scatu26_06b.txt

MTK多串口下载工具。可以多台升级。目前已知的MTK芯片都可以用此工具下载

;/*****************************************************************************
;*  Copyright Statement:
;*  --------------------
;*  This software is protected by Copyright and the information contained
;*  herein is confidential. The software may not be copied and the information
;*  contained herein may not be used or disclosed except with the written
;*  permission of MediaTek Inc. (C) 2006
;*
;*  BY OPENING THIS FILE, BUYER HEREBY UNEQUIVOCALLY ACKNOWLEDGES AND AGREES
;*  THAT THE SOFTWARE/FIRMWARE AND ITS DOCUMENTATIONS ("MEDIATEK SOFTWARE")
;*  RECEIVED FROM MEDIATEK AND/OR ITS REPRESENTATIVES ARE PROVIDED TO BUYER ON
;*  AN "AS-IS" BASIS ONLY. MEDIATEK EXPRESSLY DISCLAIMS ANY AND ALL WARRANTIES,
;*  EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF
;*  MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR NONINFRINGEMENT.
;*  NEITHER DOES MEDIATEK PROVIDE ANY WARRANTY WHATSOEVER WITH RESPECT TO THE
;*  SOFTWARE OF ANY THIRD PARTY WHICH MAY BE USED BY, INCORPORATED IN, OR
;*  SUPPLIED WITH THE MEDIATEK SOFTWARE, AND BUYER AGREES TO LOOK ONLY TO SUCH
;*  THIRD PARTY FOR ANY WARRANTY CLAIM RELATING THERETO. MEDIATEK SHALL ALSO
;*  NOT BE RESPONSIBLE FOR ANY MEDIATEK SOFTWARE RELEASES MADE TO BUYER'S
;*  SPECIFICATION OR TO CONFORM TO A PARTICULAR STANDARD OR OPEN FORUM.
;*
;*  BUYER'S SOLE AND EXCLUSIVE REMEDY AND MEDIATEK'S ENTIRE AND CUMULATIVE
;*  LIABILITY WITH RESPECT TO THE MEDIATEK SOFTWARE RELEASED HEREUNDER WILL BE,
;*  AT MEDIATEK'S OPTION, TO REVISE OR REPLACE THE MEDIATEK SOFTWARE AT ISSUE,
;*  OR REFUND ANY SOFTWARE LICENSE FEES OR SERVICE CHARGE PAID BY BUYER TO
;*  MEDIATEK FOR SUCH MEDIATEK SOFTWARE AT ISSUE.
;*
;*  THE TRANSACTION CONTEMPLATED HEREUNDER SHALL BE CONSTRUED IN ACCORDANCE
;*  WITH THE LAWS OF THE STATE OF CALIFORNIA, USA, EXCLUDING ITS CONFLICT OF
;*  LAWS PRINCIPLES.  ANY DISPUTES, CONTROVERSIES OR CLAIMS ARISING THEREOF AND
;*  RELATED THERETO SHALL BE SETTLED BY ARBITRATION IN SAN FRANCISCO, CA, UNDER
;*  THE RULES OF THE INTERNATIONAL CHAMBER OF COMMERCE (ICC).
;*
;*****************************************************************************/
;
;/*****************************************************************************
; *
; * Filename:
; * ---------
; *   scatU26_06B.txt
; *
; * Project:
; * --------
; *   Maui_Software
; *
; * Description:
; * ------------
; *   defines the memory map for the validation board
; *
; * Author:
; * -------
; *   system auto generator v0.34 -> p0.43
; *
; * Last modified Date:
; * -------
; *   2007/5/15
; *
; ****************************************************************************/
;
;--------------------
; SCHEME   : external 15MB flash memory and 4MB SRAM
; PLATFORM : MT6226
;--------------------

ROM 0x08000000 0x00E00000
{
    ROM 0x08000000 0x00400000
    {
         bootarm.obj (C$$code,+First)
         *.obj (LEADING_PART,+First)
         *wap.lib (+RO-CODE)
         *plutommi.lib (+RO-CODE)
         *l4_classb.lib (+RO-CODE)
         *mtkapp.lib (+RO-CODE)
         *l1_classb.lib (+RO-CODE)
         *j2me.lib (+RO-CODE)
         *wapadp.lib (+RO-CODE)
         *jam.lib (+RO-CODE)
         *email.lib (+RO-CODE)
         *l4misc.lib (+RO-CODE)
    }
    ROM2 +0x0 0x00400000
    {
         .ANY (+RO-CODE)
    }
    ROM3 +0x0 
    {
         .ANY (+RO-DATA)
    }
    EXTSRAM_LARGEPOOL_NORMAL 0x00000140
    {
