connect.c

r73模块的无线网卡在Linux下的驱动程序

/***************************************************************************
 * RT2x00 SourceForge Project - http://rt2x00.serialmonkey.com             *
 *                                                                         *
 *   This program is free software; you can redistribute it and/or modify  *
 *   it under the terms of the GNU General Public License as published by  *
 *   the Free Software Foundation; either version 2 of the License, or     *
 *   (at your option) any later version.                                   *
 *                                                                         *
 *   This program is distributed in the hope that it will be useful,       *
 *   but WITHOUT ANY WARRANTY; without even the implied warranty of        *
 *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the         *
 *   GNU General Public License for more details.                          *
 *                                                                         *
 *   You should have received a copy of the GNU General Public License     *
 *   along with this program; if not, write to the                         *
 *   Free Software Foundation, Inc.,                                       *
 *   59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.             *
 *                                                                         *
 *   Licensed under the GNU GPL                                            *
 *   Original code supplied under license from RaLink Inc, 2004.           *
 ***************************************************************************/

/***************************************************************************
 *	Module Name:	connect.c
 *
 *	Abstract:
 *
 *	Revision History:
 *	Who		When		What
 *	--------	----------	-----------------------------
 *	Name		Date		Modification logs
 *	John		2004-08-08	Major modification from RT2560
 *
 ***************************************************************************/

#include "rt_config.h"


UCHAR	CipherSuiteWpaNoneTkip[] = {
		0x00, 0x50, 0xf2, 0x01,	// oui
		0x01, 0x00,				// Version
		0x00, 0x50, 0xf2, 0x02,	// Multicast
		0x01, 0x00,				// Number of unicast
		0x00, 0x50, 0xf2, 0x02,	// unicast
		0x01, 0x00,				// number of authentication method
		0x00, 0x50, 0xf2, 0x00	// authentication
		};
UCHAR	CipherSuiteWpaNoneTkipLen = (sizeof(CipherSuiteWpaNoneTkip) / sizeof(UCHAR));

UCHAR	CipherSuiteWpaNoneAes[] = {
		0x00, 0x50, 0xf2, 0x01,	// oui
		0x01, 0x00,				// Version
		0x00, 0x50, 0xf2, 0x04,	// Multicast
		0x01, 0x00,				// Number of unicast
		0x00, 0x50, 0xf2, 0x04,	// unicast
		0x01, 0x00,				// number of authentication method
		0x00, 0x50, 0xf2, 0x00	// authentication
		};
UCHAR	CipherSuiteWpaNoneAesLen = (sizeof(CipherSuiteWpaNoneAes) / sizeof(UCHAR));


// The following MACRO is called after 1. starting an new IBSS, 2. succesfully JOIN an IBSS,
// or 3. succesfully ASSOCIATE to a BSS, 4. successfully RE_ASSOCIATE to a BSS
// All settings successfuly negotiated furing MLME state machines become final settings
// and are copied to pAd->ActiveCfg
#define COPY_SETTINGS_FROM_MLME_AUX_TO_ACTIVE_CFG(_pAd) 								\
{																						\
	_pAd->PortCfg.SsidLen = _pAd->MlmeAux.SsidLen;									  \
	memcpy(_pAd->PortCfg.Ssid, _pAd->MlmeAux.Ssid, _pAd->MlmeAux.SsidLen);	  \
	COPY_MAC_ADDR(_pAd->PortCfg.Bssid, _pAd->MlmeAux.Bssid);						  \
	_pAd->PortCfg.Channel = _pAd->MlmeAux.Channel;									  \
	_pAd->ActiveCfg.Aid = _pAd->MlmeAux.Aid;											\
	_pAd->ActiveCfg.AtimWin = _pAd->MlmeAux.AtimWin;									\
	_pAd->ActiveCfg.CapabilityInfo = _pAd->MlmeAux.CapabilityInfo;						\
	_pAd->PortCfg.BeaconPeriod = _pAd->MlmeAux.BeaconPeriod;						  \
	_pAd->ActiveCfg.CfpMaxDuration = _pAd->MlmeAux.CfpMaxDuration;						\
	_pAd->ActiveCfg.CfpPeriod = _pAd->MlmeAux.CfpPeriod;								\
	_pAd->ActiveCfg.SupRateLen = _pAd->MlmeAux.SupRateLen;								\
	memcpy(_pAd->ActiveCfg.SupRate, _pAd->MlmeAux.SupRate, _pAd->MlmeAux.SupRateLen);	\
	_pAd->ActiveCfg.ExtRateLen = _pAd->MlmeAux.ExtRateLen;										\
	memcpy(_pAd->ActiveCfg.ExtRate, _pAd->MlmeAux.ExtRate, _pAd->MlmeAux.ExtRateLen);	\
	memcpy(&_pAd->PortCfg.APEdcaParm, &_pAd->MlmeAux.APEdcaParm, sizeof(EDCA_PARM));  \
	memcpy(&_pAd->PortCfg.APQosCapability, &_pAd->MlmeAux.APQosCapability, sizeof(QOS_CAPABILITY_PARM));  \
	memcpy(&_pAd->PortCfg.APQbssLoad, &_pAd->MlmeAux.APQbssLoad, sizeof(QBSS_LOAD_PARM)); \
}

