messages.tcl

mysql-5.0.22.tar.gz源码包

     targets by name.  Only one registry is required on your network, \
     and it can run on any networked host."

set strTable(1192_REGISTRY_NAME) \
    "Please enter the name of the host where the Tornado Registry will\
     be running."

set strTable(1200_FINISH_WARN) \
    "format %s \"However, there were \[errorCountGet\] error(s) which occured\
	         during the process.  Please review the log file\
		 \[destDirDispGet\]/setup.log for more information.\""

set strTable(1210_FINISH) \
    "format %s \"SETUP has completed installing the selected product(s).\""

set strTable(1212_FINISH) \
    "SETUP has completed installing the program folders and icons."
                    
set strTable(1213_FINISH) \
    "Terminating SETUP program."

set strTable(1360_QUIT_CALLBACK) \
    "format %s \"SETUP is not complete. If you quit the SETUP program now,\
                 \[cdromDescGet\] will not be installed.\n\nYou may run\
                 the SETUP program at a later time to complete the\
                 installation.\
		 \n\nTo continue installing the program, click <Resume>.  \
		 To quit the SETUP program, click <Exit SETUP>.\""

set strTable(3360_QUIT_CALLBACK) \
    "format %s \"SETUP is not complete. If you quit the SETUP program now,\
                 \[cdromDescGet\] will not be installed.\n\nYou may run the\
		 SETUP program at a later time to complete the installation.\
		 \n\nTo continue installing the program,  Press <Return>.  \
		 To quit the SETUP program, type \'exit\'.\""

set strTable(1370_FILE_ACCESS_ERROR) \
    "format %s \"SETUP cannot create/update file \[lindex \$args 0\]:\
		 \[lindex \$args 1\]\""

set strTable(1380_DEFLATE_ERROR) \
    "format %s \"SETUP isn\'t able to deflate \[setupFileNameGet 0\]\
                 \n\nPlease select one of the following options\
                 to continue with the SETUP process.\""

set strTable(1390_MEMORY_LOW) \
    "The system is running out of memory.  To continue, close applications\
     or increase the system swap space."

set strTable(1400_DISK_FULL) \
    "No disk space left.  To continue, free up some disk space."

set strTable(1550_USAGE) \
    "Usage: SETUP /I\[con\]\]\t\n\
            /I : Add standard Tornado icons \n\
                 from a remote installation"

set strTable(1410_TITLE_WELCOME) "Welcome"
set strTable(1420_TITLE_WARNING) "Warning"
set strTable(1430_TITLE_REGISTRATION) "User Registration"
set strTable(1440_TITLE_DESTDIR) "Select Directory"
set strTable(1450_TITLE_OPTION) "Select Products"
set strTable(1460_TITLE_PERMISSION) "Permission"
set strTable(1470_TITLE_FILECOPY) "Copying Files"
set strTable(1480_TITLE_LIBUPDATE) "Update Libraries"
set strTable(1490_TITLE_REGISTRY_HOST) "Tornado Registry"
set strTable(1495_TITLE_BACKWARD_COMPATIBILITY) "Backward Compatibility"
set strTable(1500_TITLE_FINISH) "Finish"
set strTable(1560_TITLE_FOLDER) "Select Folder"
set strTable(1563_TITLE_DLL_REG) "Software Registration"
set strTable(1567_TITLE_DCOM) "DCOM Installation"

set strTable(1570_OPTION_SELECT) \
    "Choose one of the options listed below, then click the\
     <Next> button to continue the installation."

set strTable(1576_OPTION_MANUAL) \
    "Install Tornado Registry manually"

set strTable(1577_OPTION_STARTUP) \
    "Install Tornado Registry locally in the Startup Group"

set strTable(1578_OPTION_SERVICE) \
    "Install Tornado Registry locally as a Service"

set strTable(1579_OPTION_REMOTE) \
    "Configure to use a remote Tornado Registry"

set strTable(1580_OPTION_DESC) \
    "If you plan on running Tornado in a non-networked environment, we\
     recommend that you install the registry in your Startup Group or as an\
     NT Service.  For more information, consult your Tornado User\'s Guide."

set strTable(1581_OPTION_DESC) \
    "If you plan on running Tornado in a non-networked environment, we\
     recommend that you install the registry in your Startup Group.  For more\
     information, consult your Tornado User\'s Guide."

set strTable(3000_RETURN_QUESTION) \
    "Press <Return> to continue"

set strTable(3055_EXIT_QUESTION) \
    "Type \'exit\' to quit the program or press <Return> to continue"

set strTable(3370_BACK_CALLBACK) \
    "Cannot go back further."