; For MT6219, MT6227, MT6226 projects, med_main.obj must be the first for tearing issue
         med_main.obj (LARGEPOOL_ZI,+First)
         app_mem.obj (LARGEPOOL_FIRST_ZI)
         j2me_custom_resource.obj (LARGEPOOL_ZI)
         ScrMemMgr.obj (LARGEPOOL_ZI)
    }
    EXTSRAM +0x00 
    {
         * (+RW, +ZI)
    }
    DUMMY_END 0x00400000 0x04
    {
         bootarm.obj (DUMMY_POOL)
    }
    INTSRAM_CODE 0x40000380 0x0000FC00
    {
; system-realted CODE , STANDARD set
         bootarm.obj (INTERNCODE)
         init.obj (SNORCODE)
         custom_emi.obj (INTERNCODE)
         isrentry.obj (INTERNCODE)
         data_buff_pool.obj (INTERNCODE)
         ctrl_buff_pool.obj (INTERNCODE)
         stack_buff_pool.obj (INTERNCODE)
         stack_ltlcom.obj (INTERNCODE)
         stack_timer.obj (INTERNCODE)
         lcd_dll.obj (INTERNCODE)
         event_shed.obj (INTERNCODE)
         intrCtrl.obj (INTERNCODE)
; Nucleus-related CODE , STANDARD set
         tct.obj (+RO)
         tcc.obj (INTERNCODE)
         csc.obj (INTERNCODE)
         tmt.obj (+RO)
         tms.obj (+RO)
         smc.obj (+RO)
         evc.obj (+RO)
         pmc.obj (+RO)
         quc.obj (+RO)
         kal_nucleus_buff_mgr.obj (INTERNCODE)
         kal_nucleus_evshed_buff_mgr.obj (INTERNCODE)
         kal_nucleus_itc.obj (INTERNCODE)
         kal_nucleus_timer.obj (INTERNCODE)
; THREADX-related CODE , STANDARD set
         tx_thread_interrupt_disable.obj (+RO)
         tx_thread_interrupt_restore.obj (+RO)
         tx_thread_context_save.obj (+RO)
         tx_thread_context_restore.obj (+RO)
         tx_thread_irq_nesting_start.obj (+RO)
         tx_thread_irq_nesting_end.obj (+RO)
         tx_thread_system_return.obj (+RO)
         tx_thread_schedule.obj (+RO)
         tx_thread_resume.obj (+RO)
         tx_thread_system_resume.obj (+RO)
         tx_timer_interrupt.obj (+RO)
         tx_timer_thread_entry.obj (+RO)
         tx_block_allocate.obj (+RO)
         tx_block_release.obj (+RO)
         tx_event_flags_get.obj (+RO)
         tx_event_flags_set.obj (+RO)
         tx_mutex_get.obj (+RO)
         tx_mutex_put.obj (+RO)
         kal_threadx_tasks.obj (INTERNCODE)
         kal_threadx_buff_mgr.obj (INTERNCODE)
         kal_threadx_itc.obj (INTERNCODE)
         kal_threadx_timer.obj (INTERNCODE)
; common used C library
         memset.o (+RO)
         rt_memclr.o (+RO)
         callvia.o (+RO)
         _sprintf.o (+RO)
         rt_memcpy.o (+RO)
         lludiv10.o (+RO)
         rt_udiv.o (+RO)
         uread4.o (+RO)
         uwrite4.o (+RO)
; INTSRAM_CODE_OBJ_others_6227
         mpal_gprs_common_func.obj (INTERNCODE)
         mpal_gprs_dl_msg_hdlr.obj (INTERNCODE)
         m11194.obj (INTERNCODE)
         m11191.obj (INTERNCODE)
         l1d_data.obj (INTERNCODE)
         l1d_internal_data.obj (INTERNCODE)
         m12110.obj (INTERNCODE)
         m12120.obj (INTERNCODE)
         m12160.obj (INTERNCODE)
         m12170.obj (INTERNCODE)
         m12168.obj (INTERNCODE)
         m12180.obj (INTERNCODE)                  
         m11303.obj (INTERNCODE)
         m11305.obj (INTERNCODE)         
         m12194.obj (INTERNCODE)                  
         cam_module.obj (INTERNCODE)
         wav.obj (INTERNCODE)
         wav_codec.obj (INTERNCODE)
         divider.obj (+RO)
         L1Trc.obj (INTERNCODE)
         uart.obj (INTERNCODE)
         gdi_image_gif.obj (INTERNCODE)
         gdi_bytestream.obj (INTERNCODE)