/*
	==========================================================================
	Description:
	==========================================================================
*/
VOID MlmeCntlInit(
	IN PRTMP_ADAPTER pAd,
	IN STATE_MACHINE *S,
	OUT STATE_MACHINE_FUNC Trans[])
{
	// Control state machine differs from other state machines, the interface
	// follows the standard interface
	pAd->Mlme.CntlMachine.CurrState = CNTL_IDLE;
}

/*
	==========================================================================
	Description:
	==========================================================================
*/
VOID MlmeCntlMachinePerformAction(
	IN PRTMP_ADAPTER pAd,
	IN STATE_MACHINE *S,
	IN MLME_QUEUE_ELEM *Elem)
{
	switch(pAd->Mlme.CntlMachine.CurrState)
	{
		case CNTL_IDLE:
			CntlIdleProc(pAd, Elem);
			break;
		case CNTL_WAIT_DISASSOC:
			CntlWaitDisassocProc(pAd, Elem);
			break;
		case CNTL_WAIT_JOIN:
			CntlWaitJoinProc(pAd, Elem);
			break;

		// CNTL_WAIT_REASSOC is the only state in CNTL machine that does
		// not triggered directly or indirectly by "RTMPSetInformation(OID_xxx)".
		// Therefore not protected by NDIS's "only one outstanding OID request"
		// rule. Which means NDIS may SET OID in the middle of ROAMing attempts.
		// Current approach is to block new SET request at RTMPSetInformation()
		// when CntlMachine.CurrState is not CNTL_IDLE
		case CNTL_WAIT_REASSOC:
			CntlWaitReassocProc(pAd, Elem);
			break;

		case CNTL_WAIT_START:
			CntlWaitStartProc(pAd, Elem);
			break;
		case CNTL_WAIT_AUTH:
			CntlWaitAuthProc(pAd, Elem);
			break;
		case CNTL_WAIT_AUTH2:
			CntlWaitAuthProc2(pAd, Elem);
			break;
		case CNTL_WAIT_ASSOC:
			CntlWaitAssocProc(pAd, Elem);
			break;

		case CNTL_WAIT_OID_LIST_SCAN:
			if(Elem->MsgType == MT2_SCAN_CONF)
			{
				// Resume TxRing after SCANING complete. We hope the out-of-service time
				// won't be too long to let upper layer time-out the waiting frames
				RTUSBResumeMsduTransmission(pAd);

				pAd->Mlme.CntlMachine.CurrState = CNTL_IDLE;
			}
			break;

		case CNTL_WAIT_OID_DISASSOC:
			if (Elem->MsgType == MT2_DISASSOC_CONF)
			{
				DBGPRINT(RT_DEBUG_TRACE,
						"LinkDown(MlmeCntlMachinePerformAction)\n");
				// maybe wait for the disassoc frame to hit the air.
				RTUSBwaitTxDone(pAd);
				LinkDown(pAd, FALSE);
				pAd->Mlme.CntlMachine.CurrState = CNTL_IDLE;
			}
			break;

		default:
			DBGPRINT_ERR("!ERROR! CNTL - Illegal message type(=%d)", Elem->MsgType);
			break;
	}
}

