cstartup.s79

这是一个关于LPC2468芯片的IAR环境下的按键测试例程源代码

;/*****************************************************************************
;*   startup.s: startup file for NXP LPC230x Family Microprocessors
;*
;*   Copyright(C) 2006, NXP Semiconductor
;*   All rights reserved.
;*
;*   History
;*   2006.09.01  ver 1.00    Prelimnary version, first Release
;*****************************************************************************/

;/*
; *  REMAP: when set the startup code initializes the register MEMMAP
; *  which overwrites the settings of the CPU configuration pins. The
; *  startup and interrupt vectors are remapped from:
; *     0x00000000  default setting (not remapped)
; *     0x40000000  when RAM_MODE is used
; *
; *  RAM_MODE: when set the device is configured for code execution
; *  from on-chip RAM starting at address 0x40000000.
; */

; Standard definitions of Mode bits and Interrupt (I & F) flags in PSRs

Mode_USR        DEFINE  0x10
Mode_FIQ        DEFINE  0x11
Mode_IRQ        DEFINE  0x12
Mode_SVC        DEFINE  0x13
Mode_ABT        DEFINE  0x17
Mode_UND        DEFINE  0x1B
Mode_SYS        DEFINE  0x1F

I_Bit           DEFINE  0x80            ; when I bit is set, IRQ is disabled
F_Bit           DEFINE  0x40            ; when F bit is set, FIQ is disabled

; Exception Vectors
; Mapped to Address 0.
; Absolute addressing mode must be used.
; Dummy Handlers are implemented as infinite loops which can be modified.

        PROGRAM ?RESET
        COMMON  INTVEC:CODE(3)
        PUBLIC  __program_start
        EXTERN  Reset_Handler, Undef_Handler, SWI_Handler, PAbt_Handler, DAbt_Handler, FIQ_Handler
        CODE32  ; Always ARM mode after reset

__program_start
    org 0x00
        LDR     PC, =Reset_Handler
    org 0x04
        LDR     PC, =Undef_Handler
    org 0x08
        LDR     PC, =SWI_Handler
    org 0x0C
        LDR     PC, =PAbt_Handler
    org 0x10
        LDR     PC, =DAbt_Handler
    org 0x18
        LDR     PC, [PC, #-0x0120]  ; Vector from VicVectAddr
    org 0x1C
        LDR     PC, =FIQ_Handler

        LTORG
        ENDMOD

; Reset Handler

        MODULE  ?CSTARTUP
        RSEG  IRQ_STACK:DATA(3)
        RSEG  FIQ_STACK:DATA(3)
        RSEG  SVC_STACK:DATA(3)
        RSEG  ABT_STACK:DATA(3)
        RSEG  UND_STACK:DATA(3)
        RSEG  CSTACK:DATA(3)
        RSEG  ICODE:CODE(3)
        PUBLIC  Reset_Handler, Undef_Handler, SWI_Handler, PAbt_Handler, DAbt_Handler, FIQ_Handler
        EXTERN  ?main
        CODE32

Reset_Handler

;  Enter Undefined Instruction Mode and set its Stack Pointer
        MSR     CPSR_c, #Mode_UND|I_Bit|F_Bit
        LDR     SP, =SFE(UND_STACK)&0xFFFFFFF8

;  Enter Abort Mode and set its Stack Pointer
        MSR     CPSR_c, #Mode_ABT|I_Bit|F_Bit
        LDR     SP, =SFE(ABT_STACK)&0xFFFFFFF8

;  Enter FIQ Mode and set its Stack Pointer
        MSR     CPSR_c, #Mode_FIQ|I_Bit|F_Bit
        LDR     SP, =SFE(FIQ_STACK)&0xFFFFFFF8

;  Enter IRQ Mode and set its Stack Pointer
        MSR     CPSR_c, #Mode_IRQ|I_Bit|F_Bit
        LDR     SP, =SFE(IRQ_STACK)&0xFFFFFFF8

;  Enter Supervisor Mode and set its Stack Pointer
        MSR     CPSR_c, #Mode_SVC|I_Bit|F_Bit
        LDR     SP, =SFE(SVC_STACK)&0xFFFFFFF8

;  Enter User Mode and set its Stack Pointer
        MSR     CPSR_c, #Mode_USR
        LDR     SP, =SFE(CSTACK)&0xFFFFFFF8

; Enter the C code

        LDR     R0, =?main
        BX      R0
        B       .

Undef_Handler
SWI_Handler
PAbt_Handler
DAbt_Handler
FIQ_Handler
        B       .

        LTORG
        ENDMOD
        END