         gdi_image_direct_gif.obj (INTERNCODE)
         gdi_mutex.obj (INTERNCODE)
         bytecodesasm.obj (INTERNCODE)
         j2me_custom_lcd.obj(INTERNCODE)
         execute.obj (INTERNCODE)
         native.obj (INTERNCODE)
         *rompatch.lib (INTERNCODE)
         file62.o (INTERNCODE)
         file12.o (INTERNCODE)
         file71.o (INTERNCODE) 
         *bchs.lib (BCHS_INTERNCODE)
         *bchsadp.lib (BCHS_INTERNCODE)
         drm_util.obj(INTERNCODE)
         *l1dsm.obj (SNORCODE)
    }
    INTSRAM_DATA 0x4000FF80 0x00008880
    {
; system-realted data
         bootarm.obj (STACK_POOL_INTSRAM)
         isrentry.obj (INTERNCONST, INTERNRW, INTERNZI)
         stack_init.obj (INTERNCONST, INTERNRW, INTERNZI)
         ctrl_buff_pool.obj (INTERNCONST, INTERNRW, INTERNZI)
         stack_ltlcom.obj (INTERNCONST, INTERNRW, INTERNZI)
; Nucleus-related data ; Standard set
         tst*.obj (INTERNCONST, INTERNRW, INTERNZI)
         tct.obj (+RW, +ZI)
         tcd.obj (INTERNCONST, INTERNRW, INTERNZI)
         tmd.obj (+RW, +ZI)
         evd.obj (+RW, +ZI)
         pmd.obj (+RW, +ZI)
         qud.obj (+RW, +ZI)
         smd.obj (+RW, +ZI)
; THREADX-related data ; Standard set
         tx_thread_initialize.obj (+RW, +ZI)
         tx_timer_initialize.obj (+RW, +ZI)
; INTSRAM_DATA_OBJ_others_6227
         mpal_gprs_common_func.obj (INTERNCONST, INTERNRW, INTERNZI)
         mpal_gprs_dl_msg_hdlr.obj (INTERNCONST, INTERNRW, INTERNZI)
         m11194.obj (INTERNCONST, INTERNRW, INTERNZI)
         m11191.obj (INTERNCONST, INTERNRW, INTERNZI)
         l1d_data.obj (INTERNCONST, INTERNRW, INTERNZI)
         l1d_internal_data.obj (INTERNCONST, INTERNRW, INTERNZI)
         m12110.obj (INTERNCONST, INTERNRW, INTERNZI)
         m12120.obj (INTERNCONST, INTERNRW, INTERNZI)
         m12160.obj (INTERNCONST, INTERNRW, INTERNZI)
         m12170.obj (INTERNCONST, INTERNRW, INTERNZI)
         m12168.obj (INTERNCONST, INTERNRW, INTERNZI)
         m12180.obj (INTERNCONST, INTERNRW, INTERNZI)
         m11303.obj (INTERNCONST, INTERNRW, INTERNZI)
         m11305.obj (INTERNCONST, INTERNRW, INTERNZI)
         m12194.obj (INTERNCONST, INTERNRW, INTERNZI)
         L1Trc.obj (INTERNCONST, INTERNRW, INTERNZI)
         gdi_image.obj (INTERNCONST, INTERNRW, INTERNZI)
         gdi_bytestream.obj (INTERNCONST, INTERNRW, INTERNZI)
         gdi.obj (INTERNZI)
         wav.obj (INTERNCONST, INTERNRW, INTERNZI)
         wav_codec.obj (INTERNCONST, INTERNRW, INTERNZI)
         interpret.obj (INTERNZI)
         file71.o (INTERNCONST, INTERNRW, INTERNZI)
         *bchs.lib (BCHS_INTERNZI)
         *bchsadp.lib (BCHS_INTERNZI)
    }
    DYNAMIC_CODE1 0x40018800 OVERLAY 0x5000
    {
         * (AMR515_DYNAMIC_CODE, AMR515_DYNAMIC_ZI)
    }
    DYNAMIC_CODE2 0x40018800 OVERLAY 0x5000
    {
         * (G3D_DYNAMIC_CODE, G3D_DYNAMIC_ZI)
    }
    DYNAMIC_CODE3 0x40018800 OVERLAY 0x5000
    {
         * (CTM_DYNAMIC_CODE, CTM_DYNAMIC_ZI)
    }
    DYNAMIC_CODE4 0x40018800 OVERLAY 0x5000
    {
         * (G729_DYNAMIC_CODE, G729_DYNAMIC_ZI)
    }
    DYNAMIC_CODE5 0x40018800 OVERLAY 0x5000
    {
         * (SBC_DYNAMIC_CODE, SBC_DYNAMIC_ZI)
    }
    DYNAMIC_CODE6 0x40018800 OVERLAY 0x5000
    {
         * (BCODE_DYNAMIC_CODE, BCODE_DYNAMIC_ZI)
    }
    INTSRAM_MULTIMEDIA 0x4001D800 0x00029800
    {
         med_main.obj (INTERNRW1, INTERNZI1)
         isp_comm.obj (INTERNRW1, INTERNZI1)
    }
}