📄 pluto_servo.pin
字号:
-- Copyright (C) 1991-2006 Altera Corporation
-- Your use of Altera Corporation's design tools, logic functions
-- and other software and tools, and its AMPP partner logic
-- functions, and any output files any of the foregoing
-- (including device programming or simulation files), and any
-- associated documentation or information are expressly subject
-- to the terms and conditions of the Altera Program License
-- Subscription Agreement, Altera MegaCore Function License
-- Agreement, or other applicable license agreement, including,
-- without limitation, that your use is for the sole purpose of
-- programming logic devices manufactured by Altera and sold by
-- Altera or its authorized distributors. Please refer to the
-- applicable agreement for further details.
--
-- This is a Quartus II output file. It is for reporting purposes only, and is
-- not intended for use as a Quartus II input file. This file cannot be used
-- to make Quartus II pin assignments - for instructions on how to make pin
-- assignments, please see Quartus II help.
------------------------------------------------------------------------------
------------------------------------------------------------------------------
-- NC : No Connect. This pin has no internal connection to the device.
-- VCC_INT : Dedicated power pin, which MUST be connected to VCC (2.5V).
-- VCC_IO : Dedicated power pin, which MUST be connected to VCC (Refer to
-- the table below for voltage).
-- GND : Dedicated ground pin, which MUST be connected to GND.
-- GND+ : Unused input. This pin should be connected to GND. It may also
-- be connected to a valid signal on the board (low, high, or
-- toggling) if that signal is required for a different revision
-- of the design.
-- GND* : Unused I/O pin. This pin can either be left unconnected or
-- connected to GND. Connecting this pin to GND will improve the
-- device's immunity to noise.
------------------------------------------------------------------------------
Quartus II Version 6.0 Build 202 06/20/2006 Service Pack 1 SJ Web Edition
CHIP "pluto_servo" ASSIGNED TO AN: EP1K10TC100-3
Pin Name/Usage : Location : Dir. : I/O Standard : Voltage : I/O Bank : User Assignment
-------------------------------------------------------------------------------------------------------------
CONF_DONE : 1 : bidir : : : :
nCEO : 2 : output : : : :
TDO : 3 : output : : : :
VCC_IO : 4 : power : : 3.3V : :
din[3] : 5 : input : LVTTL/LVCMOS : : : Y
GND* : 6 : : : : :
GND* : 7 : : : : :
din[2] : 8 : input : LVTTL/LVCMOS : : : Y
din[4] : 9 : input : LVTTL/LVCMOS : : : Y
din[5] : 10 : input : LVTTL/LVCMOS : : : Y
GND_INT : 11 : gnd : : : :
VCC_INT : 12 : power : : 2.5V : :
din[6] : 13 : input : LVTTL/LVCMOS : : : Y
down[3] : 14 : output : LVTTL/LVCMOS : : : Y
down[2] : 15 : output : LVTTL/LVCMOS : : : Y
din[7] : 16 : input : LVTTL/LVCMOS : : : Y
VCC_IO : 17 : power : : 3.3V : :
GND_INT : 18 : gnd : : : :
din[0] : 19 : input : LVTTL/LVCMOS : : : Y
down[0] : 20 : output : LVTTL/LVCMOS : : : Y
