📄 lcd.c
字号:
/*****************************************************************************
* Copyright Statement:
* --------------------
* This software is protected by Copyright and the information contained
* herein is confidential. The software may not be copied and the information
* contained herein may not be used or disclosed except with the written
* permission of MediaTek Inc. (C) 2001
*
*****************************************************************************/
/*****************************************************************************
*
* Filename:
* ---------
* lcd.c
*
* Project:
* --------
* Maui_Software
*
* Description:
* ------------
* This Module defines the LCD driver.
*
* Author:
* -------
* -------
*
*============================================================================
* HISTORY
* Below this line, this part is controlled by PVCS VM. DO NOT MODIFY!!
*------------------------------------------------------------------------------
* removed!
* removed!
* removed!
* removed!
* removed!
* removed!
* removed!
* removed!
* removed!
* removed!
* removed!
* removed!
* removed!
* removed!
* removed!
* removed!
* removed!
* removed!
* removed!
* removed!
* removed!
* removed!
* removed!
* removed!
* removed!
* removed!
* removed!
* removed!
* removed!
* removed!
* removed!
* removed!
* removed!
* removed!
* removed!
* removed!
* removed!
* removed!
* removed!
* removed!
* removed!
* removed!
* removed!
* removed!
* removed!
* removed!
* removed!
* removed!
* removed!
* removed!
* removed!
* removed!
* removed!
* removed!
*------------------------------------------------------------------------------
* Upper this line, this part is controlled by PVCS VM. DO NOT MODIFY!!
*============================================================================
/******************************/
/* Header file include */
/******************************/
#include "drv_comm.h"
#include "reg_base.h"
#include "lcd_sw_inc.h"
#include "lcd_sw.h"
#include "lcd_hw.h"
// Serial interface
#include "lcd_if.h"
#include "eint.h"
#include "cam_module.h"
#include <string.h>
#include <stdio.h>
static kal_uint8 nSubBias;
static kal_uint8 nSubPwr;
#if defined(MBK_MB2X68B)
#define DSC_MB2268B_CS 24
#define DSC_MB2268B_POWER_2V8 2
#define DSC_SENSOR_POWER_1V8 33
#endif /* MBK_MB2X68B */
#if ( (defined(MT6205B)) || (defined(MT6218))) //|| (defined(MT6217)))// || (defined(MT6218B))) //20050413 yguangyong added 6217 option
#define LCD_DMAENABLE
#endif /*MT6205B,MT6218*/
extern void GPIO_ModeSetup(kal_uint16 pin, kal_uint16 conf_dada);
extern void GPIO_WriteIO(char data, char port);
extern void PWM2_level(kal_uint8 level);
kal_bool lcd_assert_fail=KAL_FALSE;
#ifdef DUAL_LCD
/* BEGIN 2005-03-17 TCL-xjinming commented for GD85-2 LCD..... */
// #ifndef COLOR_SUBLCD
/* END 2005-03-17 TCL-xjinming commented for GD85-2 LCD..... */
const kal_uint8 SubLCDSetArray[]=
{
0x01, // 0000 0001
0x02, // 0000 0010
0x04, // 0000 0100
0x08, // 0000 1000
0x10, // 0001 0000
0x20, // 0010 0000
0x40, // 0100 0000
0x80 // 1000 0000
};
const kal_uint8 SubLCDReSetArray[]=
{
0xFE, // 1111 1110
0xFD, // 1111 1101
