sense.c

开源备份软件源码 AMANDA, the Advanced Maryland Automatic Network Disk Archiver, is a backup system that a

	{ "EXB-10e", "", TYPE_CHANGER, SENSE_UNIT_ATTENTION , UCHAR_MAX, UCHAR_MAX, SENSE_RETRY, T_("Default for SENSE_UNIT_ATTENTION")},

	{ "EXB-10e", "", TYPE_CHANGER, SENSE_ILLEGAL_REQUEST, 0x0, 0x0, SENSE_ABORT, T_("Illegal Request")},
	{ "EXB-10e", "", TYPE_CHANGER, SENSE_ILLEGAL_REQUEST, 0x91, 0x0, SENSE_CHM_FULL, T_("CHM full during reset")},
	{ "EXB-10e", "", TYPE_CHANGER, SENSE_ILLEGAL_REQUEST , UCHAR_MAX, UCHAR_MAX, SENSE_RETRY, T_("Default for SENSE_ILLEGAL_REQUEST")},

	{ "EXB-10e", "", TYPE_CHANGER,  SENSE_CHG_ELEMENT_STATUS, UCHAR_MAX, UCHAR_MAX, SENSE_IGNORE, T_("Default for SENSE_CHG_ELEMENT_STATUS")},

	{ "EXB-10e", "", TYPE_CHANGER, UCHAR_MAX, 0x0, 0x0, SENSE_ABORT, T_("Nothing Found for EXB-10e")},

/*
 * Exabyte 210 Library (Robot)
 */
	{ "EXB-210", "", TYPE_CHANGER, SENSE_NULL, 0x0, 0x0, SENSE_RETRY, T_("Retry, no sense")},
	{ "EXB-210", "", TYPE_CHANGER, SENSE_NULL, 0x90, 0x2, SENSE_ABORT, T_("Illegal Request")},
	{ "EXB-210", "", TYPE_CHANGER, SENSE_NULL , 0x90, 0x3, SENSE_IES, T_("IES")},
	{ "EXB-210", "", TYPE_CHANGER, SENSE_NULL , UCHAR_MAX, UCHAR_MAX, SENSE_RETRY, T_("Default for SENSE_NULL")},

	{ "EXB-210", "", TYPE_CHANGER, SENSE_NOT_READY, 0x4, 0x0, SENSE_RETRY, T_("Logical Unit not ready, no additional sense")},
	{ "EXB-210", "", TYPE_CHANGER, SENSE_NOT_READY, 0x4, 0x1, SENSE_RETRY, T_("Logical Unit not ready, in progress becoming ready")},
	{ "EXB-210", "", TYPE_CHANGER, SENSE_NOT_READY, 0x4, 0x85, SENSE_ABORT, T_("Library door is open")},
	{ "EXB-210", "", TYPE_CHANGER, SENSE_NOT_READY, 0x4, 0x85, SENSE_ABORT, T_("The data cartridge magazine is missing")},
	{ "EXB-210", "", TYPE_CHANGER, SENSE_NOT_READY, 0x4, 0x89, SENSE_ABORT, T_("The library is in CHS Monitor mode")},
	{ "EXB-210", "", TYPE_CHANGER, SENSE_NOT_READY, 0x4, 0x8C, SENSE_RETRY, T_("The library is performing a power-on self test")},
	{ "EXB-210", "", TYPE_CHANGER, SENSE_NOT_READY, 0x4, 0x8D, SENSE_ABORT, T_("The library is in LCD mode")},
	{ "EXB-210", "", TYPE_CHANGER, SENSE_NOT_READY, 0x4, 0x8E, SENSE_ABORT, T_("The library is in Sequential mode")},
	{ "EXB-210", "", TYPE_CHANGER, SENSE_NOT_READY, 0x30, 0x3, SENSE_RETRY, T_("The tape drive is being cleaned")},
	{ "EXB-210", "", TYPE_CHANGER, SENSE_NOT_READY, 0x3A, 0x0, SENSE_TAPE_NOT_ONLINE, T_("No Tape online")},
	{ "EXB-210", "", TYPE_CHANGER, SENSE_NOT_READY , UCHAR_MAX, UCHAR_MAX, SENSE_RETRY, T_("Default for SENSE_NOT_READY")},
	{ "EXB-210", "", TYPE_CHANGER, SENSE_NOT_READY , UCHAR_MAX, UCHAR_MAX, SENSE_RETRY, T_("Default for SENSE_NOT_READY")},