up[0] : 21 : output : LVTTL/LVCMOS : : : Y
up[1] : 22 : output : LVTTL/LVCMOS : : : Y
down[1] : 23 : output : LVTTL/LVCMOS : : : Y
TMS : 24 : input : : : :
nSTATUS : 25 : bidir : : : :
up[2] : 26 : output : LVTTL/LVCMOS : : : Y
up[3] : 27 : output : LVTTL/LVCMOS : : : Y
quadA[0] : 28 : input : LVTTL/LVCMOS : : : Y
quadB[0] : 29 : input : LVTTL/LVCMOS : : : Y
GND* : 30 : : : : :
GND* : 31 : : : : :
GND* : 32 : : : : :
GND* : 33 : : : : :
GND* : 34 : : : : :
VCC_INT : 35 : power : : 2.5V : :
GND_INT : 36 : gnd : : : :
VCC_CKLK : 37 : power : : 2.5V : :
quadZ[0] : 38 : input : LVTTL/LVCMOS : : : Y
quadA[1] : 39 : input : LVTTL/LVCMOS : : : Y
quadB[1] : 40 : input : LVTTL/LVCMOS : : : Y
GND_CKLK : 41 : gnd : : : :
GND_INT : 42 : gnd : : : :
quadZ[1] : 43 : input : LVTTL/LVCMOS : : : Y
VCC_IO : 44 : power : : 3.3V : :
quadA[2] : 45 : input : LVTTL/LVCMOS : : : Y
quadB[2] : 46 : input : LVTTL/LVCMOS : : : Y
quadZ[2] : 47 : input : LVTTL/LVCMOS : : : Y
dout[0] : 48 : output : LVTTL/LVCMOS : : : Y
nConfig : 49 : output : LVTTL/LVCMOS : : : Y
led : 50 : output : LVTTL/LVCMOS : : : Y
nCONFIG : 51 : input : : : :
VCC_INT : 52 : power : : 2.5V : :
MSEL1 : 53 : input : : : :
MSEL0 : 54 : input : : : :
quadA[3] : 55 : input : LVTTL/LVCMOS : : : Y
quadZ[3] : 56 : input : LVTTL/LVCMOS : : : Y
quadB[3] : 57 : input : LVTTL/LVCMOS : : : Y
dout[1] : 58 : output : LVTTL/LVCMOS : : : Y
GND_INT : 59 : gnd : : : :
VCC_INT : 60 : power : : 2.5V : :
dout[2] : 61 : output : LVTTL/LVCMOS : : : Y
dout[3] : 62 : output : LVTTL/LVCMOS : : : Y
dout[4] : 63 : output : LVTTL/LVCMOS : : : Y
dout[5] : 64 : output : LVTTL/LVCMOS : : : Y
dout[6] : 65 : output : LVTTL/LVCMOS : : : Y
GND_INT : 66 : gnd : : : :
VCC_IO : 67 : power : : 3.3V : :
dout[7] : 68 : output : LVTTL/LVCMOS : : : Y
dout[8] : 69 : output : LVTTL/LVCMOS : : : Y
dout[9] : 70 : output : LVTTL/LVCMOS : : : Y
GND* : 71 : : : : :
VCC_INT : 72 : power : : 2.5V : :
TDI : 73 : input : : : :
nCE : 74 : input : : : :
DCLK : 75 : bidir : : : :
DATA0 : 76 : input : : : :
pport_data[0] : 77 : bidir : LVTTL/LVCMOS : : : Y
GND* : 78 : : : : :
pport_data[1] : 79 : bidir : LVTTL/LVCMOS : : : Y
nDataStr : 80 : input : LVTTL/LVCMOS : : : Y
epp_nReset : 81 : input : LVTTL/LVCMOS : : : Y
pport_data[2] : 82 : bidir : LVTTL/LVCMOS : : : Y
VCC_IO : 83 : power : : 3.3V : :
nAddrStr : 84 : input : LVTTL/LVCMOS : : : Y
pport_data[3] : 85 : bidir : LVTTL/LVCMOS : : : Y
pport_data[4] : 86 : bidir : LVTTL/LVCMOS : : : Y
nWait : 87 : output : LVTTL/LVCMOS : : : Y
GND_INT : 88 : gnd : : : :
GND+ : 89 : : : : :
nWrite : 90 : input : LVTTL/LVCMOS : : : Y
clk : 91 : input : LVTTL/LVCMOS : : : Y
VCC_INT : 92 : power : : 2.5V : :
din[1] : 93 : input : LVTTL/LVCMOS : : : Y
pport_data[5] : 94 : bidir : LVTTL/LVCMOS : : : Y
GND_INT : 95 : gnd : : : :
pport_data[6] : 96 : bidir : LVTTL/LVCMOS : : : Y
pport_data[7] : 97 : bidir : LVTTL/LVCMOS : : : Y
GND* : 98 : : : : :
GND* : 99 : : : : :
TCK : 100 : input : : : :
⌨️ 快捷键说明
复制代码
Ctrl + C
搜索代码
Ctrl + F
全屏模式
F11
切换主题
Ctrl + Shift + D
显示快捷键
?
增大字号
Ctrl + =
减小字号
Ctrl + -