rs274ngc_errors.cc

来自「CNC 的开放码,EMC2 V2.2.8版」· CC 代码 · 共 273 行 · 第 1/2 页

/* 111 */ _("Multiple l words on one line"), // read_l
/* 112 */ _("Multiple p words on one line"), // read_p
/* 113 */ _("Multiple q words on one line"), // read_q
/* 114 */ _("Multiple r words on one line"), // read_r
/* 115 */ _("Multiple s words on one line"), // read_s
/* 116 */ _("Multiple t words on one line"), // read_t
/* 117 */ _("Multiple x words on one line"), // read_x
/* 118 */ _("Multiple y words on one line"), // read_y
/* 119 */ _("Multiple z words on one line"), // read_z
/* 120 */ _("Must use g0 or g1 with g53"), // check_g_codes
/* 121 */ _("Negative argument to sqrt"), // execute_unary
/* 122 */ _("Negative d word tool radius index used"), // read_d
/* 123 */ _("Negative f word used"), // read_f
/* 124 */ _("Negative g code used"), // read_g
/* 125 */ _("Negative h word used"), // read_h
/* 126 */ _("Negative l word used"), // read_l
/* 127 */ _("Negative m code used"), // read_m
/* 128 */ _("Negative or zero q value used"), // read_q
/* 129 */ _("Negative p word used"), // read_p
/* 130 */ _("Negative spindle speed used"), // read_s
/* 131 */ _("Negative tool id used"), // read_t
/* 132 */ _("Nested comment found"), // close_and_downcase
/* 133 */ _("No characters found in reading real value"), // read_real_value
/* 134 */ _("No digits found where real number should be"), // read_real_number
/* 135 */ _("Non integer value for integer"), // read_integer_value
/* 136 */ _("Null missing after newline"), // close_and_downcase
/* 137 */ _("Offset index missing"), // convert_tool_length_offset
/* 138 */ _("P value not an integer with g10 l2"), // check_g_codes
/* 139 */ _("P value out of range with g10 l2"), // check_g_codes
/* 140 */ _("P word with no g4 g10 g64 g76 g82 g86 g88 g89"), // check_other_codes
/* 141 */ _("Parameter file out of order"), // Interp::restore_parameters, Interp::save_parameters
/* 142 */ _("Parameter number out of range"), // read_parameter, read_parameter_setting, Interp::restore_parameters, Interp::save_parameters
/* 143 */ _("Q word missing with g83"), // convert_cycle_xy, convert_cycle_yz, convert_cycle_zx
/* 144 */ _("Q word with no g83 or m66"), // check_other_codes
/* 145 */ _("Queue is not empty after probing"), // Interp::read
/* 146 */ _("R clearance plane unspecified in cycle"), // convert_cycle
/* 147 */ _("R i j k words all missing for arc"), // convert_arc
/* 148 */ _("R less than x in cycle in yz plane"), // convert_cycle_yz
/* 149 */ _("R less than y in cycle in xz plane"), // convert_cycle_zx
/* 150 */ _("R less than z in cycle in xy plane"), // convert_cycle_xy
/* 151 */ _("R word with no g code that uses it"), // check_other_codes
/* 152 */ _("Radius to end of arc differs from radius to start"), // arc_data_comp_ijk, arc_data_ijk
/* 153 */ _("Radius too small to reach end point"), // arc_data_comp_r
/* 154 */ _("Required parameter missing"), // Interp::restore_parameters
/* 155 */ _("Selected tool slot number too large"), // convert_tool_select
/* 156 */ _("Slash missing after first atan argument"), // read_atan
/* 157 */ _("Spindle not turning clockwise in g84"), // convert_cycle_g84
/* 158 */ _("Spindle not turning in g86"), // convert_cycle_g86
/* 159 */ _("Spindle not turning in g87"), // convert_cycle_g87
/* 160 */ _("Spindle not turning in g88"), // convert_cycle_g88
/* 161 */ _("Sscanf failed"), // read_integer_unsigned, read_real_number
/* 162 */ _("Start point too close to probe point"), // convert_probe
/* 163 */ _("Too many m codes on line"), // check_m_codes
/* 164 */ _("Tool length offset index too big"), // read_h
/* 165 */ _("Tool max too large"), // Interp::load_tool_table
/* 166 */ _("Tool radius index too big"), // read_d
/* 167 */ _("Tool radius not less than arc radius with comp"), // arc_data_comp_r, convert_arc_comp2
/* 168 */ _("Two g codes used from same modal group"), // read_g
/* 169 */ _("Two m codes used from same modal group"), // read_m
/* 170 */ _("Unable to open file"), // convert_stop, Interp::open, Interp::restore_parameters
/* 171 */ _("Unclosed comment found"), // close_and_downcase
/* 172 */ _("Unclosed expression"), // read_operation
/* 173 */ _("Unknown g code used"), // read_g
/* 174 */ _("Unknown m code used"), // read_m
/* 175 */ _("Unknown operation"), // read_operation
/* 176 */ _("Unknown operation name starting with a"), // read_operation
/* 177 */ _("Unknown operation name starting with m"), // read_operation
/* 178 */ _("Unknown operation name starting with o"), // read_operation
/* 179 */ _("Unknown operation name starting with x"), // read_operation
/* 180 */ _("Unknown word starting with a"), // read_operation_unary
/* 181 */ _("Unknown word starting with c"), // read_operation_unary
/* 182 */ _("Unknown word starting with e"), // read_operation_unary
/* 183 */ _("Unknown word starting with f"), // read_operation_unary
/* 184 */ _("Unknown word starting with l"), // read_operation_unary
/* 185 */ _("Unknown word starting with r"), // read_operation_unary
/* 186 */ _("Unknown word starting with s"), // read_operation_unary
/* 187 */ _("Unknown word starting with t"), // read_operation_unary
/* 188 */ _("Unknown word where unary operation could be"), // read_operation_unary
/* 189 */ _("X and y words missing for arc in xy plane"), // convert_arc
/* 190 */ _("X and z words missing for arc in xz plane"), // convert_arc
/* 191 */ _("X value unspecified in yz plane canned cycle"), // convert_cycle_yz
/* 192 */ _("X, y, z, a, b, c, u, v, and w words all missing with g38.2"), // convert_probe
/* 193 */ _("Y and z words missing for arc in yz plane"), // convert_arc
/* 194 */ _("Y value unspecified in xz plane canned cycle"), // convert_cycle_zx
/* 195 */ _("Z value unspecified in xy plane canned cycle"), // convert_cycle_xy
/* 196 */ _("Zero or negative argument to ln"), // execute_unary
/* 197 */ _("Zero radius arc"), // arc_data_ijk
/* 198 */ _("K word missing with g33/g33.1"), // check_other_codes
/* 199 */ _("F word used with a g33/g33.1"), // check_other_codes
/* 200 */ _("G33 not supported"), // convert_straight
/* 201 */ _("Canned cycles not supported"), // check_other_codes