/*
	==========================================================================
	Description:
	==========================================================================
*/
VOID CntlIdleProc(
	IN PRTMP_ADAPTER pAd,
	IN MLME_QUEUE_ELEM *Elem)
{
	MLME_DISASSOC_REQ_STRUCT   DisassocReq;

	if (RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_RADIO_OFF))
	{
		if (pAd->MlmeAux.CurrReqIsFromNdis)
			pAd->MlmeAux.CurrReqIsFromNdis = FALSE;
		return;
	}

	switch(Elem->MsgType)
	{
		case OID_802_11_SSID:
			CntlOidSsidProc(pAd, Elem);
			break;

		case OID_802_11_BSSID:
			CntlOidRTBssidProc(pAd,Elem);
			break;

		case OID_802_11_BSSID_LIST_SCAN:
			CntlOidScanProc(pAd,Elem);
			break;

		case OID_802_11_DISASSOCIATE:
			DisassocParmFill(pAd, &DisassocReq, pAd->PortCfg.Bssid, REASON_DISASSOC_STA_LEAVING);
			MlmeEnqueue(pAd, ASSOC_STATE_MACHINE, MT2_MLME_DISASSOC_REQ,
						sizeof(MLME_DISASSOC_REQ_STRUCT), &DisassocReq);
			pAd->Mlme.CntlMachine.CurrState = CNTL_WAIT_OID_DISASSOC;
			// Set the AutoReconnectSsid to prevent it reconnect to old SSID
			// Since calling this indicate user don't want to connect to that
			// SSID anymore.
			pAd->MlmeAux.AutoReconnectSsidLen= 32;
			memset(pAd->MlmeAux.AutoReconnectSsid, 0, pAd->MlmeAux.AutoReconnectSsidLen);
			break;

		case MT2_MLME_ROAMING_REQ:
			CntlMlmeRoamingProc(pAd, Elem);
			break;

		default:
			DBGPRINT(RT_DEBUG_TRACE, "CNTL - Illegal message in CntlIdleProc(MsgType=%d)\n",Elem->MsgType);
			break;
	}
}

VOID CntlOidScanProc(
	IN PRTMP_ADAPTER pAd,
	IN MLME_QUEUE_ELEM *Elem)
{
	MLME_SCAN_REQ_STRUCT	   ScanReq;
	ULONG					   BssIdx = BSS_NOT_FOUND;
	BSS_ENTRY				   CurrBss;

	DBGPRINT(RT_DEBUG_INFO, "CNTL - SCAN starts\n");

	// record current BSS if network is connected.
	// 2003-2-13 do not include current IBSS if this is the only STA in this IBSS.
	if (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_MEDIA_STATE_CONNECTED))
	{
		BssIdx = BssSsidTableSearch(&pAd->ScanTab, pAd->PortCfg.Bssid, pAd->PortCfg.Ssid, pAd->PortCfg.SsidLen, pAd->PortCfg.Channel);
		if (BssIdx != BSS_NOT_FOUND)
		{
			memcpy(&CurrBss, &pAd->ScanTab.BssEntry[BssIdx], sizeof(BSS_ENTRY));

			// 2003-2-20 reset this RSSI to a low value but not zero. In normal case, the coming SCAN
			//	   should return a correct RSSI to overwrite this. If no BEEACON received after SCAN,
			//	   at least we still report a "greater than 0" RSSI since we claim it's CONNECTED.
			//CurrBss.Rssi = pAd->BbpRssiToDbmDelta - 85; // assume -85 dB
		}
	}

	// clean up previous SCAN result, add current BSS back to table if any
	BssTableInit(&pAd->ScanTab);
	if (BssIdx != BSS_NOT_FOUND)
	{
		// DDK Note: If the NIC is associated with a particular BSSID and SSID
		//	  that are not contained in the list of BSSIDs generated by this scan, the
		//	  BSSID description of the currently associated BSSID and SSID should be
		//	  appended to the list of BSSIDs in the NIC's database.
		// To ensure this, we append this BSS as the first entry in SCAN result
		memcpy(&pAd->ScanTab.BssEntry[0], &CurrBss, sizeof(BSS_ENTRY));
		pAd->ScanTab.BssNr = 1;
	}