	{ "EXB-210", "", TYPE_CHANGER, SENSE_UNIT_ATTENTION, 0x0, 0x0, SENSE_RETRY, T_("Unit Attention")},
	{ "EXB-210", "", TYPE_CHANGER, SENSE_UNIT_ATTENTION , UCHAR_MAX, UCHAR_MAX, SENSE_RETRY, T_("Default for SENSE_UNIT_ATTENTION")},

	{ "EXB-210", "", TYPE_CHANGER, SENSE_ILLEGAL_REQUEST, 0x0, 0x0, SENSE_ABORT, T_("Illegal Request")},
	{ "EXB-210", "", TYPE_CHANGER, SENSE_ILLEGAL_REQUEST, 0x91, 0x0, SENSE_CHM_FULL, T_("CHM full during reset")},
	{ "EXB-210", "", TYPE_CHANGER, SENSE_ILLEGAL_REQUEST, 0x21, 0x01, SENSE_ABORT, T_("Invalid element address")},
	{ "EXB-210", "", TYPE_CHANGER, SENSE_ILLEGAL_REQUEST, 0x24, 0x00, SENSE_ABORT, T_("Invalid Invert Field")},
	{ "EXB-210", "", TYPE_CHANGER, SENSE_ILLEGAL_REQUEST, 0x3b, 0x0d, SENSE_ABORT, T_("Destination element occupied")},
	{ "EXB-210", "", TYPE_CHANGER, SENSE_ILLEGAL_REQUEST, 0x3b, 0x0e, SENSE_ABORT, T_("Source Element empty")},
	{ "EXB-210", "", TYPE_CHANGER, SENSE_ILLEGAL_REQUEST, 0x3b, 0x87, SENSE_ABORT, T_("Cartridge stuck in tape")},
	{ "EXB-210", "", TYPE_CHANGER, SENSE_ILLEGAL_REQUEST, 0x3b, 0x90, SENSE_ABORT, T_("Source cart is loaded inside the tape drive and not accessible")},
	{ "EXB-210", "", TYPE_CHANGER, SENSE_ILLEGAL_REQUEST, 0x80, 0x03, SENSE_ABORT, T_("Source magazine not installed")},
	{ "EXB-210", "", TYPE_CHANGER, SENSE_ILLEGAL_REQUEST, 0x80, 0x04, SENSE_ABORT, T_("Destination magazine no installed")},
	{ "EXB-210", "", TYPE_CHANGER, SENSE_ILLEGAL_REQUEST, 0x80, 0x05, SENSE_ABORT, T_("Source tape drive not installed")},
	{ "EXB-210", "", TYPE_CHANGER, SENSE_ILLEGAL_REQUEST, 0x80, 0x06, SENSE_ABORT, T_("Destination tape drive not installed")},

	{ "EXB-210", "", TYPE_CHANGER, SENSE_ILLEGAL_REQUEST , UCHAR_MAX, UCHAR_MAX, SENSE_RETRY, T_("Default for SENSE_ILLEGAL_REQUEST")},