0xFB, // 1111 1011
0xF7, // 1111 0111
0xEF, // 1110 1111
0xDF, // 1101 1111
0xBF, // 1011 1111
0x7F // 0111 1111
};
/* BEGIN 2005-03-17 TCL-xjinming commented for GD85-2 LCD..... */
// #endif
/* END 2005-03-17 TCL-xjinming commented for GD85-2 LCD..... */
#endif
void LCD_Delay(kal_uint8 time)
{
//volatile kal_uint16 delay;
volatile kal_uint32 delay;
for (delay =0;delay <time*400;delay++) {} // 85us
}
void spi_ini(void)
{
#if ( (defined(MT6205B)) || (defined(MT6218)) )
/* Data size = 8bits, SPO = 1 and SPH = 1, SCR = LCD_CTRL0_SCRDiv16 */
DRV_WriteReg(LCD_SCON,(LCD_SCON_SPH|LCD_SCON_SPO));
DRV_Reg(DRVPDN_CON1) &= (~DRVPDN_CON1_LCD);
#endif /*MT6205B,MT6218*/
#if (defined(MT6218B) || defined(MT6219) || defined(MT6217))
REG_LCD_SERIAL_CONFIG = (LCD_SERIAL_CONFIG_CLOCK_PHASE_BIT | LCD_SERIAL_CONFIG_CLOCK_POLARITY_BIT);
#endif /* MT6218B, MT6219 */
#if ( (defined(MT6208)) || (defined(MT6205)) || (defined(FPGA)))
/* Data size = 8bits, SPO = 1 and SPH = 1, SCR = LCD_CTRL0_SCRDiv16 */
DRV_WriteReg(LCD_CTRL0,LCD_CTRL0_Normal);
/* continuous mode enable, DSB0,DSB1 = 1,1 , CS0PO,CS1PO = LOW enable */
DRV_WriteReg(LCD_CTRL1,LCD_CTRL1_Normal);
DRV_Reg(DRVPDN_CON1) &= (~DRVPDN_CON1_LCD);
#endif
}
/******************/
/* Main LCD Parameter */
/******************/
/* RENESAS HD66791 ***********************************************************/
/* 128x160(64K/262), Parallel i/o, COG Type */
/***************************************************************************/
#if (defined(__GD85_2_TCL_DRV_LCD_RENESAS_HD66791__))
#if (defined(MT6218B)||defined(MT6219)||defined(MT6217))
void init_lcd_interface(void)
{
#if !defined(MBK_MB2X68B)
#ifdef DUAL_LCD
GPIO_ModeSetup(24, 1);
#endif
#endif
DRV_Reg(DRVPDN_CON1) &= (~DRVPDN_CON1_LCD); /* Power on LCD */
REG_LCD_ROI_CTRL=0;
CLEAR_LCD_CTRL_RESET_PIN;
#if (defined(MT6218B))
#if defined(MBK_MB2X68B) // CharlesWu added
SET_LCD_PARALLEL_CE2WR_SETUP_TIME(0); //SET_LCD_PARALLEL_CE2WR_SETUP_TIME((kal_uint32)2); // CharlesWu
SET_LCD_PARALLEL_CE2WR_HOLD_TIME(0); //SET_LCD_PARALLEL_CE2WR_HOLD_TIME(2); // CharlesWu
SET_LCD_PARALLEL_CE2RD_SETUP_TIME(0);
SET_LCD_PARALLEL_WRITE_WAIT_STATE(10); //SET_LCD_PARALLEL_WRITE_WAIT_STATE(8); // CharlesWu
SET_LCD_PARALLEL_READ_LATENCY_TIME(14); //SET_LCD_PARALLEL_READ_LATENCY_TIME(0); // CharlesWu
SET_LCD_ROI_CTRL_CMD_LATENCY(8);
#else /* MBK_MB2X68B */
SET_LCD_PARALLEL_CE2WR_SETUP_TIME((kal_uint32)2);
SET_LCD_PARALLEL_CE2WR_HOLD_TIME(2);
SET_LCD_PARALLEL_CE2RD_SETUP_TIME(0);
SET_LCD_PARALLEL_WRITE_WAIT_STATE(10);
SET_LCD_PARALLEL_READ_LATENCY_TIME(0);
SET_LCD_ROI_CTRL_CMD_LATENCY(10);
#endif /* MBK_MB2X68B */
DISABLE_LCD_PARALLEL_SYNC;
#elif (defined(MT6219))
SET_LCD_PARALLEL_CE2WR_SETUP_TIME((kal_uint32)0);
SET_LCD_PARALLEL_CE2WR_HOLD_TIME(0);
SET_LCD_PARALLEL_CE2RD_SETUP_TIME(0);
SET_LCD_PARALLEL_WRITE_WAIT_STATE(4);
SET_LCD_PARALLEL_READ_LATENCY_TIME(2);
SET_LCD_ROI_CTRL_CMD_LATENCY(2);
DISABLE_LCD_PARALLEL_SYNC;
#elif (defined(MT6217))
SET_LCD_PARALLEL_CE2WR_SETUP_TIME((kal_uint32)0);
SET_LCD_PARALLEL_CE2WR_HOLD_TIME(0);
SET_LCD_PARALLEL_CE2RD_SETUP_TIME(0);
SET_LCD_PARALLEL_WRITE_WAIT_STATE(24);// must be checked again !!
