jiao_tong.fit.qmsg

基于Quartus II FPGA/CPLD数字系统设计实例（VHDL源代码文件）

{ "Info" "IQEXE_SEPARATOR" "" "Info: *******************************************************************" {  } {  } 3 0 "*******************************************************************" 0 0}
{ "Info" "IQEXE_START_BANNER_PRODUCT" "Fitter Quartus II " "Info: Running Quartus II Fitter" { { "Info" "IQEXE_START_BANNER_VERSION" "Version 7.0 Build 33 02/05/2007 SJ Full Version " "Info: Version 7.0 Build 33 02/05/2007 SJ Full Version" {  } {  } 0 0 "%1!s!" 0 0} { "Info" "IQEXE_START_BANNER_TIME" "Fri Jun 01 16:22:56 2007 " "Info: Processing started: Fri Jun 01 16:22:56 2007" {  } {  } 0 0 "Processing started: %1!s!" 0 0}  } {  } 4 0 "Running %2!s! %1!s!" 0 0}
{ "Info" "IQEXE_START_BANNER_COMMANDLINE" "quartus_fit --read_settings_files=off --write_settings_files=off jiao_tong -c jiao_tong " "Info: Command: quartus_fit --read_settings_files=off --write_settings_files=off jiao_tong -c jiao_tong" {  } {  } 0 0 "Command: %1!s!" 0 0}
{ "Info" "IMPP_MPP_USER_DEVICE" "jiao_tong EP2C8T144C8 " "Info: Selected device EP2C8T144C8 for design \"jiao_tong\"" {  } {  } 0 0 "Selected device %2!s! for design \"%1!s!\"" 0 0}
{ "Info" "IFITCC_FITCC_INFO_STANDARD_FIT_COMPILATION_ON" "" "Info: Fitter is performing a Standard Fit compilation using maximum Fitter effort to optimize design performance" {  } {  } 0 0 "Fitter is performing a Standard Fit compilation using maximum Fitter effort to optimize design performance" 0 0}
{ "Info" "ITDC_FITTER_TIMING_ENGINE" "Classic " "Info: Fitter is using the Classic Timing Analyzer" {  } {  } 0 0 "Fitter is using the %1!s! Timing Analyzer" 0 0}
{ "Info" "ITAN_TDC_DEFAULT_OPTIMIZATION_GOALS" "" "Info: Timing requirements not specified -- optimizing circuit to achieve the following default global requirements" { { "Info" "ITAN_TDC_ASSUMED_DEFAULT_REQUIREMENT" "fmax 1000 MHz " "Info: Assuming a global fmax requirement of 1000 MHz" {  } {  } 0 0 "Assuming a global %1!s! requirement of %2!s!" 0 0} { "Info" "ITAN_TDC_NO_DEFAULT_REQUIREMENT" "tsu " "Info: Not setting a global tsu requirement" {  } {  } 0 0 "Not setting a global %1!s! requirement" 0 0} { "Info" "ITAN_TDC_NO_DEFAULT_REQUIREMENT" "tco " "Info: Not setting a global tco requirement" {  } {  } 0 0 "Not setting a global %1!s! requirement" 0 0} { "Info" "ITAN_TDC_NO_DEFAULT_REQUIREMENT" "tpd " "Info: Not setting a global tpd requirement" {  } {  } 0 0 "Not setting a global %1!s! requirement" 0 0}  } {  } 0 0 "Timing requirements not specified -- optimizing circuit to achieve the following default global requirements" 0 0}
{ "Info" "IFSAC_FSAC_MIGRATION_NOT_SELECTED" "" "Info: Device migration not selected. If you intend to use device migration later, you may need to change the pin assignments as they may be incompatible with other devices" { { "Info" "IFSAC_FSAC_MIGRATION_NOT_SELECTED_SUB" "EP2C5T144C8 " "Info: Device EP2C5T144C8 is compatible" {  } {  } 2 0 "Device %1!s! is compatible" 0 0} { "Info" "IFSAC_FSAC_MIGRATION_NOT_SELECTED_SUB" "EP2C5T144I8 " "Info: Device EP2C5T144I8 is compatible" {  } {  } 2 0 "Device %1!s! is compatible" 0 0} { "Info" "IFSAC_FSAC_MIGRATION_NOT_SELECTED_SUB" "EP2C8T144I8 " "Info: Device EP2C8T144I8 is compatible" {  } {  } 2 0 "Device %1!s! is compatible" 0 0}  } {  } 2 0 "Device migration not selected. If you intend to use device migration later, you may need to change the pin assignments as they may be incompatible with other devices" 0 0}