	{ "EXB-210", "", TYPE_CHANGER,  SENSE_CHG_ELEMENT_STATUS, 0x83, 0x0, SENSE_IES, T_("Label questionable")},
	{ "EXB-210", "", TYPE_CHANGER,  SENSE_CHG_ELEMENT_STATUS, 0x83, 0x1, SENSE_IGNORE, T_("Cannot read bar code label")},
	{ "EXB-210", "", TYPE_CHANGER,  SENSE_CHG_ELEMENT_STATUS, 0x83, 0x2, SENSE_ABORT, T_("Cartzridge magazine not present")},
	{ "EXB-210", "", TYPE_CHANGER,  SENSE_CHG_ELEMENT_STATUS, 0x83, 0x3, SENSE_IES, T_("Label and full status questionable")},
       	{ "EXB-210", "", TYPE_CHANGER,  SENSE_CHG_ELEMENT_STATUS, 0x83, 0x4, SENSE_ABORT, T_("Tape drive not installed")},
	{ "EXB-210", "", TYPE_CHANGER,  SENSE_CHG_ELEMENT_STATUS, 0x83, 0x7, SENSE_IES, T_("Full status questionable")},
	{ "EXB-210", "", TYPE_CHANGER,  SENSE_CHG_ELEMENT_STATUS, 0x83, 0x8, SENSE_IGNORE, T_("Bar code label upside down")},
	{ "EXB-210", "", TYPE_CHANGER,  SENSE_CHG_ELEMENT_STATUS, 0x83, 0x9, SENSE_IGNORE, T_("No bar code label")},
	{ "EXB-210", "", TYPE_CHANGER,  SENSE_CHG_ELEMENT_STATUS, 0x83, 0xa, SENSE_IGNORE, T_("Ignore")},
	{ "EXB-210", "", TYPE_CHANGER,  SENSE_CHG_ELEMENT_STATUS, UCHAR_MAX, UCHAR_MAX, SENSE_IGNORE, T_("Default for SENSE_CHG_ELEMENT_STATUS")},

	{ "EXB-210", "", TYPE_CHANGER, UCHAR_MAX, 0x0, 0x0, SENSE_ABORT, T_("Nothing Found for EXB-10e")},

/*
 * Exabyte 230D Library (Robot)
 */
	{ "EXB-230D", "", TYPE_CHANGER, SENSE_NULL, 0x0, 0x0, SENSE_RETRY, T_("Retry, no sense")},
	{ "EXB-230D", "", TYPE_CHANGER, SENSE_NULL, 0x90, 0x2, SENSE_ABORT, T_("Illegal Request")},
	{ "EXB-230D", "", TYPE_CHANGER, SENSE_NULL , 0x90, 0x3, SENSE_IES, T_("IES")},
	{ "EXB-230D", "", TYPE_CHANGER, SENSE_NULL , UCHAR_MAX, UCHAR_MAX, SENSE_RETRY, T_("Default for SENSE_NULL")},

	{ "EXB-230D", "", TYPE_CHANGER, SENSE_NOT_READY, 0x4, 0x0, SENSE_RETRY, T_("Logical Unit not ready, no additional sense")},
	{ "EXB-230D", "", TYPE_CHANGER, SENSE_NOT_READY, 0x4, 0x1, SENSE_RETRY, T_("Logical Unit not ready, in progress becoming ready")},
	{ "EXB-230D", "", TYPE_CHANGER, SENSE_NOT_READY, 0x4, 0x85, SENSE_ABORT, T_("Library door is open")},
	{ "EXB-230D", "", TYPE_CHANGER, SENSE_NOT_READY, 0x4, 0x85, SENSE_ABORT, T_("The data cartridge magazine is missing")},
	{ "EXB-230D", "", TYPE_CHANGER, SENSE_NOT_READY, 0x4, 0x89, SENSE_ABORT, T_("The library is in CHS Monitor mode")},
	{ "EXB-230D", "", TYPE_CHANGER, SENSE_NOT_READY, 0x4, 0x8C, SENSE_RETRY, T_("The library is performing a power-on self test")},
	{ "EXB-230D", "", TYPE_CHANGER, SENSE_NOT_READY, 0x4, 0x8D, SENSE_ABORT, T_("The library is in LCD mode")},
	{ "EXB-230D", "", TYPE_CHANGER, SENSE_NOT_READY, 0x4, 0x8E, SENSE_ABORT, T_("The library is in Sequential mode")},
	{ "EXB-230D", "", TYPE_CHANGER, SENSE_NOT_READY, 0x30, 0x3, SENSE_RETRY, T_("The tape drive is being cleaned")},
	{ "EXB-230D", "", TYPE_CHANGER, SENSE_NOT_READY, 0x3A, 0x0, SENSE_TAPE_NOT_ONLINE, T_("No Tape online")},
	{ "EXB-230D", "", TYPE_CHANGER, SENSE_NOT_READY , UCHAR_MAX, UCHAR_MAX, SENSE_RETRY, T_("Default for SENSE_NOT_READY")},
	{ "EXB-230D", "", TYPE_CHANGER, SENSE_NOT_READY , UCHAR_MAX, UCHAR_MAX, SENSE_RETRY, T_("Default for SENSE_NOT_READY")},