/* 202 */ _("Unknown operation name starting with e"), // read_operation
/* 203 */ _("Unknown operation name starting with n"), // read_operation
/* 204 */ _("Unknown operation name starting with g"), // read_operation
/* 205 */ _("Unknown operation name starting with l"), // read_operation
/* 206 */ _("Too many subroutine parameters"), // read_o
/* 207 */ _("Too many subroutine levels"), // read_o
/* 208 */ _("Unknown control command in o word"), // read_o
/* 209 */ _("Too many oword labels"), // control_save_offset
/* 210 */ _("Unknown oword number"),  // control_back_to
/* 211 */ _("Nested subroutine definition"), // convert control functions
/* 212 */ _("Not in subroutine definition"), // convert control functions
/* 213 */ _("Return outside of subroutine"), // convert control functions
/* 214 */ _("File not open"), // control back to
/* 215 */ _("Need tool prepared -Txx- for toolchange"), // if M6 is issued without Txx
/* 216 */ _("Cannot change planes with cutter radius compensation on"),
/* 217 */ _("Cutter radius compensation allowed only in XY, XZ planes"),

/* 218 */ _("P word missing with G76"),
/* 219 */ _("I J or K words missing with G76"),
/* 220 */ _("Cannot move rotary axes with G76"),

/* 221 */ _("Multiple e words on one line"),
/* 222 */ _("E word with no G76 or M66 to use it"),

/* 223 */ _("Named parameter not terminated"),
/* 224 */ _("Named parameter not defined"),
/* 225 */ _("Named oword not terminated"),
/* 226 */ _("Named oword not defined"),
/* 227 */ _("Out of memory"),
/* 228 */ _("Place holder for NCE_VARIABLE: should not occur"),

/* 229 */ _("X Y Z A B C J words not allowed with G43.1, G41 R, or G42 R"),
/* 230 */ _("S word missing with G96"),

/* 231 */ _("Queue is not empty after external input"), // Interp::read
/* 232 */ _("Can't select analog input with wait type != immediate return"), // Interp::read
/* 233 */ _("Zero timeout with wait type != immediate return"), // Interp::read
/* 234 */ _("Invalid to select both a digital and an analog input with M66"), // Interp::read
/* 235 */ _("Need to have either a valid P or a valid E word with M66"), // Interp::read

/* 236 */ _("Unknown error"), // dummy
_("The End")};
// *INDENT-ON*