lpm_rom.fit.qmsg

基于Quartus II FPGA/CPLD数字系统设计实例（VHDL源代码文件）

{ "Info" "IFSAC_FSAC_IO_BANK_PIN_GROUP_STATISTICS" "I/O pins that need to be placed that use the same VCCIO and VREF, before I/O pin placement " "Info: Statistics of I/O pins that need to be placed that use the same VCCIO and VREF, before I/O pin placement" { { "Info" "IFSAC_FSAC_SINGLE_IOC_GROUP_STATISTICS" "13 unused 3.30 5 8 0 " "Info: Number of I/O pins in group: 13 (unused VREF, 3.30 VCCIO, 5 input, 8 output, 0 bidirectional)" { { "Info" "IFSAC_FSAC_IO_STDS_IN_IOC_GROUP" "3.3-V LVTTL. " "Info: I/O standards used: 3.3-V LVTTL." {  } {  } 0 0 "I/O standards used: %1!s!" 0 0}  } {  } 0 0 "Number of I/O pins in group: %1!d! (%2!s! VREF, %3!s! VCCIO, %4!d! input, %5!d! output, %6!d! bidirectional)" 0 0}  } {  } 0 0 "Statistics of %1!s!" 0 0}
{ "Info" "IFSAC_FSAC_IO_STATS_BEFORE_AFTER_PLACEMENT" "before " "Info: I/O bank details before I/O pin placement" { { "Info" "IFSAC_FSAC_IO_BANK_PIN_GROUP_STATISTICS" "I/O banks " "Info: Statistics of I/O banks" { { "Info" "IFSAC_FSAC_SINGLE_IO_BANK_STATISTICS" "1 does not use unused 3 14 " "Info: I/O bank number 1 does not use VREF pins and has unused VCCIO pins. 3 total pin(s) used --  14 pins available" {  } {  } 0 0 "I/O bank number %1!s! %2!s! VREF pins and has %3!s! VCCIO pins. %4!d! total pin(s) used --  %5!d! pins available" 0 0} { "Info" "IFSAC_FSAC_SINGLE_IO_BANK_STATISTICS" "2 does not use unused 0 23 " "Info: I/O bank number 2 does not use VREF pins and has unused VCCIO pins. 0 total pin(s) used --  23 pins available" {  } {  } 0 0 "I/O bank number %1!s! %2!s! VREF pins and has %3!s! VCCIO pins. %4!d! total pin(s) used --  %5!d! pins available" 0 0} { "Info" "IFSAC_FSAC_SINGLE_IO_BANK_STATISTICS" "3 does not use unused 1 20 " "Info: I/O bank number 3 does not use VREF pins and has unused VCCIO pins. 1 total pin(s) used --  20 pins available" {  } {  } 0 0 "I/O bank number %1!s! %2!s! VREF pins and has %3!s! VCCIO pins. %4!d! total pin(s) used --  %5!d! pins available" 0 0} { "Info" "IFSAC_FSAC_SINGLE_IO_BANK_STATISTICS" "4 does not use unused 0 24 " "Info: I/O bank number 4 does not use VREF pins and has unused VCCIO pins. 0 total pin(s) used --  24 pins available" {  } {  } 0 0 "I/O bank number %1!s! %2!s! VREF pins and has %3!s! VCCIO pins. %4!d! total pin(s) used --  %5!d! pins available" 0 0}  } {  } 0 0 "Statistics of %1!s!" 0 0}  } {  } 0 0 "I/O bank details %1!s! I/O pin placement" 0 0}
{ "Info" "IFITAPI_FITAPI_VPR_FITTER_PLACEMENT_PREP_START" "" "Info: Fitter placement preparation operations beginning" {  } {  } 0 0 "Fitter placement preparation operations beginning" 0 0}
{ "Info" "IFITAPI_FITAPI_VPR_FITTER_PLACEMENT_PREP_END" "00:00:00 " "Info: Fitter placement preparation operations ending: elapsed time is 00:00:00" {  } {  } 0 0 "Fitter placement preparation operations ending: elapsed time is %1!s!" 0 0}
{ "Info" "IFITAPI_FITAPI_VPR_FITTER_PLACEMENT_START" "" "Info: Fitter placement operations beginning" {  } {  } 0 0 "Fitter placement operations beginning" 0 0}
{ "Info" "IFITAPI_FITAPI_INFO_VPR_PLACEMENT_FINISH" "" "Info: Fitter placement was successful" {  } {  } 0 0 "Fitter placement was successful" 0 0}