	{ "EXB-230D", "", TYPE_CHANGER, SENSE_UNIT_ATTENTION, 0x0, 0x0, SENSE_RETRY, T_("Unit Attention")},
	{ "EXB-230D", "", TYPE_CHANGER, SENSE_UNIT_ATTENTION , UCHAR_MAX, UCHAR_MAX, SENSE_RETRY, T_("Default for SENSE_UNIT_ATTENTION")},

	{ "EXB-230D", "", TYPE_CHANGER, SENSE_ILLEGAL_REQUEST, 0x0, 0x0, SENSE_ABORT, T_("Illegal Request")},
	{ "EXB-230D", "", TYPE_CHANGER, SENSE_ILLEGAL_REQUEST, 0x91, 0x0, SENSE_CHM_FULL, T_("CHM full during reset")},
	{ "EXB-230D", "", TYPE_CHANGER, SENSE_ILLEGAL_REQUEST , UCHAR_MAX, UCHAR_MAX, SENSE_RETRY, T_("Default for SENSE_ILLEGAL_REQUEST")},

	{ "EXB-230D", "", TYPE_CHANGER,  SENSE_CHG_ELEMENT_STATUS, UCHAR_MAX, UCHAR_MAX, SENSE_IGNORE, T_("Default for SENSE_CHG_ELEMENT_STATUS")},

	{ "EXB-230D", "", TYPE_CHANGER, UCHAR_MAX, 0x0, 0x0, SENSE_ABORT, T_("Nothing Found for EXB-10e")},
/*
 * Spectra TreeFrog  library
 */
 	{ "215", "SPECTRA", TYPE_CHANGER, SENSE_NULL, 0x0, 0x0, SENSE_NO, T_("No Sense, Unit Ready")},
	{ "215", "SPECTRA", TYPE_CHANGER, SENSE_NULL, UCHAR_MAX, UCHAR_MAX, SENSE_NO, T_("No Sense, Unit Ready")},

	{ "215", "SPECTRA", TYPE_CHANGER, SENSE_NOT_READY, 0x4, 0x0, SENSE_RETRY, T_("Unit Not Ready")},
	{ "215", "SPECTRA", TYPE_CHANGER, SENSE_NOT_READY, 0x4, 0x1, SENSE_RETRY, T_("Unit is Becoming Ready")},
	{ "215", "SPECTRA", TYPE_CHANGER, SENSE_NOT_READY, 0x4, 0x83, SENSE_ABORT, T_("Door is open, Robot is Disabled")},
	{ "215", "SPECTRA", TYPE_CHANGER, SENSE_NOT_READY, UCHAR_MAX, UCHAR_MAX, SENSE_RETRY, T_("Default for SENSE_NOT_READY")},

	{ "215", "SPECTRA", TYPE_CHANGER, SENSE_HARDWARE_ERROR, 0x4C, 0x0, SENSE_ABORT, T_("Unit Failed Initialization")},
	{ "215", "SPECTRA", TYPE_CHANGER, SENSE_HARDWARE_ERROR, 0x84, 0x4, SENSE_ABORT, T_("DRAM Memory Failure")},
	{ "215", "SPECTRA", TYPE_CHANGER, SENSE_HARDWARE_ERROR, 0x84, 0x4, SENSE_ABORT, T_("Two ore More SCSI ID's in the library are tehe same")},
	{ "215", "SPECTRA", TYPE_CHANGER, SENSE_HARDWARE_ERROR, 0x81, 0x4, SENSE_ABORT, T_("Tape may be broken;of tape is a cleaning tape;or Drive B is broken")},
	{ "215", "SPECTRA", TYPE_CHANGER, SENSE_HARDWARE_ERROR, 0x87, 0x0, SENSE_ABORT, T_("Bad FPROM or invalid device in socket")},
	{ "215", "SPECTRA", TYPE_CHANGER, SENSE_HARDWARE_ERROR, 0x87, 0x1, SENSE_ABORT, T_("FPROM Erase Operation Failed")},
	{ "215", "SPECTRA", TYPE_CHANGER, SENSE_HARDWARE_ERROR, 0x87, 0x2, SENSE_ABORT, T_("FFPROM Write Operation Failed")},
	{ "215", "SPECTRA", TYPE_CHANGER, SENSE_HARDWARE_ERROR, 0x85, 0x1, SENSE_ABORT, T_("Robot not Initialized")},
	{ "215", "SPECTRA", TYPE_CHANGER, SENSE_HARDWARE_ERROR, 0x85, 0x99, SENSE_ABORT, T_("Generic Robotics  Error")},
	{ "215", "SPECTRA", TYPE_CHANGER, SENSE_HARDWARE_ERROR, 0x85, 0x2, SENSE_ABORT, T_("Long Axis Robotics Error")},
	{ "215", "SPECTRA", TYPE_CHANGER, SENSE_HARDWARE_ERROR, 0x85, 0x3, SENSE_ABORT, T_("Short Axis Robotics Error")},
	{ "215", "SPECTRA", TYPE_CHANGER, SENSE_HARDWARE_ERROR, 0x85, 0x4, SENSE_ABORT, T_("Ambient Light Detected")},
	{ "215", "SPECTRA", TYPE_CHANGER, SENSE_HARDWARE_ERROR, UCHAR_MAX, UCHAR_MAX, SENSE_ABORT, T_("Default for SENSE_HARDWARE_ERROR")},

