⭐ 欢迎来到虫虫下载站! | 📦 资源下载 📁 资源专辑 ℹ️ 关于我们
⭐ 虫虫下载站

📄 shannon.c

📁 底层驱动开发
💻 C
字号:
/* * linux/arch/arm/mach-sa1100/shannon.c */#include <linux/config.h>#include <linux/init.h>#include <linux/device.h>#include <linux/kernel.h>#include <linux/tty.h>#include <linux/mtd/mtd.h>#include <linux/mtd/partitions.h>#include <asm/hardware.h>#include <asm/mach-types.h>#include <asm/setup.h>#include <asm/mach/arch.h>#include <asm/mach/flash.h>#include <asm/mach/map.h>#include <asm/mach/serial_sa1100.h>#include <asm/arch/mcp.h>#include <asm/arch/shannon.h>#include "generic.h"static struct mtd_partition shannon_partitions[] = {	{		.name		= "BLOB boot loader",		.offset		= 0,		.size		= 0x20000	},	{		.name		= "kernel",		.offset		= MTDPART_OFS_APPEND,		.size		= 0xe0000	},	{ 		.name		= "initrd",		.offset		= MTDPART_OFS_APPEND,			.size		= MTDPART_SIZ_FULL	}};static struct flash_platform_data shannon_flash_data = {	.map_name	= "cfi_probe",	.parts		= shannon_partitions,	.nr_parts	= ARRAY_SIZE(shannon_partitions),};static struct resource shannon_flash_resource = {	.start		= SA1100_CS0_PHYS,	.end		= SA1100_CS0_PHYS + SZ_4M - 1,	.flags		= IORESOURCE_MEM,};static struct mcp_plat_data shannon_mcp_data = {	.mccr0		= MCCR0_ADM,	.sclk_rate	= 11981000,};static void __init shannon_init(void){	sa11x0_set_flash_data(&shannon_flash_data, &shannon_flash_resource, 1);	sa11x0_set_mcp_data(&shannon_mcp_data);}static void __init shannon_map_io(void){	sa1100_map_io();	sa1100_register_uart(0, 3);	sa1100_register_uart(1, 1);	Ser1SDCR0 |= SDCR0_SUS;	GAFR |= (GPIO_UART_TXD | GPIO_UART_RXD);	GPDR |= GPIO_UART_TXD | SHANNON_GPIO_CODEC_RESET;	GPDR &= ~GPIO_UART_RXD;	PPAR |= PPAR_UPR;	/* reset the codec */	GPCR = SHANNON_GPIO_CODEC_RESET;	GPSR = SHANNON_GPIO_CODEC_RESET;}MACHINE_START(SHANNON, "Shannon (AKA: Tuxscreen)")	.phys_ram	= 0xc0000000,	.phys_io	= 0x80000000,	.io_pg_offst	= ((0xf8000000) >> 18) & 0xfffc,	.boot_params	= 0xc0000100,	.map_io		= shannon_map_io,	.init_irq	= sa1100_init_irq,	.timer		= &sa1100_timer,	.init_machine	= shannon_init,MACHINE_END

⌨️ 快捷键说明

复制代码 Ctrl + C
搜索代码 Ctrl + F
全屏模式 F11
切换主题 Ctrl + Shift + D
显示快捷键 ?
增大字号 Ctrl + =
减小字号 Ctrl + -