{ "Info" "IFITAPI_FITAPI_VPR_FITTER_PLACEMENT_END" "00:00:00 " "Info: Fitter placement operations ending: elapsed time is 00:00:00" {  } {  } 0 0 "Fitter placement operations ending: elapsed time is %1!s!" 0 0}
{ "Info" "ITDB_FULL_ESTIMATED_DATA_PATH_RESULT" "3.641 ns memory memory " "Info: Estimated most critical path is memory to memory delay of 3.641 ns" { { "Info" "ITDB_NODE_DELAY" "IC(0.000 ns) + CELL(0.000 ns) 0.000 ns rom:inst\|altsyncram:altsyncram_component\|altsyncram_h571:auto_generated\|ram_block1a7~porta_address_reg4 1 MEM M4K_X11_Y4 1 " "Info: 1: + IC(0.000 ns) + CELL(0.000 ns) = 0.000 ns; Loc. = M4K_X11_Y4; Fanout = 1; MEM Node = 'rom:inst\|altsyncram:altsyncram_component\|altsyncram_h571:auto_generated\|ram_block1a7~porta_address_reg4'" {  } { { "e:/altera/quartus ii7.0/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "e:/altera/quartus ii7.0/quartus/bin/TimingClosureFloorplan.fld" "" "" { rom:inst|altsyncram:altsyncram_component|altsyncram_h571:auto_generated|ram_block1a7~porta_address_reg4 } "NODE_NAME" } } { "db/altsyncram_h571.tdf" "" { Text "D:/my_eda2/lpm_rom/db/altsyncram_h571.tdf" 183 2 0 } }  } 0 0 "%4!d!: + %1!s! = %2!s!; Loc. = %6!s!; Fanout = %7!d!; %5!s! Node = '%3!s!'" 0 0} { "Info" "ITDB_NODE_DELAY" "IC(0.000 ns) + CELL(3.641 ns) 3.641 ns rom:inst\|altsyncram:altsyncram_component\|altsyncram_h571:auto_generated\|q_a\[7\] 2 MEM M4K_X11_Y4 1 " "Info: 2: + IC(0.000 ns) + CELL(3.641 ns) = 3.641 ns; Loc. = M4K_X11_Y4; Fanout = 1; MEM Node = 'rom:inst\|altsyncram:altsyncram_component\|altsyncram_h571:auto_generated\|q_a\[7\]'" {  } { { "e:/altera/quartus ii7.0/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "e:/altera/quartus ii7.0/quartus/bin/TimingClosureFloorplan.fld" "" "3.641 ns" { rom:inst|altsyncram:altsyncram_component|altsyncram_h571:auto_generated|ram_block1a7~porta_address_reg4 rom:inst|altsyncram:altsyncram_component|altsyncram_h571:auto_generated|q_a[7] } "NODE_NAME" } } { "db/altsyncram_h571.tdf" "" { Text "D:/my_eda2/lpm_rom/db/altsyncram_h571.tdf" 40 2 0 } }  } 0 0 "%4!d!: + %1!s! = %2!s!; Loc. = %6!s!; Fanout = %7!d!; %5!s! Node = '%3!s!'" 0 0} { "Info" "ITDB_TOTAL_CELL_DELAY" "3.641 ns ( 100.00 % ) " "Info: Total cell delay = 3.641 ns ( 100.00 % )" {  } {  } 0 0 "Total cell delay = %1!s! %2!s!" 0 0}  } { { "e:/altera/quartus ii7.0/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "e:/altera/quartus ii7.0/quartus/bin/TimingClosureFloorplan.fld" "" "3.641 ns" { rom:inst|altsyncram:altsyncram_component|altsyncram_h571:auto_generated|ram_block1a7~porta_address_reg4 rom:inst|altsyncram:altsyncram_component|altsyncram_h571:auto_generated|q_a[7] } "NODE_NAME" } }  } 0 0 "Estimated most critical path is %2!s! to %3!s! delay of %1!s!" 0 0}
{ "Info" "IFITAPI_FITAPI_VPR_FITTER_ROUTING_START" "" "Info: Fitter routing operations beginning" {  } {  } 0 0 "Fitter routing operations beginning" 0 0}
