ms20_2.m

《数字信号处理实验(MATLAB版)》这

%脉冲响应不变法设计数字带通
%数字滤波器指标
wp1=0.3*pi;wp2=0.7*pi;  %数字滤波器的通带截止频率
ws1=0.1*pi;ws2=0.9*pi;  %数字滤波器的阻带截止频率
Rp=1;As=15;             %输入滤波器的通阻带衰减指标
ripple=10^(-Rp/20);
Attn=10^(-As/20);
%转换为模拟滤波器指标
Fs=2000;T=1/Fs;
Omgp1=wp1*Fs;Omgp2=wp2*Fs;%模拟滤波器的通带截止频率
Omgp=[Omgp1,Omgp2];
Omgs1=ws1*Fs;Omgs2=ws2*Fs;%模拟滤波器的阻带截止频率
Omgs=[Omgs1,Omgs2];
bw=Omgp2-Omgp1;w0=sqrt(Omgp1*Omgp2);%模拟通带带宽和中心频率
%模拟原型滤波器计算
[n,Omgn]=cheb1ord(Omgp,Omgs,Rp,As,'s') %计算阶数n和截止频率
[z0,p0,k0]=cheb1ap(n,Rp); %设计归一化的模拟原型滤波器
ba1=k0*real(poly(z0));        %求原型滤波器系数b
aa1=real(poly(p0));           %求原型滤波器系数a
[ba,aa]=lp2bp(ba1,aa1,w0,bw)  %变换为模拟带通滤波器
%用脉冲响应不变法计算数字滤波器系数
[bd,ad]=impinvar(ba,aa,Fs)
[C,B,A]=dir2par(bd,ad)  %将直接型变换为并联型
%求数字系统的频率特性
[H,w]=freqz(bd,ad);   
dbH=20*log10(abs(H)/max(abs(H))); %化为分贝值
%
subplot(2,2,1),plot(w/pi,abs(H)); 
ylabel('幅度');xlabel('频率/\pi');axis([0,1,0,1.1]);
set(gca,'XTickMode','manual','XTick',[0.1,0.3,0.7,0.9]);
set(gca,'YTickMode','manual','YTick',[0,Attn,ripple,1]);grid
subplot(2,2,2),plot(w/pi,angle(H)/pi);
ylabel('相位');xlabel('频率/\pi');axis([0,1,-1,1]);
set(gca,'XTickMode','manual','XTick',[0.1,0.3,0.7,0.9]);
set(gca,'YTickMode','manual','YTick',[-1,0,1]);grid
subplot(2,2,3),plot(w/pi,dbH); 
ylabel('幅度(dB)');xlabel('频率/\pi');axis([0,1,-40,5]);
set(gca,'XTickMode','manual','XTick',[0.1,0.3,0.7,0.9]);
set(gca,'YTickMode','manual','YTick',[-50,-15,-1,0]);grid
subplot(2,2,4),zplane(bd,ad);
axis([-1.1,1.1,-1.1,1.1]);ylabel('零极图');