irq.c

来自「底层驱动开发」· C语言 代码 · 共 520 行

C
520
字号
/* *  arch/ppc/kernel/irq.c * *  Derived from arch/i386/kernel/irq.c *    Copyright (C) 1992 Linus Torvalds *  Adapted from arch/i386 by Gary Thomas *    Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org) *  Updated and modified by Cort Dougan (cort@cs.nmt.edu) *    Copyright (C) 1996 Cort Dougan *  Adapted for Power Macintosh by Paul Mackerras *    Copyright (C) 1996 Paul Mackerras (paulus@cs.anu.edu.au) *  Amiga/APUS changes by Jesper Skov (jskov@cygnus.co.uk). *  * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License * as published by the Free Software Foundation; either version * 2 of the License, or (at your option) any later version. * * This file contains the code used by various IRQ handling routines: * asking for different IRQ's should be done through these routines * instead of just grabbing them. Thus setups with different IRQ numbers * shouldn't result in any weird surprises, and installing new handlers * should be easier. */#include <linux/errno.h>#include <linux/module.h>#include <linux/threads.h>#include <linux/kernel_stat.h>#include <linux/signal.h>#include <linux/sched.h>#include <linux/ioport.h>#include <linux/interrupt.h>#include <linux/timex.h>#include <linux/config.h>#include <linux/init.h>#include <linux/slab.h>#include <linux/pci.h>#include <linux/delay.h>#include <linux/irq.h>#include <linux/proc_fs.h>#include <linux/random.h>#include <linux/kallsyms.h>#include <linux/profile.h>#include <linux/bitops.h>#include <asm/uaccess.h>#include <asm/system.h>#include <asm/io.h>#include <asm/pgtable.h>#include <asm/irq.h>#include <asm/cache.h>#include <asm/prom.h>#include <asm/ptrace.h>#include <asm/iSeries/ItLpQueue.h>#include <asm/machdep.h>#include <asm/paca.h>#ifdef CONFIG_SMPextern void iSeries_smp_message_recv( struct pt_regs * );#endifextern irq_desc_t irq_desc[NR_IRQS];EXPORT_SYMBOL(irq_desc);int distribute_irqs = 1;int __irq_offset_value;int ppc_spurious_interrupts;u64 ppc64_interrupt_controller;int show_interrupts(struct seq_file *p, void *v){	int i = *(loff_t *) v, j;	struct irqaction * action;	irq_desc_t *desc;	unsigned long flags;	if (i == 0) {		seq_printf(p, "           ");		for (j=0; j<NR_CPUS; j++) {			if (cpu_online(j))				seq_printf(p, "CPU%d       ",j);		}		seq_putc(p, '\n');	}	if (i < NR_IRQS) {		desc = get_irq_desc(i);		spin_lock_irqsave(&desc->lock, flags);		action = desc->action;		if (!action || !action->handler)			goto skip;		seq_printf(p, "%3d: ", i);#ifdef CONFIG_SMP		for (j = 0; j < NR_CPUS; j++) {			if (cpu_online(j))				seq_printf(p, "%10u ", kstat_cpu(j).irqs[i]);		}#else		seq_printf(p, "%10u ", kstat_irqs(i));#endif /* CONFIG_SMP */		if (desc->handler)			seq_printf(p, " %s ", desc->handler->typename );		else			seq_printf(p, "  None      ");		seq_printf(p, "%s", (desc->status & IRQ_LEVEL) ? "Level " : "Edge  ");		seq_printf(p, "    %s",action->name);		for (action=action->next; action; action = action->next)			seq_printf(p, ", %s", action->name);		seq_putc(p, '\n');skip:		