SET_LCD_PARALLEL_READ_LATENCY_TIME(22);
SET_LCD_ROI_CTRL_CMD_LATENCY(2);
SET_LCD_PARALLEL_8BIT_DATA_BUS;
SET_LCD_PARALLEL_CLOCK_52M;
#ifdef DUAL_LCD
SET_LCD_PARALLEL1_CE2WR_SETUP_TIME((kal_uint32)0);
SET_LCD_PARALLEL1_CE2WR_HOLD_TIME(0);
SET_LCD_PARALLEL1_CE2RD_SETUP_TIME(0);
SET_LCD_PARALLEL1_WRITE_WAIT_STATE(24);
SET_LCD_PARALLEL1_READ_LATENCY_TIME(20);
SET_LCD_ROI_CTRL_CMD_LATENCY(2);
#endif
#endif
#if defined(MBK_MB2X68B) // CharlesWu added
GPIO_ModeSetup(20, 2); // CharlesWu added
DSCInit(); // CharlesWu added
#else
LCD_Delay(50);
#endif /* MBK_MB2X68B */ // CharlesWu added
SET_LCD_CTRL_RESET_PIN;
} /* init_lcd_interface() */
#endif /* MT6217, MT6218B, MT6219 */
void LCD_Set_Window_Coordinate_HD66791 (kal_uint16 start_x1, kal_uint16 start_y1, kal_uint16 end_x2, kal_uint16 end_y2)
{
LCD_CtrlWrite_HD66791(INDEX_R44H);
LCD_DataWrite_HD66791(((end_x2 & 0xFF)<<8) | (start_x1 & 0xFF));
LCD_CtrlWrite_HD66791(INDEX_R45H);
LCD_DataWrite_HD66791(((end_y2 & 0xFF)<<8) | (start_y1 & 0xFF));
}
void LCD_blockClear_HD66791(kal_uint16 x1,kal_uint16 y1,kal_uint16 x2,kal_uint16 y2,kal_uint16 data)
{
kal_uint16 LCD_x;
kal_uint16 LCD_y;
LCD_Set_Window_Coordinate_HD66791(x1, y1, x2, y2);
LCD_CtrlWrite_HD66791(INDEX_R21H);
LCD_CtrlWrite_HD66791(INDEX_R22H);
LCD_DataWrite_HD66791(0x0000);
for(LCD_x=x1; LCD_x<=x2; LCD_x++)
for(LCD_y=y1; LCD_y<=y2; LCD_y++)
LCD_RAMWrite_HD66791(data);
}
void LCD_Init_HD66791(kal_uint32 bkground, void **buf_addr)
{
#if (!(defined(MT6218B)||defined(MT6219)||defined(MT6218)||defined(MT6217))) //20050415 yguangyong added 6217
if(buf_addr)
*buf_addr = &lcd_shadow_buffer[0][0];
#endif
#ifdef MT6218
#ifdef MCU_13M
*EMI_COND0 = 0xe003; /*MT6218*/
#endif /*MCU_13M*/
#ifdef MCU_26M
*EMI_COND0 = 0xe104; /*MT6218*/
#endif /*MCU_26M*/
#ifdef MCU_39M
*EMI_COND0 = 0xe205; /*MT6218*/
#endif /*MCU_39M*/
#ifdef MCU_52M
*EMI_COND0 = 0xe306; /*MT6218*/
#endif /*MCU_52M*/
#endif /*MT6218*/
LCD_CtrlWrite_HD66791(INDEX_R00H);
LCD_DataWrite_HD66791(0x0001);
LCD_Delay(15);
LCD_CtrlWrite_HD66791(INDEX_R00H);
LCD_DataWrite_HD66791(0x0001);
LCD_Delay(150);
LCD_CtrlWrite_HD66791(INDEX_R12H);
LCD_DataWrite_HD66791(0x0000);
LCD_CtrlWrite_HD66791(INDEX_R13H);
LCD_DataWrite_HD66791(0x0000);
LCD_CtrlWrite_HD66791(INDEX_R10H);
LCD_DataWrite_HD66791(0x0004);
LCD_CtrlWrite_HD66791(INDEX_R11H);
LCD_DataWrite_HD66791(0x0A11);//(0x0A12);
LCD_CtrlWrite_HD66791(INDEX_R12H);
LCD_DataWrite_HD66791(0x0009);
LCD_CtrlWrite_HD66791(INDEX_R13H);
LCD_DataWrite_HD66791(0x0E0F);
LCD_CtrlWrite_HD66791(INDEX_R10H);