	{"215", "SPECTRA", TYPE_CHANGER, SENSE_ILLEGAL_REQUEST, 0x1A, 0x0, SENSE_ABORT, T_("Parameter List Length Error")},
	{"215", "SPECTRA", TYPE_CHANGER, SENSE_ILLEGAL_REQUEST, 0x20, 0x0, SENSE_ABORT, T_("Invalid Command Code")},
	{"215", "SPECTRA", TYPE_CHANGER, SENSE_ILLEGAL_REQUEST, 0x21, 0x01, SENSE_ABORT, T_("Invalid Element Address")},
	{"215", "SPECTRA", TYPE_CHANGER, SENSE_ILLEGAL_REQUEST, 0x24, 0x0, SENSE_ABORT, T_("Invalid Field in CDB")},
	{"215", "SPECTRA", TYPE_CHANGER, SENSE_ILLEGAL_REQUEST, 0x25, 0x0, SENSE_ABORT, T_("LUN Not Supported")},
	{"215", "SPECTRA", TYPE_CHANGER, SENSE_ILLEGAL_REQUEST, 0x26, 0x0, SENSE_ABORT, T_("Invalid Parameter Field")},
	{"215", "SPECTRA", TYPE_CHANGER, SENSE_ILLEGAL_REQUEST, 0x3b, 0xd, SENSE_ABORT, T_("Medium Destination is full")},
	{"215", "SPECTRA", TYPE_CHANGER, SENSE_ILLEGAL_REQUEST, 0x3b, 0xe, SENSE_ABORT, T_("Medium Source Element is Full")},
	{"215", "SPECTRA", TYPE_CHANGER, SENSE_ILLEGAL_REQUEST, 0x3d, 0x80, SENSE_ABORT, T_("Disconnects Must be Allowed")},
	{"215", "SPECTRA", TYPE_CHANGER, SENSE_ILLEGAL_REQUEST, 0x80, 0x18, SENSE_ABORT, T_("Conflict, Element is Reserved")},
	{"215", "SPECTRA", TYPE_CHANGER, SENSE_ILLEGAL_REQUEST, 0x81, 0x2, SENSE_ABORT, T_("Library is Full of Tapes")},
	{"215", "SPECTRA", TYPE_CHANGER, SENSE_ILLEGAL_REQUEST, 0x81, 0x3, SENSE_ABORT, T_("Grip Arm not Empty")},
	{"215", "SPECTRA", TYPE_CHANGER, SENSE_ILLEGAL_REQUEST, UCHAR_MAX , UCHAR_MAX, SENSE_ABORT, T_("Default for SENSE_ILLEGAL_REQUEST")},

