readme.txt

matlab的FDC工具箱

FDC 1.4 beta 3                              Revision date: September 15, 2005
==============



  #########################################################################
  ##                                                                     ##
  ##   IMPORTANT: Before installing the FDC toolbox, please read the     ##
  ##              copyright information in copying.txt and license.txt!  ##
  ##                                                                     ##
  #########################################################################




                  FDC 1.4 --- A Simulink Toolbox for Flight
                        Dynamics and Control Analysis

                                 M.O. Rauw
                            ([e-mail])


                  Haarlem, The Netherlands, September 2005


  ABSTRACT
  ========
  The Flight Dynamics and Control (FDC) toolbox is a graphical software
  environment for the design and analysis of aircraft dynamics and control
  systems, based upon Matlab and Simulink. It simplifies the Flight Control
  System design process by integrating linear and non-linear analysis within
  one software environment. The toolbox has been set up around a general
  non-linear aircraft model which has been constructed in a modular way,
  thus providing maximal flexibility to the user. The aircraft model can be
  accessed by means of the graphical user-interface of Simulink. The toolbox
  also includes some analytical Matlab routines for extracting steady-state
  flight conditions and determining linearized models for user-specified
  operating points, Simulink models of atmospheric disturbances and
  radio-navigation systems, extensive models of a `classical' autopilot,
  and several help-utilities which simplify the handling of the systems and
  tools.

  Keywords: Flight Control System Design, Aircraft Modeling, Non-linear
            Simulation, Computer Assisted Design



  ABOUT THE CURRENT FDC DISTRIBUTION PACKAGE
  ==========================================
  This is the third beta version of FDC 1.4. Compared to the earlier beta's,
  it incorporates some minor bug fixes and UI changes in the analytical tools.
  FDC 1.4 has been designed for Matlab 5.3 / Simulink 3.0 (i.e. Matlab R11) or 
  newer. This version of the toolbox has been released under the terms of the 
  Open Software License, see copying.txt and license.txt for more information.
  
  A user-manual for the FDC toolbox can be downloaded in PDF-format via the
  FDC homepage. FDC 1.4 also includes HTML-based help-texts, which will help 
  to get you started. This HTML help facility should work correctly if you are 
  able to access the 'Matlab Help Desk' from within the Matlab environment on
  your computer.

  Older versions of the FDC toolbox are FDC 1.3, which is compatible with
  Matlab 5.1 / Simulink 2.1 and newer, and FDC 1.2, which is compatible with
  Matlab 4.2 / Simulink 1.3. Both versions are still available via the FDC
  website (see below).


  Installing the FDC toolbox
  ==========================
  Note: the path-notations in this section are given in MS-Windows format.
  Replace this by the appropriate format for other operating systems.

  The following instructions will guide you through the installation and
  initialization process (these instructions can also be found in chapter 7
  of the FDC 1.4 user-manual, which also includes screenshots to illustrate
  this process):

  1. Copy the archive file FDC14.ZIP into a temporary directory.

  2. Create a suitable destination directory for the FDC toolbox. The
     recommended location is a subdirectory FDC14 within the TOOLBOX
     directory of MATLAB but any other dedicated directory would do fine as
     well. For example, if MATLAB itself has been installed into C:\MATLAB,
     the recommended destination directory for the FDC toolbox would be
     C:\MATLAB\TOOLBOX\FDC14, but if you prefer something like
     K:\MYTOOLS\FDC14 that抯 fine also.

  3. Unpack FDC14.ZIP into this destination directory. Be sure to retain
     the FDC directory structure when unpacking. (If you use the MS-DOS
     based PKUNZIP utility, this is achieved by using the -d option on the
     pkunzip command-line; newer unpack routines, such as WINZIP or 7ZIP,
     will normally retain the directory structure by default.)

     NOTE: the total size of the extracted FDC files is approximately
     2.4 Mbytes, but up to twice that amount of disk space may be required,
     depending on the file-system in use.

  4. At this stage, it is recommended to read the documentation in the FDC
     subdirectory DOC. Apart from this README.TXT file, which may contain
     important last-minute information, check out COPYING.TXT and LICENSE.TXT
     for the terms of use. Other documentation files are CHANGELOG.TXT, which
     describes the major changes in the last few FDC versions, ROADMAP.TXT,
     which outlines past FDC developments and future plans, and CONTENTS.TXT,
     which contains a complete list of FDC files.

  5. Start MATLAB version 5.3 or later and use the command cd or chdir to go
     to the FDC directory specified above (from now on denoted as 'FDC root-
     directory'). This has been illustrated in figure 7.1, where it is assumed
     that the FDC toolbox has been installed into the directory
     K:\MYTOOLS\FDC14.

  6. Type fdc at the command-line to run the FDC initialization routine. A
     splash-screen will appear, to signal that the toolbox is being started;
     click on the splash screen with the mouse pointer, or press any key to
     continue (the splash screen will disappear).

  7. The toolbox will now be initialized by appanding the FDC subdirectories
     to the MATLAB-path. The default FDC search-path will be displayed, and
     the initialization routine will ask: Path ok? (y=yes, n=no, s=suppress
     this message in the future). If you have followed the above instructions,
     it is normally sufficient to verify the location of the FDC root-
     directory; the option to change subdirectory names is meant to
     accommodate possible future additions to the toolbox.

  8. If the displayed path differs from the actual location of the FDC
     directories, answer this question with n. The initialization routine will
     direct you to a menu from where you can change the root-directory, change
     or delete the subdirectories, or add newsubdirectories to the toolbox.
     Select 'ready' to return to the directory-check window from step 7.

  9. If the FDC path is correct, you can leave the directory-check window by
     answering with y. Or if you want to suppress this directory-check (and
     the directory editing features) for all future FDC sessions, answer with
     s instead. If this latter option is selected, the initialization routine
     will ask for confirmation.

 10. Next, a welcome message will be shown to signal that the toolbox has been
     initialized. The FDC directories have now been appended to the MATLAB
     path, so all FDC programs and models can now be opened directly from the
     command line, regardless of the current working directory. The main FDC
     library can be accessed by typing fdclib, while the on-line helpfiles for
     FDC 1.4 can be shown in a webbrowser or the MATLAB help browser by typing
     browse fdc.

     In addition, the FDC directories will be appended to the
     bottom of the list in the MATLAB help window, which can be opened by
     typing helpwin. Double-clicking those directories will reveal a brief
     overview of their contents. (The same information can be opened directly
     from the MATLAB command line by typing help <dirname>, where <dirname> is
     the name of the FDC rootdirectory or subdirectory.)

  Notice that the FDC directories will not be appended to the MATLAB path
  permanently. After closing MATLAB it will be necessary to repeat steps 5 to
  10 from the above list again: start MATLAB, change to the FDC root-
  directory, type fdc at the command-line, and verify the directory structure.
  This last step can be skipped for future FDC sessions by choosing the
  憇uppress