set strTable(1080_WARN_4) \
    "The installation key you entered attempted to unlock one or more \
     products that may have been removed from our product line. \
     Please compare the unlocked product list on the\
     \"[strTableGet 1450_TITLE_OPTION]\" screen with your purchased order\
     list, and contact us if you discover any differences."

set strTable(4000_BASE_INSTALL_WARN) \
      "format %s \"Warning! Re-installing Tornado over an existing \
		tree will overwrite any installed patches. \
		If you proceed with the installation, please \
		re-install patches if any.\""

set strTable(4000_BASE_INSTALL_WARN_1) \
    "Select <Install> to overwrite existing Tornado installation,\
     or choose <Select Path> to enable you to back up to the \'Select\
     Directory\' page to enter an alternate path."

set strTable(4010_FILE_EXISTS_OLDER_WARN) \
     "format %s \"The file \'\$current_file\' exists in your destination\
                directory path \'\[destDirGet\]\' and is older.  You can\
                set the policy for handling duplicate files by\
                selecting one of the following buttons.  All files to be\
                overwritten will be backed up.\""

set strTable(4010_FILE_EXISTS_NEWER_WARN) \
     "format %s \"The file \'\$current_file\' exists in your destination\
                directory path \'\[destDirGet\]\' and is newer.  You can\
                set the policy for handling duplicate files by\
                selecting one of the following buttons.  All files to be\
                overwritten will be backed up.\""

set strTable(4010_FILE_EXISTS_WARN_1) \
    "Overwrite the existing file."

set strTable(4010_FILE_EXISTS_WARN_2) \
    "Do not overwrite the existing file."

set strTable(4010_FILE_EXISTS_WARN_3) \
    "Overwrite ALL files, do not show this dialog again."

set strTable(4020_ANALYZING_BANNER) \
    "Analyzing installation files, please wait..."

set strTable(4030_NO_ZIP_FILE) \
    "format %s \"SETUP cannot find the ZIP files for installing\
               \[cdromDescGet\] in the default directory.\n\n\
               Please type the name of the WIND\
               directory containing the ZIP files.\n\nClick the\
               <Browse> button to choose the directory interactively.\""

set strTable(4040_LIC_TEXT) \
   "Attention: By clicking on the \"I accept\" button or by\
   Installing the software you are consenting to be bound by\
   the terms of this agreement (this \"Agreement\").  If you do\
   not agree to all of the terms, click the \"I don't Accept\" button\
   and do not install this software.  A copy of this Agreement can be viewed\
   in the Setup directory under the destination path that you have\
   designated after the installation is completed." 

set strTable(4050_PROJECT_TEXT) \
    "Please enter your project name, and the number of licensed\
    users on the project in the spaces below."

set strTable(4060_LICENSE_TEXT) \
    "By clicking on the \"I accept\" button \
    you are consenting to be bound by the terms of this agreement.\
    If you do not agree to all of the terms, click the \"Cancel\"\
    button and do not install this software."

set strTable(4070_DLL_TEXT) \
    "SETUP is registering software on your machine. This will take a few\
    minutes."

set strTable(4080_DCOM_TEXT) \
    "Setup has detected that your COM/DCOM DLLs must\
     be updated for the correct operation of Tornado 2.0.\
     \n\n\
     Setup will now ask you to run DCOM95 to update your\
     DLLs.\
     \n\n\
     You will have to reboot your system after DLL files have been\
     installed. Please rerun SETUP to continue with installation\
     after your system has rebooted.\
     \n\n\
     Note: The DCOM95 installation programs update your\
     system DLLs. You should save all open documents and close all\
     programs before proceeding.\
     \n\nWould you like to install \"DCOM95\" now?"

set strTable(4082_DCOM95_AND_COMCTL_TEXT) \
    "Setup has detected that your COM/DCOM and Common Control DLLs must\
     be updated for the correct operation of Tornado 2.0.\
     \n\n\
     Setup will now ask you to run DCOM95 and 401comupd.exe to update your\
     DLLs.\
     \n\n\
     You must reboot your system after DLL files have been\
     installed. After rebooting, please rerun SETUP to continue with\
     installation.\
     \n\n\
     Note: 401comupd.exe and DCOM95 installation programs update your\
     system DLLs. You should save all open documents and close all\
     programs before proceeding\
     \n\nWould you like to install \"401comupd.exe\" and \"DCOM95\" now?"

set strTable(4085_COMCTL_UPDATE_TEXT) \
    "Setup has detected that your Common Control DLLs must\
     be updated for the correct operation of Tornado 2.0.\
     \n\n\
     Setup will now ask you to run DCOM95 and 401comupd.exe to update your\
     DLLs.\
     \n\n\
     You will have to reboot your system after DLL files have been\
     installed. Please rerun SETUP to continue with installation\
     after your system has rebooted.\
     \n\n\
     Note: The 401comupd.exe installation program updates your system DLLs. You\
     should save all open documents and close all programs before installing\
     401comupd.exe.\
     \n\nWould you like to install \"401comupd.exe\" now?"