{ "Info" "IFIOMGR_RESERVED_PIN_WITH_LOCATION" "3 " "Info: Fitter converted 3 user pins into dedicated programming pins" { { "Info" "IFIOMGR_RESERVED_PIN_WITH_LOCATION_SUB" "~ASDO~ 1 " "Info: Pin ~ASDO~ is reserved at location 1" {  } {  } 0 0 "Pin %1!s! is reserved at location %2!s!" 0 0} { "Info" "IFIOMGR_RESERVED_PIN_WITH_LOCATION_SUB" "~nCSO~ 2 " "Info: Pin ~nCSO~ is reserved at location 2" {  } {  } 0 0 "Pin %1!s! is reserved at location %2!s!" 0 0} { "Info" "IFIOMGR_RESERVED_PIN_WITH_LOCATION_SUB" "~LVDS54p/nCEO~ 76 " "Info: Pin ~LVDS54p/nCEO~ is reserved at location 76" {  } {  } 0 0 "Pin %1!s! is reserved at location %2!s!" 0 0}  } {  } 0 0 "Fitter converted %1!d! user pins into dedicated programming pins" 0 0}
{ "Warning" "WFIOMGR_PINS_MISSING_LOCATION_INFO" "7 17 " "Warning: No exact pin location assignment(s) for 7 pins of 17 total pins" { { "Info" "IFIOMGR_PIN_MISSING_LOCATION_INFO" "seg7\[0\] " "Info: Pin seg7\[0\] not assigned to an exact location on the device" {  } { { "jiao_tong.vhd" "" { Text "D:/my_eda2/jiao_tong/jiao_tong.vhd" 8 -1 0 } } { "e:/altera/70/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "e:/altera/70/quartus/bin/TimingClosureFloorplan.fld" "" "" { seg7[0] } "NODE_NAME" } } { "e:/altera/70/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "e:/altera/70/quartus/bin/TimingClosureFloorplan.fld" "" "" { seg7[0] } "NODE_NAME" } }  } 0 0 "Pin %1!s! not assigned to an exact location on the device" 0 0} { "Info" "IFIOMGR_PIN_MISSING_LOCATION_INFO" "seg7\[1\] " "Info: Pin seg7\[1\] not assigned to an exact location on the device" {  } { { "jiao_tong.vhd" "" { Text "D:/my_eda2/jiao_tong/jiao_tong.vhd" 8 -1 0 } } { "e:/altera/70/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "e:/altera/70/quartus/bin/TimingClosureFloorplan.fld" "" "" { seg7[1] } "NODE_NAME" } } { "e:/altera/70/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "e:/altera/70/quartus/bin/TimingClosureFloorplan.fld" "" "" { seg7[1] } "NODE_NAME" } }  } 0 0 "Pin %1!s! not assigned to an exact location on the device" 0 0} { "Info" "IFIOMGR_PIN_MISSING_LOCATION_INFO" "seg7\[2\] " "Info: Pin seg7\[2\] not assigned to an exact location on the device" {  } { { "jiao_tong.vhd" "" { Text "D:/my_eda2/jiao_tong/jiao_tong.vhd" 8 -1 0 } } { "e:/altera/70/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "e:/altera/70/quartus/bin/TimingClosureFloorplan.fld" "" "" { seg7[2] } "NODE_NAME" } } { "e:/altera/70/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "e:/altera/70/quartus/bin/TimingClosureFloorplan.fld" "" "" { seg7[2] } "NODE_NAME" } }  } 0 0 "Pin %1!s! not assigned to an exact location on the device" 0 0} { "Info" "IFIOMGR_PIN_MISSING_LOCATION_INFO" "seg7\[3\] " "Info: Pin seg7\[3\] not assigned to an exact location on the device" {  } { { "jiao_tong.vhd" "" { Text "D:/my_eda2/jiao_tong/jiao_tong.vhd" 8 -1 0 } } { "e:/altera/70/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "e:/altera/70/quartus/bin/TimingClosureFloorplan.fld" "" "" { seg7[3] } "NODE_NAME" } } { "e:/altera/70/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "e:/altera/70/quartus/bin/TimingClosureFloorplan.fld" "" "" { seg7[3] } "NODE_NAME" } }  } 0 0 "Pin %1!s! not assigned to an exact location on the device" 0 0} { "Info" "IFIOMGR_PIN_MISSING_LOCATION_INFO" "seg7\[4\] " "Info: Pin seg7\[4\] not assigned to an exact location on the device" {  } { { "jiao_tong.vhd" "" { Text "D:/my_eda2/jiao_tong/jiao_tong.vhd" 8 -1 0 } } { "e:/altera/70/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "e:/altera/70/quartus/bin/TimingClosureFloorplan.fld" "" "" { seg7[4] } "NODE_NAME" } } { "e:/altera/70/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "e:/altera/70/quartus/bin/TimingClosureFloorplan.fld" "" "" { seg7[4] } "NODE_NAME" } }  } 0 0 "Pin %1!s! not assigned to an exact location on the device" 0 0} { "Info" "IFIOMGR_PIN_MISSING_LOCATION_INFO" "seg7\[5\] " "Info: Pin seg7\[5\] not assigned to an exact location on the device" {  } { { "jiao_tong.vhd" "" { Text "D:/my_eda2/jiao_tong/jiao_tong.vhd" 8 -1 0 } } { "e:/altera/70/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "e:/altera/70/quartus/bin/TimingClosureFloorplan.fld" "" "" { seg7[5] } "NODE_NAME" } } { "e:/altera/70/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "e:/altera/70/quartus/bin/TimingClosureFloorplan.fld" "" "" { seg7[5] } "NODE_NAME" } }  } 0 0 "Pin %1!s! not assigned to an exact location on the device" 0 0} { "Info" "IFIOMGR_PIN_MISSING_LOCATION_INFO" "seg7\[6\] " "Info: Pin seg7\[6\] not assigned to an exact location on the device" {  } { { "jiao_tong.vhd" "" { Text "D:/my_eda2/jiao_tong/jiao_tong.vhd" 8 -1 0 } } { "e:/altera/70/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "e:/altera/70/quartus/bin/TimingClosureFloorplan.fld" "" "" { seg7[6] } "NODE_NAME" } } { "e:/altera/70/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "e:/altera/70/quartus/bin/TimingClosureFloorplan.fld" "" "" { seg7[6] } "NODE_NAME" } }  } 0 0 "Pin %1!s! not assigned to an exact location on the device" 0 0}  } {  } 0 0 "No exact pin location assignment(s) for %1!d! pins of %2!d! total pins" 0 0}
{ "Info" "IFSAC_FSAC_ASSIGN_AUTO_GLOBAL_TO_SIGNAL" "clk1hz  " "Info: Automatically promoted node clk1hz " { { "Info" "IFSAC_FSAC_ASSIGN_AUTO_GLOBAL_TO_SIGNAL_FANOUTS" "destinations Global Clock " "Info: Automatically promoted destinations to use location or clock signal Global Clock" {  } {  } 0 0 "Automatically promoted %1!s! to use location or clock signal %2!s!" 0 0} { "Info" "IFSAC_FSAC_GLOBAL_UNASSIGNED_FANOUTS" "" "Info: Following destination nodes may be non-global or may not use global or regional clocks" { { "Info" "IFSAC_FSAC_GLOBAL_UNASSIGNED_FANOUTS_SUB" "scan\[0\] " "Info: Destination node scan\[0\]" {  } { { "jiao_tong.vhd" "" { Text "D:/my_eda2/jiao_tong/jiao_tong.vhd" 185 -1 0 } } { "e:/altera/70/quartus/bin/Assignment Editor.qase" "" { Assignment "e:/altera/70/quartus/bin/Assignment Editor.qase" 1 { { 0 "scan\[0\]" } } } } { "e:/altera/70/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "e:/altera/70/quartus/bin/TimingClosureFloorplan.fld" "" "" { scan[0] } "NODE_NAME" } } { "e:/altera/70/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "e:/altera/70/quartus/bin/TimingClosureFloorplan.fld" "" "" { scan[0] } "NODE_NAME" } }  } 0 0 "Destination node %1!s!" 0 0} { "Info" "IFSAC_FSAC_GLOBAL_UNASSIGNED_FANOUTS_SUB" "scan\[1\] " "Info: Destination node scan\[1\]" {  } { { "jiao_tong.vhd" "" { Text "D:/my_eda2/jiao_tong/jiao_tong.vhd" 185 -1 0 } } { "e:/altera/70/quartus/bin/Assignment Editor.qase" "" { Assignment "e:/altera/70/quartus/bin/Assignment Editor.qase" 1 { { 0 "scan\[1\]" } } } } { "e:/altera/70/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "e:/altera/70/quartus/bin/TimingClosureFloorplan.fld" "" "" { scan[1] } "NODE_NAME" } } { "e:/altera/70/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "e:/altera/70/quartus/bin/TimingClosureFloorplan.fld" "" "" { scan[1] } "NODE_NAME" } }  } 0 0 "Destination node %1!s!" 0 0} { "Info" "IFSAC_FSAC_GLOBAL_UNASSIGNED_FANOUTS_SUB" "Mux0~13 " "Info: Destination node Mux0~13" {  } { { "jiao_tong.vhd" "" { Text "D:/my_eda2/jiao_tong/jiao_tong.vhd" 187 -1 0 } } { "e:/altera/70/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "e:/altera/70/quartus/bin/TimingClosureFloorplan.fld" "" "" { Mux0~13 } "NODE_NAME" } } { "e:/altera/70/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "e:/altera/70/quartus/bin/TimingClosureFloorplan.fld" "" "" { Mux0~13 } "NODE_NAME" } }  } 0 0 "Destination node %1!s!" 0 0} { "Info" "IFSAC_FSAC_GLOBAL_UNASSIGNED_FANOUTS_SUB" "Mux11~14 " "Info: Destination node Mux11~14" {  } { { "jiao_tong.vhd" "" { Text "D:/my_eda2/jiao_tong/jiao_tong.vhd" 187 -1 0 } } { "e:/altera/70/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "e:/altera/70/quartus/bin/TimingClosureFloorplan.fld" "" "" { Mux11~14 } "NODE_NAME" } } { "e:/altera/70/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "e:/altera/70/quartus/bin/TimingClosureFloorplan.fld" "" "" { Mux11~14 } "NODE_NAME" } }  } 0 0 "Destination node %1!s!" 0 0} { "Info" "IFSAC_FSAC_GLOBAL_UNASSIGNED_FANOUTS_SUB" "Mux12~14 " "Info: Destination node Mux12~14" {  } { { "jiao_tong.vhd" "" { Text "D:/my_eda2/jiao_tong/jiao_tong.vhd" 187 -1 0 } } { "e:/altera/70/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "e:/altera/70/quartus/bin/TimingClosureFloorplan.fld" "" "" { Mux12~14 } "NODE_NAME" } } { "e:/altera/70/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "e:/altera/70/quartus/bin/TimingClosureFloorplan.fld" "" "" { Mux12~14 } "NODE_NAME" } }  } 0 0 "Destination node %1!s!" 0 0} { "Info" "IFSAC_FSAC_GLOBAL_UNASSIGNED_FANOUTS_SUB" "Mux13~14 " "Info: Destination node Mux13~14" {  } { { "jiao_tong.vhd" "" { Text "D:/my_eda2/jiao_tong/jiao_tong.vhd" 187 -1 0 } } { "e:/altera/70/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "e:/altera/70/quartus/bin/TimingClosureFloorplan.fld" "" "" { Mux13~14 } "NODE_NAME" } } { "e:/altera/70/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "e:/altera/70/quartus/bin/TimingClosureFloorplan.fld" "" "" { Mux13~14 } "NODE_NAME" } }  } 0 0 "Destination node %1!s!" 0 0} { "Info" "IFSAC_FSAC_GLOBAL_UNASSIGNED_FANOUTS_SUB" "seg7~245 " "Info: Destination node seg7~245" {  } { { "jiao_tong.vhd" "" { Text "D:/my_eda2/jiao_tong/jiao_tong.vhd" 8 -1 0 } } { "e:/altera/70/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "e:/altera/70/quartus/bin/TimingClosureFloorplan.fld" "" "" { seg7~245 } "NODE_NAME" } } { "e:/altera/70/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "e:/altera/70/quartus/bin/TimingClosureFloorplan.fld" "" "" { seg7~245 } "NODE_NAME" } }  } 0 0 "Destination node %1!s!" 0 0} { "Info" "IFSAC_FSAC_GLOBAL_UNASSIGNED_FANOUTS_SUB" "seg7~246 " "Info: Destination node seg7~246" {  } { { "jiao_tong.vhd" "" { Text "D:/my_eda2/jiao_tong/jiao_tong.vhd" 8 -1 0 } } { "e:/altera/70/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "e:/altera/70/quartus/bin/TimingClosureFloorplan.fld" "" "" { seg7~246 } "NODE_NAME" } } { "e:/altera/70/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "e:/altera/70/quartus/bin/TimingClosureFloorplan.fld" "" "" { seg7~246 } "NODE_NAME" } }  } 0 0 "Destination node %1!s!" 0 0} { "Info" "IFSAC_FSAC_GLOBAL_UNASSIGNED_FANOUTS_SUB" "seg7~247 " "Info: Destination node seg7~247" {  } { { "jiao_tong.vhd" "" { Text "D:/my_eda2/jiao_tong/jiao_tong.vhd" 8 -1 0 } } { "e:/altera/70/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "e:/altera/70/quartus/bin/TimingClosureFloorplan.fld" "" "" { seg7~247 } "NODE_NAME" } } { "e:/altera/70/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "e:/altera/70/quartus/bin/TimingClosureFloorplan.fld" "" "" { seg7~247 } "NODE_NAME" } }  } 0 0 "Destination node %1!s!" 0 0} { "Info" "IFSAC_FSAC_GLOBAL_UNASSIGNED_FANOUTS_SUB" "seg7~248 " "Info: Destination node seg7~248" {  } { { "jiao_tong.vhd" "" { Text "D:/my_eda2/jiao_tong/jiao_tong.vhd" 8 -1 0 } } { "e:/altera/70/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "e:/altera/70/quartus/bin/TimingClosureFloorplan.fld" "" "" { seg7~248 } "NODE_NAME" } } { "e:/altera/70/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "e:/altera/70/quartus/bin/TimingClosureFloorplan.fld" "" "" { seg7~248 } "NODE_NAME" } }  } 0 0 "Destination node %1!s!" 0 0} { "Info" "IFSAC_FSAC_GLOBAL_UNASSIGNED_FANOUTS_LIMITED_TO_SUB" "10 " "Info: Non-global destination nodes limited to 10 nodes" {  } {  } 0 0 "Non-global destination nodes limited to %1!d! nodes" 0 0}  } {  } 0 0 "Following destination nodes may be non-global or may not use global or regional clocks" 0 0}  } { { "jiao_tong.vhd" "" { Text "D:/my_eda2/jiao_tong/jiao_tong.vhd" 14 -1 0 } } { "e:/altera/70/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "e:/altera/70/quartus/bin/TimingClosureFloorplan.fld" "" "" { clk1hz } "NODE_NAME" } } { "e:/altera/70/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "e:/altera/70/quartus/bin/TimingClosureFloorplan.fld" "" "" { clk1hz } "NODE_NAME" } }  } 0 0 "Automatically promoted node %1!s! %2!s!" 0 0}
{ "Info" "IFSAC_FSAC_REGISTER_PACKING_START_REGPACKING_INFO" "" "Info: Starting register packing" {  } {  } 0 0 "Starting register packing" 0 0}
{ "Extra Info" "IFSAC_FSAC_START_REG_LOCATION_PROCESSING" "" "Extra Info: Performing register packing on registers with non-logic cell location assignments" {  } {  } 1 0 "Performing register packing on registers with non-logic cell location assignments" 1 0}