📄 marvell.c
字号:
/* * drivers/net/phy/marvell.c * * Driver for Marvell PHYs * * Author: Andy Fleming * * Copyright (c) 2004 Freescale Semiconductor, Inc. * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the * Free Software Foundation; either version 2 of the License, or (at your * option) any later version. * */#include <linux/config.h>#include <linux/kernel.h>#include <linux/sched.h>#include <linux/string.h>#include <linux/errno.h>#include <linux/unistd.h>#include <linux/slab.h>#include <linux/interrupt.h>#include <linux/init.h>#include <linux/delay.h>#include <linux/netdevice.h>#include <linux/etherdevice.h>#include <linux/skbuff.h>#include <linux/spinlock.h>#include <linux/mm.h>#include <linux/module.h>#include <linux/version.h>#include <linux/mii.h>#include <linux/ethtool.h>#include <linux/phy.h>#include <asm/io.h>#include <asm/irq.h>#include <asm/uaccess.h>#define MII_M1011_IEVENT 0x13#define MII_M1011_IEVENT_CLEAR 0x0000#define MII_M1011_IMASK 0x12#define MII_M1011_IMASK_INIT 0x6400#define MII_M1011_IMASK_CLEAR 0x0000MODULE_DESCRIPTION("Marvell PHY driver");MODULE_AUTHOR("Andy Fleming");MODULE_LICENSE("GPL");static int marvell_ack_interrupt(struct phy_device *phydev){ int err; /* Clear the interrupts by reading the reg */ err = phy_read(phydev, MII_M1011_IEVENT); if (err < 0) return err; return 0;}static int marvell_config_intr(struct phy_device *phydev){ int err; if(phydev->interrupts == PHY_INTERRUPT_ENABLED) err = phy_write(phydev, MII_M1011_IMASK, MII_M1011_IMASK_INIT); else err = phy_write(phydev, MII_M1011_IMASK, MII_M1011_IMASK_CLEAR); return err;}static int marvell_config_aneg(struct phy_device *phydev){ int err; /* The Marvell PHY has an errata which requires * that certain registers get written in order * to restart autonegotiation */ err = phy_write(phydev, MII_BMCR, BMCR_RESET); if (err < 0) return err; err = phy_write(phydev, 0x1d, 0x1f); if (err < 0) return err; err = phy_write(phydev, 0x1e, 0x200c); if (err < 0) return err; err = phy_write(phydev, 0x1d, 0x5); if (err < 0) return err; err = phy_write(phydev, 0x1e, 0); if (err < 0) return err; err = phy_write(phydev, 0x1e, 0x100); if (err < 0) return err; err = genphy_config_aneg(phydev); return err;}static struct phy_driver m88e1101_driver = { .phy_id = 0x01410c00, .phy_id_mask = 0xffffff00, .name = "Marvell 88E1101", .features = PHY_GBIT_FEATURES, .flags = PHY_HAS_INTERRUPT, .config_aneg = &marvell_config_aneg, .read_status = &genphy_read_status, .ack_interrupt = &marvell_ack_interrupt, .config_intr = &marvell_config_intr, .driver = { .owner = THIS_MODULE,},};static int __init marvell_init(void){ return phy_driver_register(&m88e1101_driver);}static void __exit marvell_exit(void){ phy_driver_unregister(&m88e1101_driver);}module_init(marvell_init);module_exit(marvell_exit);
⌨️ 快捷键说明
复制代码
Ctrl + C
搜索代码
Ctrl + F
全屏模式
F11
切换主题
Ctrl + Shift + D
显示快捷键
?
增大字号
Ctrl + =
减小字号
Ctrl + -