xscutimer_selftest.c

自学ZedBoard：使用IP通过ARM PS访问FPGA（源代码）

/* $Id: xscutimer_selftest.c,v 1.1.2.1 2011/01/20 04:01:52 sadanan Exp $ */
/******************************************************************************
*
* (c) Copyright 2010 Xilinx, Inc. All rights reserved.
*
* This file contains confidential and proprietary information of Xilinx, Inc.
* and is protected under U.S. and international copyright and other
* intellectual property laws.
*
* DISCLAIMER
* This disclaimer is not a license and does not grant any rights to the
* materials distributed herewith. Except as otherwise provided in a valid
* license issued to you by Xilinx, and to the maximum extent permitted by
* applicable law: (1) THESE MATERIALS ARE MADE AVAILABLE "AS IS" AND WITH ALL
* FAULTS, AND XILINX HEREBY DISCLAIMS ALL WARRANTIES AND CONDITIONS, EXPRESS,
* IMPLIED, OR STATUTORY, INCLUDING BUT NOT LIMITED TO WARRANTIES OF
* MERCHANTABILITY, NON-INFRINGEMENT, OR FITNESS FOR ANY PARTICULAR PURPOSE;
* and (2) Xilinx shall not be liable (whether in contract or tort, including
* negligence, or under any other theory of liability) for any loss or damage
* of any kind or nature related to, arising under or in connection with these
* materials, including for any direct, or any indirect, special, incidental,
* or consequential loss or damage (including loss of data, profits, goodwill,
* or any type of loss or damage suffered as a result of any action brought by
* a third party) even if such damage or loss was reasonably foreseeable or
* Xilinx had been advised of the possibility of the same.
*
* CRITICAL APPLICATIONS
* Xilinx products are not designed or intended to be fail-safe, or for use in
* any application requiring fail-safe performance, such as life-support or
* safety devices or systems, Class III medical devices, nuclear facilities,
* applications related to the deployment of airbags, or any other applications
* that could lead to death, personal injury, or severe property or
* environmental damage (individually and collectively, "Critical
* Applications"). Customer assumes the sole risk and liability of any use of
* Xilinx products in Critical Applications, subject only to applicable laws
* and regulations governing limitations on product liability.
*
* THIS COPYRIGHT NOTICE AND DISCLAIMER MUST BE RETAINED AS PART OF THIS FILE
* AT ALL TIMES.
*
******************************************************************************/
/****************************************************************************/
/**
*
* @file xscutimer_selftest.c
*
* Contains diagnostic self-test functions for the XScuTimer driver.
*
* <pre>
* MODIFICATION HISTORY:
*
* Ver   Who Date     Changes
* ----- --- -------- ---------------------------------------------
* 1.00a nm  03/10/10 First release
* </pre>
*
******************************************************************************/

/***************************** Include Files *********************************/

#include "xscutimer.h"

/************************** Constant Definitions *****************************/

#define XSCUTIMER_SELFTEST_VALUE	0xA55AF00F

/**************************** Type Definitions *******************************/

/***************** Macros (Inline Functions) Definitions *********************/

/************************** Function Prototypes ******************************/

/************************** Variable Definitions *****************************/

/****************************************************************************/
/**
*
* Run a self-test on the timer. This test clears the timer enable bit in
* the control register, writes to the timer load register and verifies the
* value read back matches the value written and restores the control register
* and the timer load register.
*
* @param	InstancePtr is a pointer to the XScuTimer instance.
*
* @return
*		- XST_SUCCESS if self-test was successful.
*		- XST_FAILURE if self test was not successful.
*
* @note		None.
*
******************************************************************************/
int XScuTimer_SelfTest(XScuTimer *InstancePtr)
{
	u32 Register;
	u32 CtrlOrig;
	u32 LoadOrig;

	/*
	 * Assert to ensure the inputs are valid and the instance has been
	 * initialized.
	 */
	Xil_AssertNonvoid(InstancePtr != NULL);
	Xil_AssertNonvoid(InstancePtr->IsReady == XIL_COMPONENT_IS_READY);

	/*
	 * Save the contents of the Control Register and stop the timer.
	 */
	CtrlOrig = XScuTimer_ReadReg(InstancePtr->Config.BaseAddr,
				  XSCUTIMER_CONTROL_OFFSET);
	Register = CtrlOrig & ~XSCUTIMER_CONTROL_ENABLE_MASK;
	XScuTimer_WriteReg(InstancePtr->Config.BaseAddr,
			XSCUTIMER_CONTROL_OFFSET, Register);

	/*
	 * Save the contents of the Load Register.
	 * Load a new test value in the Load Register, read it back and
	 * compare it with the written value.
	 */
	LoadOrig = XScuTimer_ReadReg((InstancePtr)->Config.BaseAddr,
				  XSCUTIMER_LOAD_OFFSET);
	XScuTimer_LoadTimer(InstancePtr, XSCUTIMER_SELFTEST_VALUE);
	Register = XScuTimer_ReadReg((InstancePtr)->Config.BaseAddr,
				  XSCUTIMER_LOAD_OFFSET);

	/*
	 * Restore the contents of the Load Register and Control Register.
	 */
	XScuTimer_LoadTimer(InstancePtr, LoadOrig);
	XScuTimer_WriteReg(InstancePtr->Config.BaseAddr,
			XSCUTIMER_CONTROL_OFFSET, CtrlOrig);

	/*
	 * Return a Failure if the contents of the Load Register do not
	 * match with the value written to it.
	 */
	if (Register != XSCUTIMER_SELFTEST_VALUE) {
		return XST_FAILURE;
	}

	return XST_SUCCESS;
}