{ "Info" "IFITAPI_FITAPI_VPR_PERCENT_ROUTING_RESOURCE_USAGE" "0 0 " "Info: Average interconnect usage is 0% of the available device resources. Peak interconnect usage is 0%" { { "Info" "IFITAPI_FITAPI_VPR_PEAK_ROUTING_REGION" "X0_Y0 X10_Y9 " "Info: The peak interconnect region extends from location X0_Y0 to location X10_Y9" {  } {  } 0 0 "The peak interconnect region extends from location %1!s! to location %2!s!" 0 0}  } {  } 0 0 "Average interconnect usage is %1!d!%% of the available device resources. Peak interconnect usage is %2!d!%%" 0 0}
{ "Info" "IFITAPI_FITAPI_VPR_FITTER_ROUTING_END" "00:00:00 " "Info: Fitter routing operations ending: elapsed time is 00:00:00" {  } {  } 0 0 "Fitter routing operations ending: elapsed time is %1!s!" 0 0}
{ "Info" "IFITAPI_FITAPI_VPR_AUTO_FIT_ENABLED_AND_USED" "" "Info: The Fitter performed an Auto Fit compilation.  Optimizations were skipped to reduce compilation time." { { "Info" "IFITAPI_FITAPI_VPR_AUTO_FIT_ENABLED_AND_USED_FOR_ROUTABILITY" "" "Info: Optimizations that may affect the design's routability were skipped" {  } {  } 0 0 "Optimizations that may affect the design's routability were skipped" 0 0} { "Info" "IFITAPI_FITAPI_VPR_AUTO_FIT_ENABLED_AND_USED_FOR_TIMING" "" "Info: Optimizations that may affect the design's timing were skipped" {  } {  } 0 0 "Optimizations that may affect the design's timing were skipped" 0 0}  } {  } 0 0 "The Fitter performed an Auto Fit compilation.  Optimizations were skipped to reduce compilation time." 0 0}
{ "Info" "IDAT_DAT_STARTED" "" "Info: Started post-fitting delay annotation" {  } {  } 0 0 "Started post-fitting delay annotation" 0 0}
{ "Warning" "WDAT_NO_LOADING_SPECIFIED_ONE_OR_MORE_PINS" "8 " "Warning: Found 8 output pins without output pin load capacitance assignment" { { "Info" "IDAT_NO_LOADING_SPECIFIED_ON_PIN" "q\[7\] 0 " "Info: Pin \"q\[7\]\" has no specified output pin load capacitance -- assuming default load capacitance of 0 pF for timing analysis" {  } {  } 0 0 "Pin \"%1!s!\" has no specified output pin load capacitance -- assuming default load capacitance of %2!d! pF for timing analysis" 0 0} { "Info" "IDAT_NO_LOADING_SPECIFIED_ON_PIN" "q\[6\] 0 " "Info: Pin \"q\[6\]\" has no specified output pin load capacitance -- assuming default load capacitance of 0 pF for timing analysis" {  } {  } 0 0 "Pin \"%1!s!\" has no specified output pin load capacitance -- assuming default load capacitance of %2!d! pF for timing analysis" 0 0} { "Info" "IDAT_NO_LOADING_SPECIFIED_ON_PIN" "q\[5\] 0 " "Info: Pin \"q\[5\]\" has no specified output pin load capacitance -- assuming default load capacitance of 0 pF for timing analysis" {  } {  } 0 0 "Pin \"%1!s!\" has no specified output pin load capacitance -- assuming default load capacitance of %2!d! pF for timing analysis" 0 0} { "Info" "IDAT_NO_LOADING_SPECIFIED_ON_PIN" "q\[4\] 0 " "Info: Pin \"q\[4\]\" has no specified output pin load capacitance -- assuming default load capacitance of 0 pF for timing analysis" {  } {  } 0 0 "Pin \"%1!s!\" has no specified output pin load capacitance -- assuming default load capacitance of %2!d! pF for timing analysis" 0 0} { "Info" "IDAT_NO_LOADING_SPECIFIED_ON_PIN" "q\[3\] 0 " "Info: Pin \"q\[3\]\" has no specified output pin load capacitance -- assuming default load capacitance of 0 pF for timing analysis" {  } {  } 0 0 "Pin \"%1!s!