControl inputFlow,
FlowControl outputFlow)
{
// if the port is already open, close it
if (IsOpen())
Close();
// // check prefix of name
// if (port.Left(PORT_PREFIX_LEN) != PORT_PREFIX) {
// lastError = BadParameter;
// return FALSE;
// }
// // check suffix
// int portnum = (port.Right(port.GetLength()-PORT_PREFIX_LEN)).AsInteger();
// if ((portnum < PORT_START) || (portnum >= (PORT_START + PORT_COUNT))) {
// lastError = BadParameter;
// return FALSE;
// }
// save the port name
channelName = port;
#if defined(P_VXWORKS)
PAssertAlways(PUnimplementedFunction);
return false; // not implemented yet
#else
// construct lock filename
PString lockfilename = PString(LOCK_PREFIX) + port;
// if the file exists, probe the process to see if it is still running
if (PFile::Exists(lockfilename)) {
PFile lockfile(lockfilename, PFile::ReadOnly);
int lock_pid;
#ifdef BINARY_LOCK
lockfile.Read(&lock_pid, sizeof(lock_pid));
#else
char lock_pid_str[20];
lockfile.Read(&lock_pid_str, 20);
lock_pid = atoi(lock_pid_str);
#endif
// if kill returns 0, then the port is in use
if (kill(lock_pid, 0) == 0) {
lastError = DeviceInUse;
return FALSE;
}
// remove the lock file
lockfile.Remove();
}
// create new lockfile with our PID
PFile lockfile(lockfilename, PFile::WriteOnly, PFile::Create);
int pid = getpid();
#ifdef BINARY_LOCK
lockfile.Write(&pid, sizeof(pid));
#else
lockfile << pid;
#endif
lockfile.Close();
// attempt to open the device
PString device_name = PString(DEV_PREFIX) + port;
if ((os_handle = ::open((const char *)device_name, O_RDWR|O_NONBLOCK)) < 0) {
lastError = AccessDenied;
Close();
return FALSE;
}
// save the current port setup
::ioctl(os_handle, TCGETA, &oldTermio);
// save the channel name
channelName = port;
// now set the mode that was passed in
SetSpeed(speed);
SetDataBits(data);
SetParity(parity);
SetStopBits(stop);
SetInputFlowControl(inputFlow);
SetOutputFlowControl(outputFlow);
::fcntl(os_handle, F_SETFD, 1);
return TRUE;
#endif // vxworks
}
BOOL PSerialChannel::SetSpeed(DWORD speed)
{
int baud;
#ifndef P_VXWORKS // added by Jurjan
int mask = 0;
#endif
#ifdef CBAUD
mask |= CBAUD;
#endif
switch(speed) {
#ifdef CBAUD
#ifdef B50
case 50:
baud = B50;
break;
#endif
#ifdef B75
case 75:
baud = B75;
break;
#endif
#ifdef B110
case 110:
baud = B110;
break;
#endif
#ifdef B134
case 134:
baud = B134;
break;
#endif
#ifdef B150
case 150:
baud = B150;
break;
#endif
#ifdef B200
case 200:
baud = B200;
break;
#endif
#ifdef B300
case 300:
baud = B300;
break;
#endif
#ifdef B600
case 600:
baud = B600;
break;
#endif
#ifdef B1200
case 1200:
baud = B1200;
break;
#endif
#ifdef B1800
case 1800:
baud = B1800;
break;
#endif
#ifdef B2400
case 2400:
baud = B2400;
break;
#endif
#ifdef B4800
case 4800:
baud = B4800;
break;
#endif
#ifdef B9600
case 9600:
baud = B9600;
break;
#endif
#ifdef B19200
case 19200:
baud = B19200;
break;
#endif
#ifdef B38400
case 38400:
baud = B38400;
break;
#endif
#endif
default:
baud = 0;
};
if (baud == 0) {
lastError = BadParameter;
return FALSE;
}
// set new baud rate
baudRate = speed;
#if !defined(P_VXWORKS)
Termio.c_cflag &= ~mask;
Termio.c_cflag |= baud;
if (os_handle >= 0)
::ioctl(os_handle, TCSETAW, &Termio);
#else // added by Jurjan
slipBaudSet(1, speed);
#endif
return TRUE;
}
DWORD PSerialChannel::GetSpeed() const
{
PAssertAlways(PUnimplementedFunction);
return 0;
}
BYTE PSerialChannel::GetStopBits() const
{
PAssertAlways(PUnimplementedFunction);
return 0;