spin_unlock_irqrestore(&desc->lock, flags);	} else if (i == NR_IRQS)		seq_printf(p, "BAD: %10u\n", ppc_spurious_interrupts);	return 0;}#ifdef CONFIG_HOTPLUG_CPUvoid fixup_irqs(cpumask_t map){	unsigned int irq;	static int warned;	for_each_irq(irq) {		cpumask_t mask;		if (irq_desc[irq].status & IRQ_PER_CPU)			continue;		cpus_and(mask, irq_affinity[irq], map);		if (any_online_cpu(mask) == NR_CPUS) {			printk("Breaking affinity for irq %i\n", irq);			mask = map;		}		if (irq_desc[irq].handler->set_affinity)			irq_desc[irq].handler->set_affinity(irq, mask);		else if (irq_desc[irq].action && !(warned++))			printk("Cannot set affinity for irq %i\n", irq);	}	local_irq_enable();	mdelay(1);	local_irq_disable();}#endifextern int noirqdebug;/* * Eventually, this should take an array of interrupts and an array size * so it can dispatch multiple interrupts. */void ppc_irq_dispatch_handler(struct pt_regs *regs, int irq){	int status;	struct irqaction *action;	int cpu = smp_processor_id();	irq_desc_t *desc = get_irq_desc(irq);	irqreturn_t action_ret;#ifdef CONFIG_IRQSTACKS	struct thread_info *curtp, *irqtp;#endif	kstat_cpu(cpu).irqs[irq]++;	if (desc->status & IRQ_PER_CPU) {		/* no locking required for CPU-local interrupts: */		ack_irq(irq);		action_ret = handle_IRQ_event(irq, regs, desc->action);		desc->handler->end(irq);		return;	}	spin_lock(&desc->lock);	ack_irq(irq);		/*	   REPLAY is when Linux resends an IRQ that was dropped earlier	   WAITING is used by probe to mark irqs that are being tested	   */	status = desc->status & ~(IRQ_REPLAY | IRQ_WAITING);	status |= IRQ_PENDING; /* we _want_ to handle it */	/*	 * If the IRQ is disabled for whatever reason, we cannot	 * use the action we have.	 */	action = NULL;	if (likely(!(status & (IRQ_DISABLED | IRQ_INPROGRESS)))) {		action = desc->action;		if (!action || !action->handler) {			ppc_spurious_interrupts++;			printk(KERN_DEBUG "Unhandled interrupt %x, disabled\n", irq);			/* We can't call disable_irq here, it would deadlock */			if (!desc->depth)				desc->depth = 1;			desc->status |= IRQ_DISABLED;			/* This is not a real spurrious interrupt, we			 * have to eoi it, so we jump to out			 */			mask_irq(irq);			goto out;		}		status &= ~IRQ_PENDING; /* we commit to handling */		status |= IRQ_INPROGRESS; /* we are handling it */	}	desc->status = status;	/*	 * If there is no IRQ handler or it was disabled, exit early.	   Since we set PENDING, if another processor is handling	   a different instance of this same irq, the other processor	   will take care of it.	 */	if (unlikely(!action))		goto out;	/*	 * Edge triggered interrupts need to remember	 * pending events.	 * This applies to any hw interrupts that allow a second	 * instance of the same irq to arrive while we are in do_IRQ	 * or in the handler. But the code here only handles the _second_	 * instance of the irq, not the third or fourth. So it is mostly	 * useful for irq hardware that does not mask cleanly in an	 * SMP environment.	 */	for (;;) {		spin_unlock(&desc->lock);#ifdef CONFIG_IRQSTACKS		/* Switch to the irq stack to handle this */		curtp = current_thread_info();		irqtp = hardirq_ctx[smp_processor_id()];		if (curtp != irqtp) {			irqtp->task = curtp->task;			irqtp->flags = 0;			action_ret = call_handle_IRQ_event(irq, regs, action, irqtp);			irqtp->task = NULL;			if (irqtp->flags)				set_bits(irqtp->flags, &curtp->flags);		} else#endif			action_ret = handle_IRQ_event(irq, regs, action);		spin_lock(&desc->lock);		if (!noirqdebug)			note_interrupt(irq, desc, action_ret, regs);		if (likely(!(desc->status & IRQ_PENDING)))			break;		desc->status &= ~IRQ_PENDING;	}out:	desc->status &= ~IRQ_INPROGRESS;	/*	 * The ->end() handler has to deal with interrupts which got	 * disabled while the handler was running.	 */	if (desc->handler) {		if (desc->handler->end)			desc->handler->end(irq);		else if (desc->handler->enable)			desc->handler->enable(irq);	}	spin_unlock(&desc->lock);}#ifdef CONFIG_PPC_ISERIESvoid do_IRQ(struct pt_regs *regs){	struct paca_struct *lpaca;	irq_enter();#ifdef CONFIG_DEBUG_STACKOVERFLOW	/* Debugging check for stack overflow: is there less than 2KB free? */	{		long sp;		sp = __get_SP() & (THREAD_SIZE-1);		if (unlikely(sp < (sizeof(struct thread_info) + 2048))) {			printk("do_IRQ: stack overflow: %ld\n",				sp - sizeof(struct thread_info));			dump_stack();		}	}#endif	lpaca = get_paca();#ifdef CONFIG_SMP	if (lpaca->lppaca.int_dword.fields.ipi_cnt) {		lpaca->lppaca.int_dword.fields.ipi_cnt = 0;		iSeries_smp_message_recv(regs);	}#endif /* CONFIG_SMP */	if (hvlpevent_is_pending())		process_hvlpevents(regs);	irq_exit();	if (lpaca->lppaca.int_dword.fields.decr_int) {		lpaca->lppaca.int_dword.fields.decr_int = 0;		/* Signal a fake decrementer interrupt */		timer_interrupt(regs);	}}#else	/* CONFIG_PPC_ISERIES */void do_IRQ(struct pt_regs *regs){	int irq;	irq_enter();#ifdef CONFIG_DEBUG_STACKOVERFLOW	/* Debugging check for stack overflow: is there less than 2KB free? */	{		long sp;		sp = __get_SP() & (THREAD_SIZE-1);		if (unlikely(sp < (sizeof(struct thread_info) + 2048))) {			printk("do_IRQ: stack overflow: %ld\n",				sp - sizeof(struct thread_info));			dump_stack();		}	}#endif	irq = ppc_md.get_irq(regs);	if (irq >= 0)		ppc_irq_dispatch_handler(regs, irq);	else		/* That's not SMP safe ... but who cares ? */		ppc_spurious_interrupts++;	irq_exit();}#endif	/* CONFIG_PPC_ISERIES */void __init init_IRQ(void){	static int once = 0;	if (once)		return;	once++;	ppc_md.init_IRQ();	irq_ctx_init();}#ifndef CONFIG_PPC_ISERIES/* * Virtual IRQ mapping code, used on systems with XICS interrupt controllers. */#define UNDEFINED_IRQ 0xffffffffunsigned int virt_irq_to_real_map[NR_IRQS];/* * Don't use virtual irqs 0, 1, 2 for devices. * The pcnet32 driver considers interrupt numbers < 2 to be invalid, * and 2 is the XICS IPI interrupt. * We limit virtual irqs to 17 less than NR_IRQS so that when we * offset them by 16 (to reserve the first 16 for ISA interrupts) * we don't end up with an interrupt number >= NR_IRQS. */#define MIN_VIRT_IRQ	3#define MAX_VIRT_IRQ	(NR_IRQS - NUM_ISA_INTERRUPTS - 1)#define NR_VIRT_IRQS	(MAX_VIRT_IRQ - MIN_VIRT_IRQ + 1)voidvirt_irq_init(void){	int i;	for (i = 0; i < NR_IRQS; i++)		virt_irq_to_real_map[i] = UNDEFINED_IRQ;}/* Create a mapping for a real_irq if it doesn't already exist. * Return the virtual irq as a convenience. */int virt_irq_create_mapping(unsigned int real_irq){	unsigned int virq, first_virq;	static int warned;	if (ppc64_interrupt_controller == IC_OPEN_PIC)		return real_irq;	/* no mapping for openpic (for now) */	if (ppc64_interrupt_controller == IC_BPA_IIC)		return real_irq;	/* no mapping for iic either */	/* don't map interrupts < MIN_VIRT_IRQ */	if (real_irq < MIN_VIRT_IRQ) {		virt_irq_to_real_map[real_irq] = real_irq;		return real_irq;	}	/* map to a number between MIN_VIRT_IRQ and MAX_VIRT_IRQ */	virq = real_irq;	if (virq > MAX_VIRT_IRQ)		virq = (virq % NR_VIRT_IRQS) + MIN_VIRT_IRQ;	/* search for this number or a free slot */	first_virq = virq;	while (virt_irq_to_real_map[virq] != UNDEFINED_IRQ) {		if (virt_irq_to_real_map[virq] == real_irq)			return virq;		if (++virq > MAX_VIRT_IRQ)			virq = MIN_VIRT_IRQ;		if (virq == first_virq)			goto nospace;	/* oops, no free slots */	}	virt_irq_to_real_map[virq] = real_irq;	return virq; nospace:	if (!warned) {		printk(KERN_CRIT "Interrupt table is full\n");		printk(KERN_CRIT "Increase NR_IRQS (currently %d) "		       "in your kernel sources and rebuild.\n", NR_IRQS);		warned = 1;	}	return NO_IRQ;}/* * In most cases will get a hit on the very first slot checked in the * virt_irq_to_real_map.  Only when there are a large number of * IRQs will this be expensive. */unsigned int real_irq_to_virt_slowpath(unsigned int real_irq){	unsigned int virq;	unsigned int first_virq;	virq = real_irq;	if (virq > MAX_VIRT_IRQ)		virq = (virq % NR_VIRT_IRQS) + MIN_VIRT_IRQ;	first_virq = virq;	do {		if (virt_irq_to_real_map[virq] == real_irq)			return virq;		virq++;		if (virq >= MAX_VIRT_IRQ)			virq = 0;	} while (first_virq != virq);	return NO_IRQ;}#endif /* CONFIG_PPC_ISERIES */#ifdef CONFIG_IRQSTACKSstruct thread_info *softirq_ctx[NR_CPUS];struct thread_info *hardirq_ctx[NR_CPUS];void irq_ctx_init(void){	struct thread_info *tp;	int i;	for_each_cpu(i) {		memset((void *)softirq_ctx[i], 0, THREAD_SIZE);		tp = softirq_ctx[i];		tp->cpu = i;		tp->preempt_count = SOFTIRQ_OFFSET;		memset((void *)hardirq_ctx[i], 0, THREAD_SIZE);		tp = hardirq_ctx[i];		tp->cpu = i;		tp->preempt_count = HARDIRQ_OFFSET;	}}void do_softirq(void){	unsigned long flags;	struct thread_info *curtp, *irqtp;	if (in_interrupt())		return;	local_irq_save(flags);	if (local_softirq_pending()) {		curtp = current_thread_info();		irqtp = softirq_ctx[smp_processor_id()];		irqtp->task = curtp->task;		call_do_softirq(irqtp);		irqtp->task = NULL;	}	local_irq_restore(flags);}EXPORT_SYMBOL(do_softirq);#endif /* CONFIG_IRQSTACKS */static int __init setup_noirqdistrib(char *str){	distribute_irqs = 0;	return 1;}__setup("noirqdistrib", setup_noirqdistrib);

⌨️ 快捷键说明

复制代码Ctrl + C
搜索代码Ctrl + F
全屏模式F11
增大字号Ctrl + =
减小字号Ctrl + -
显示快捷键?