\" has no specified output pin load capacitance -- assuming default load capacitance of %2!d! pF for timing analysis" 0 0} { "Info" "IDAT_NO_LOADING_SPECIFIED_ON_PIN" "q\[2\] 0 " "Info: Pin \"q\[2\]\" has no specified output pin load capacitance -- assuming default load capacitance of 0 pF for timing analysis" {  } {  } 0 0 "Pin \"%1!s!\" has no specified output pin load capacitance -- assuming default load capacitance of %2!d! pF for timing analysis" 0 0} { "Info" "IDAT_NO_LOADING_SPECIFIED_ON_PIN" "q\[1\] 0 " "Info: Pin \"q\[1\]\" has no specified output pin load capacitance -- assuming default load capacitance of 0 pF for timing analysis" {  } {  } 0 0 "Pin \"%1!s!\" has no specified output pin load capacitance -- assuming default load capacitance of %2!d! pF for timing analysis" 0 0} { "Info" "IDAT_NO_LOADING_SPECIFIED_ON_PIN" "q\[0\] 0 " "Info: Pin \"q\[0\]\" has no specified output pin load capacitance -- assuming default load capacitance of 0 pF for timing analysis" {  } {  } 0 0 "Pin \"%1!s!\" has no specified output pin load capacitance -- assuming default load capacitance of %2!d! pF for timing analysis" 0 0}  } {  } 0 0 "Found %1!d! output pins without output pin load capacitance assignment" 0 0}
{ "Info" "IDAT_DAT_COMPLETED" "" "Info: Delay annotation completed successfully" {  } {  } 0 0 "Delay annotation completed successfully" 0 0}
{ "Info" "IFSAC_FSAC_RAM_METASTABILITY_INFO" "" "Info: Design uses memory blocks. Violating setup or hold times of memory block address registers for either read or write operations could cause memory contents to be corrupted. Make sure that all memory block address registers meet the setup and hold time requirements." {  } {  } 0 0 "Design uses memory blocks. Violating setup or hold times of memory block address registers for either read or write operations could cause memory contents to be corrupted. Make sure that all memory block address registers meet the setup and hold time requirements." 0 0}
{ "Warning" "WFIOMGR_RESERVE_ASSIGNMENT_FOR_UNUSED_PINS_IS_DEFAULT" "As output driving ground " "Warning: The Reserve All Unused Pins setting has not been specified, and will default to 'As output driving ground'." {  } {  } 0 0 "The Reserve All Unused Pins setting has not been specified, and will default to '%1!s!'." 0 0}
{ "Info" "IQEXE_ERROR_COUNT" "Fitter 0 s 3 s Quartus II " "Info: Quartus II Fitter was successful. 0 errors, 3 warnings" { { "Info" "IQEXE_END_PEAK_VSIZE_MEMORY" "176 " "Info: Allocated 176 megabytes of memory during processing" {  } {  } 0 0 "Allocated %1!s! megabytes of memory during processing" 0 0} { "Info" "IQEXE_END_BANNER_TIME" "Mon Apr 23 11:01:58 2007 " "Info: Processing ended: Mon Apr 23 11:01:58 2007" {  } {  } 0 0 "Processing ended: %1!s!" 0 0} { "Info" "IQEXE_ELAPSED_TIME" "00:00:09 " "Info: Elapsed time: 00:00:09" {  } {  } 0 0 "Elapsed time: %1!s!" 0 0}  } {  } 0 0 "%6!s! %1!s! was successful. %2!d! error%3!s!, %4!d! warning%5!s!" 0 0}
{ "Info" "IRDB_WROTE_SUPPRESSED_MSGS" "D:/my_eda2/lpm_rom/lpm_rom.fit.smsg " "Info: Generated suppressed messages file D:/my_eda2/lpm_rom/lpm_rom.fit.smsg" {  } {  } 0 0 "Generated suppressed messages file %1!s!" 0 0}