}
BYTE PSerialChannel::GetDataBits() const
{
PAssertAlways(PUnimplementedFunction);
return 0;
}
PSerialChannel::Parity PSerialChannel::GetParity() const
{
PAssertAlways(PUnimplementedFunction);
return (Parity)0;
}
BOOL PSerialChannel::SetDataBits(BYTE data)
{
int flags;
int mask = 0;
#ifdef CSIZE
mask |= CSIZE;
#endif
switch (data) {
#ifdef CSIZE
#ifdef CS5
case 5:
flags = CS5;
break;
#endif
#ifdef CS6
case 6:
flags = CS6;
break;
#endif
#ifdef CS7
case 7:
flags = CS7;
break;
#endif
#ifdef CS8
case 8:
flags = CS8;
break;
#endif
#endif
default:
flags = 0;
break;
}
if (flags == 0) {
lastError = BadParameter;
return FALSE;
}
// set the new number of data bits
dataBits = data;
#if !defined(P_VXWORKS)
Termio.c_cflag &= ~mask;
Termio.c_cflag |= flags;
if (os_handle >= 0)
::ioctl(os_handle, TCSETAW, &Termio);
#else
PAssertAlways(PUnimplementedFunction);
// not implemented
#endif
return TRUE;
}
BOOL PSerialChannel::SetParity(Parity parity)
{
int flags;
int mask = 0;
#ifdef PARENB
mask |= PARENB;
#ifdef PARODD
mask |= PARODD;
#endif
#endif
switch (parity) {
#ifdef PARENB
#ifdef PARODD
case OddParity:
case DefaultParity:
flags = PARODD | PARENB;
break;
#endif
case EvenParity:
flags = PARENB;
#endif
case NoParity:
flags = 0;
break;
case MarkParity:
case SpaceParity:
default:
flags = 0;
}
if (flags == 0) {
lastError = BadParameter;
return FALSE;
}
// set the new parity
parityBits = parity;
#if !defined(P_VXWORKS)
Termio.c_cflag &= ~mask;
Termio.c_cflag |= flags;
if (os_handle >= 0)
::ioctl(os_handle, TCSETAW, &Termio);
#else
PAssertAlways(PUnimplementedFunction);
// not implemented
#endif
return TRUE;
}
BOOL PSerialChannel::SetStopBits(BYTE stop)
{
int flags;
#ifndef P_VXWORKS // added by Jurjan
int mask = 0;
#endif
#ifdef CSTOPB
mask |= CSTOPB;
#endif
switch (stop) {
#ifdef CSTOPB
case 1:
flags = 0;
break;
case 2:
flags = CSTOPB;
break;
#endif
default:
flags = 0;
}
if (flags == 0) {
lastError = BadParameter;
return FALSE;
}
// set the new number of stop bits
dataBits = stop;
#if !defined(P_VXWORKS)
Termio.c_cflag &= ~mask;
Termio.c_cflag |= flags;
if (os_handle >= 0)
::ioctl(os_handle, TCSETAW, &Termio);
#else
PAssertAlways(PUnimplementedFunction);
// not implemented
#endif
return TRUE;
}
BOOL PSerialChannel::SetInputFlowControl(FlowControl)
{
return TRUE;
}
PSerialChannel::FlowControl PSerialChannel::GetInputFlowControl() const
{
return NoFlowControl;
}
BOOL PSerialChannel::SetOutputFlowControl(FlowControl)
{
return TRUE;
}
PSerialChannel::FlowControl PSerialChannel::GetOutputFlowControl() const
{
return NoFlowControl;
}
void PSerialChannel::SetDTR(BOOL)
{
}
void PSerialChannel::SetRTS(BOOL)
{
}
void PSerialChannel::SetBreak(BOOL)
{
}
BOOL PSerialChannel::GetCTS()
{
return FALSE;
}
BOOL PSerialChannel::GetDSR()
{
return FALSE;
}
BOOL PSerialChannel::GetDCD()
{
return FALSE;
}
BOOL PSerialChannel::GetRing()
{
return FALSE;
}
PStringList PSerialChannel::GetPortNames()
{
PStringList ports;
char * env = getenv(PORTLISTENV);
if (env != NULL) {
PString str(env);
PStringArray tokens = str.Tokenise(" ,\t", FALSE);
PINDEX i;
for (i = 0; i < tokens.GetSize(); i++)
ports.AppendString(tokens[i]);
} else {
ports.AppendString(PString("ttyS0"));
ports.AppendString(PString("ttyS1"));
ports.AppendString(PString("ttyS2"));
ports.AppendString(PString("ttyS3"));
}
return ports;
}
⌨️ 快捷键说明
复制代码
Ctrl + C
搜索代码
Ctrl + F
全屏模式
F11
切换主题
Ctrl + Shift + D
显示快捷键
?
增大字号
Ctrl + =
减小字号
Ctrl + -