	{"215", "SPECTRA", TYPE_CHANGER, SENSE_UNIT_ATTENTION, 0x28, 0x0, SENSE_IES, T_("Inventory possible Altered")},
	{"215", "SPECTRA", TYPE_CHANGER, SENSE_UNIT_ATTENTION, 0x29, 0x0, SENSE_RETRY, T_("A Reset Has Occured")},
	{"215", "SPECTRA", TYPE_CHANGER, SENSE_UNIT_ATTENTION, 0x24, 0x1, SENSE_IGNORE, T_("Mode Parameter Have CHanged")},
	{"215", "SPECTRA", TYPE_CHANGER, SENSE_UNIT_ATTENTION, UCHAR_MAX, UCHAR_MAX, SENSE_IGNORE, T_("Default for SENSE_UNIT_ATTENTION")},

	{"215", "SPECTRA", TYPE_CHANGER, SENSE_VENDOR_SPECIFIC, 0x83, 0x00, SENSE_ABORT, T_("Barcode Label is Unread")},
	{"215", "SPECTRA", TYPE_CHANGER, SENSE_VENDOR_SPECIFIC, 0x83, 0x01, SENSE_ABORT, T_("Problem Reading Barcode")},
	{"215", "SPECTRA", TYPE_CHANGER, SENSE_VENDOR_SPECIFIC, 0x83, 0x11, SENSE_ABORT, T_("Tape in Drive & Unmounted")},
	{"215", "SPECTRA", TYPE_CHANGER, SENSE_VENDOR_SPECIFIC, 0x84, 0x00, SENSE_ABORT, T_("Unsupported SCSI Command")},
	{"215", "SPECTRA", TYPE_CHANGER, SENSE_VENDOR_SPECIFIC, 0x84, 0x01, SENSE_ABORT, T_("No Response from SCSI Target")},
	{"215", "SPECTRA", TYPE_CHANGER, SENSE_VENDOR_SPECIFIC, 0x84, 0x02, SENSE_ABORT, T_("Check Condition form Target")},
	{"215", "SPECTRA", TYPE_CHANGER, SENSE_VENDOR_SPECIFIC, 0x84, 0x03, SENSE_ABORT, T_("SCSI ID Same as Library's ID")},
	{"215", "SPECTRA", TYPE_CHANGER, SENSE_VENDOR_SPECIFIC, 0x84, 0x08,  SENSE_ABORT, T_("Busy Condition from Target")},
	{"215", "SPECTRA", TYPE_CHANGER, SENSE_VENDOR_SPECIFIC, 0x84, 0x18, SENSE_ABORT, T_("SCSI Reservation Conflict")},
	{"215", "SPECTRA", TYPE_CHANGER, SENSE_VENDOR_SPECIFIC,  UCHAR_MAX, UCHAR_MAX, SENSE_ABORT, T_("Default for SENSE_VENDOR_SPECIFIC")},

	{ "215", "SPECTRA", TYPE_CHANGER,  SENSE_CHG_ELEMENT_STATUS, UCHAR_MAX, UCHAR_MAX, SENSE_IGNORE, T_("Default for SENSE_CHG_ELEMENT_STATUS")},

	{ "215", "SPECTRA", TYPE_CHANGER, UCHAR_MAX, 0x0, 0x0, SENSE_ABORT, T_("Nothing found for Spectra/215")},

	{ NULL, "", 0x0, UCHAR_MAX, 0x0, 0x0, 0x0, ""},

	};


void
DumpSense(void)
{
	SenseType_T *pwork = (SenseType_T *)&SenseType;

	while (pwork->ident != NULL)
	{
		if (pwork->sense == UCHAR_MAX)
		{
			g_printf("\n");
		} else {
			g_printf(_("%s %s %02X %02X %02X %d %s\n"),pwork->ident, pwork->vendor,
				pwork->sense,
				pwork->asc,
				pwork->ascq,
				pwork->ret,
				_(pwork->text));
		}
		pwork++;
	}
}

/*
 * Decode the Sense Key,ASC, ASCQ and device type, and return an action Type.
 *	type describes the device type as returned by the inquiry command
 *	ignsense changes the way the ASC/ASCQ values are handled.
 *	 if = 0 the sense key is also used for decoding,
 *	 if > 0 the sense key is ignored in the search, and only ASC/ASCQ will be checked
 *	sense is the sense key returned by the scsi command
 *	ASC is the ASC value returned by the scsi command
 *	ASCQ is the ASCQ value returned by the scsi command