quad.v

CNC 的开放码,EMC2 V2.2.8版

//    This is a component of pluto_servo, a PWM servo driver and quadrature
//    counter for emc2
//    Copyright 2006 Jeff Epler <[e-mail]>
//
//    This program is free software; you can redistribute it and/or modify
//    it under the terms of the GNU General Public License as published by
//    the Free Software Foundation; either version 2 of the License, or
//    (at your option) any later version.
//
//    This program is distributed in the hope that it will be useful,
//    but WITHOUT ANY WARRANTY; without even the implied warranty of
//    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
//    GNU General Public License for more details.
//
//    You should have received a copy of the GNU General Public License
//    along with this program; if not, write to the Free Software
//    Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1507  USA

module quad(clk, A, B, Z, zr, out);
parameter W=14;
input clk, A, B, Z, zr;
reg [(W-1):0] c, i; reg zl;
output [2*W:0] out = { zl, i, c };
// reg [(W-1):0] c, i; reg zl;

reg [2:0] Ad, Bd;
reg [2:0] Zc;
always @(posedge clk) Ad <= {Ad[1:0], A};
always @(posedge clk) Bd <= {Bd[1:0], B};

wire good_one = &Zc;
wire good_zero = ~|Zc;
reg last_good;

wire index_pulse = good_one && ! last_good;

wire count_enable = Ad[1] ^ Ad[2] ^ Bd[1] ^ Bd[2];
wire count_direction = Ad[1] ^ Bd[2];

always @(posedge clk)
begin
    if(Z && !good_one) Zc <= Zc + 2'b1;
    else if(!good_zero) Zc <= Zc - 2'b1;
    if(good_one) last_good <= 1;
    else if(good_zero) last_good <= 0;
    if(count_enable)
    begin
	if(count_direction) c <= c + 1'd1;
	else c <= c - 1'd1;
    end 
    if(index_pulse) begin
	i <= c;
	zl <= 1;
    end else if(zr) begin
	zl <= 0;
    end
end
endmodule