set strTable(4090_README_TEXT) \
    "Please read the README file contents that are displayed below.\
     It contains important information that will enable you to install\
     and successfully run the BerkeleyDB product.  For your convenience\
     this file is copied to your installation directory path."

set strTable(5000_PATCHES_REQUIRED_TEXT) \
    "SETUP has detected that required operating system patches\
     have not been installed on this machine.  These patches are\
     necessary for the correct operation of SETUP and Tornado.  Please refer\
     to the Tornado Release Notes for details.\n\n\
     The following operating system patches must be installed before\
     you can continue with installation:\n\n"

set strTable(5001_PATCHES_RECOMMENDED_TEXT) \
    "\n\nSETUP has also detected that recommended operating system patches\
     have not been installed.  It is recommended that these patches are\
     installed before starting Tornado to ensure correct operation.\n\n\
     The following operating system patches are recommended to be installed:\n\n"

set strTable(5002_PATCHES_RECOMMENDED_TEXT) \
    "SETUP has detected that some operating system patches have not been\
     installed on this machine.  It is recommended that these\
     patches are installed before starting Tornado to ensure correct\
     operation.  Please refer to the Tornado Release Notes\
     for details.\n\n\
     The following operating system patches are recommended to be installed:\n\n"

set strTable(5003_PATCHES_REQUIRED_FORMATTED_TEXT) \
    "\n SETUP has detected that required operating system patches\n\
     have not been installed on this machine.  These patches are\n\
     necessary for the correct operation of SETUP and Tornado.  Please refer\n\
     to the Tornado Release Notes for details.\n\n\
     The following operating system patches must be installed before\n\
     you can continue with installation:\n\n"

set strTable(5004_PATCHES_RECOMMENDED_FORMATTED_TEXT) \
    "\n\n SETUP has also detected that recommended operating system patches\n\
     have not been installed.  It is recommended that these patches are\n\
     installed before starting Tornado to ensure correct operation.\n\n\
     The following operating system patches are recommended to be installed:\n\n"

set strTable(5005_PATCHES_RECOMMENDED_FORMATTED_TEXT) \
    "\n SETUP has detected that some operating system patches have not been\n\
     installed on this machine.  It is recommended that these\n\
     patches are installed before starting Tornado to ensure correct\n\
     operation.  Please refer to the Tornado Release Notes\n\
     for details.\n\n\
     The following operating system patches are recommended to be installed:\n\n"

set strTable(5006_PATCHES_SUN_LOCATION) \
    "\nPatches for Sun machines are available at http://sunsolve.sun.com.\n"

set strTable(5007_PATCHES_HP_LOCATION) \
    "\nPatches for HP machines are available at:\n\
     http://us-support.external.hp.com (US, Canada, Asia-Pacific, and\
     Latin-America)\n\
     http://europe-support.external.hp.com (Europe)\n"

set strTable(5008_PATCHES_UPDATE) \
    "\nNote: System vendors very frequently update and replace patches.\
    If a specific patch is no longer available, please use the\
    replacement patch suggested by the system vendor.\n"

set strTable(5009_PATCHES_UPDATE_FORMATTED) \
    "\n Note: System vendors very frequently update and replace patches.\n\
    If a specific patch is no longer available, please use the\n\
    replacement patch suggested by the system vendor.\n"

set strTable(5010_DRIVERS_INFO) \
    "The installation of the Driver component is required because\n\
     you have selected the basic Tornado product for installation.\n\n\
     If you wish to uncheck this item you must uncheck either the\n\
     basic Tornado and/or Tornado Simulator product(s) or go to the\n\
     'Details' button for Tornado and uncheck both the Simulator and\n\
     the Tornado Object parts."

set strTable(5020_DO_NOT_SAVE_KEY_FOR_FAE) \
    "The installation key you are about to enter will NOT\
     be saved in the system registry.\nIs this what you want?"

set strTable(5030_BACKWARD_COMPATIBILITY) \
    "While the portmapper is not needed for Tornado 2.0, it is\
     included in this release for development environments in\
     which both Tornado 2.0 and Tornado 1.0.1 are in use.\
     \n\nWould you like to use your Tornado 1.0.x tools with Tornado 2.0?"

set strTable(5040_BACKWARD_COMPATIBILITY) \
    "Note:\
     \n\nIf you have selected to install the Tornado Registry as\
     a service, there is no way to retain backward compatibility\
     with Tornado 1.0.x."

set strTable(5050_BACKWARD_COMPATIBILITY) \
    "For more information on backward compatibility,\
     please consult the Tornado 2.0 Release Notes."