LCD_DataWrite_HD66791(0x3024);
LCD_CtrlWrite_HD66791(INDEX_R12H);
LCD_DataWrite_HD66791(0x001D);//(0x001E);
LCD_Delay (150);
LCD_Delay(150);
LCD_Delay(150);
LCD_CtrlWrite_HD66791(INDEX_R13H);
LCD_DataWrite_HD66791(0x2D0F);
LCD_Delay(150);
LCD_Delay(150);
LCD_Delay(150);
LCD_CtrlWrite_HD66791(INDEX_R10H);
LCD_DataWrite_HD66791(0x3820);
LCD_CtrlWrite_HD66791(INDEX_R01H);
LCD_DataWrite_HD66791(0x0515);
LCD_CtrlWrite_HD66791(INDEX_R02H);
LCD_DataWrite_HD66791(0x0700);
LCD_CtrlWrite_HD66791(INDEX_R03H);
LCD_DataWrite_HD66791(0x1030);
LCD_CtrlWrite_HD66791(INDEX_R07H);
LCD_DataWrite_HD66791(0x0000);
LCD_CtrlWrite_HD66791(INDEX_R08H);
LCD_DataWrite_HD66791(0x0808);
LCD_CtrlWrite_HD66791(INDEX_R0BH);
LCD_DataWrite_HD66791(0x0008);
LCD_CtrlWrite_HD66791(INDEX_R0CH);
LCD_DataWrite_HD66791(0x0000);
LCD_CtrlWrite_HD66791(INDEX_R0DH);
LCD_DataWrite_HD66791(0x444A);
LCD_CtrlWrite_HD66791(INDEX_R15H);
LCD_DataWrite_HD66791(0x0002);
LCD_CtrlWrite_HD66791(INDEX_R40H);
LCD_DataWrite_HD66791(0x0001);
LCD_CtrlWrite_HD66791(INDEX_R41H);
LCD_DataWrite_HD66791(0x0000);
LCD_CtrlWrite_HD66791(INDEX_R42H);
LCD_DataWrite_HD66791(0x9F00);
LCD_CtrlWrite_HD66791(INDEX_R43H);
LCD_DataWrite_HD66791(0xAFAF);
LCD_CtrlWrite_HD66791(INDEX_R44H);
LCD_DataWrite_HD66791(0x7F00);
LCD_CtrlWrite_HD66791(INDEX_R45H);
LCD_DataWrite_HD66791(0x9F00);
LCD_CtrlWrite_HD66791(INDEX_R23H);
LCD_DataWrite_HD66791(0x0000);
LCD_CtrlWrite_HD66791(INDEX_R24H);
LCD_DataWrite_HD66791(0x0000);
LCD_CtrlWrite_HD66791(INDEX_R30H);
LCD_DataWrite_HD66791(0x0100);
LCD_CtrlWrite_HD66791(INDEX_R31H);
LCD_DataWrite_HD66791(0x0507);
LCD_CtrlWrite_HD66791(INDEX_R32H);
LCD_DataWrite_HD66791(0x0003);
LCD_CtrlWrite_HD66791(INDEX_R33H);
LCD_DataWrite_HD66791(0x0604);
LCD_CtrlWrite_HD66791(INDEX_R34H);
LCD_DataWrite_HD66791(0x0407);
LCD_CtrlWrite_HD66791(INDEX_R35H);
LCD_DataWrite_HD66791(0x0002);
LCD_CtrlWrite_HD66791(INDEX_R36H);
LCD_DataWrite_HD66791(0x0706);
LCD_CtrlWrite_HD66791(INDEX_R37H);
LCD_DataWrite_HD66791(0x0406);
LCD_CtrlWrite_HD66791(INDEX_R38H);
LCD_DataWrite_HD66791(0x0008);
LCD_CtrlWrite_HD66791(INDEX_R39H);
LCD_DataWrite_HD66791(0x0008);
LCD_blockClear_HD66791(0, 0, 128, 128, 0x001F);
LCD_CtrlWrite_HD66791(INDEX_R07H);
LCD_DataWrite_HD66791(0x0027);
LCD_CtrlWrite_HD66791(INDEX_R07H);
LCD_DataWrite_HD66791(0x0037);
}
void LCD_EnterSleep_HD66791(void)
{
LCD_CtrlWrite_HD66791(INDEX_R07H);
LCD_DataWrite_HD66791(DISPLAYOFF_D0);
LCD_Delay (150);
LCD_Delay (150);
⌨️ 快捷键说明
复制代码
Ctrl + C
搜索代码
Ctrl + F
全屏模式
F11
切换主题
Ctrl + Shift + D
显示快捷键
?
增大字号
Ctrl + =
减小字号
Ctrl + -