	ScanParmFill(pAd, &ScanReq, "", 0, BSS_ANY, SCAN_PASSIVE);
	MlmeEnqueue(pAd, SYNC_STATE_MACHINE, MT2_MLME_SCAN_REQ,
				sizeof(MLME_SCAN_REQ_STRUCT), &ScanReq);
	pAd->Mlme.CntlMachine.CurrState = CNTL_WAIT_OID_LIST_SCAN;
}

/*
	==========================================================================
	Description:
		Before calling this routine, user desired SSID should already been
		recorded in PortCfg.Ssid[]
	==========================================================================
*/
VOID CntlOidSsidProc(
	IN PRTMP_ADAPTER pAd,
	IN MLME_QUEUE_ELEM * Elem)
{
    PNDIS_802_11_SSID		   pOidSsid = (NDIS_802_11_SSID *)Elem->Msg;
	MLME_DISASSOC_REQ_STRUCT   DisassocReq;
	ULONG					   Now;


	// Step 1. record the desired user settings to MlmeAux
	memcpy(pAd->MlmeAux.Ssid, pOidSsid->Ssid, pOidSsid->SsidLength);
	pAd->MlmeAux.SsidLen = (UCHAR)pOidSsid->SsidLength;
	memset(pAd->MlmeAux.Bssid, 0, MAC_ADDR_LEN);
	pAd->MlmeAux.BssType = pAd->PortCfg.BssType;

	//
	// Update Reconnect Ssid, that user desired to connect.
	//
	memcpy(pAd->MlmeAux.AutoReconnectSsid, pAd->MlmeAux.Ssid, pAd->MlmeAux.SsidLen);
	pAd->MlmeAux.AutoReconnectSsidLen = pAd->MlmeAux.SsidLen;


	// step 2. find all matching BSS in the lastest SCAN result (inBssTab)
	//	  & log them into MlmeAux.SsidBssTab for later-on iteration. Sort by RSSI order
	BssTableSsidSort(pAd, &pAd->MlmeAux.SsidBssTab, pAd->MlmeAux.Ssid, pAd->MlmeAux.SsidLen);

	DBGPRINT(RT_DEBUG_TRACE, "CNTL - %d BSS match the desire SSID - %s\n",pAd->MlmeAux.SsidBssTab.BssNr, pAd->MlmeAux.Ssid);

	Now = jiffies;

	if (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_MEDIA_STATE_CONNECTED) &&
		(pAd->PortCfg.SsidLen == pAd->MlmeAux.SsidBssTab.BssEntry[0].SsidLen) &&
		NdisEqualMemory(pAd->PortCfg.Ssid, pAd->MlmeAux.SsidBssTab.BssEntry[0].Ssid, pAd->PortCfg.SsidLen) &&
		MAC_ADDR_EQUAL(pAd->PortCfg.Bssid, pAd->MlmeAux.SsidBssTab.BssEntry[0].Bssid))
	{
		// Case 1. already connected with an AP who has the desired SSID
		//		   with highest RSSI

		if (((pAd->PortCfg.AuthMode == Ndis802_11AuthModeWPA)	 ||
			 (pAd->PortCfg.AuthMode == Ndis802_11AuthModeWPAPSK) ||
			 (pAd->PortCfg.AuthMode == Ndis802_11AuthModeWPA2)	 ||
			 (pAd->PortCfg.AuthMode == Ndis802_11AuthModeWPA2PSK)
#if WPA_SUPPLICANT_SUPPORT
			  || (pAd->PortCfg.IEEE8021X == TRUE)
#endif
			 )  &&
			 (pAd->PortCfg.PortSecured == WPA_802_1X_PORT_NOT_SECURED))
		{
			// case 1.1 For WPA, WPA-PSK, if the 1x port is not secured, we have to redo
			//			connection process
			DBGPRINT(RT_DEBUG_TRACE, "CNTL - disassociate with current AP...\n");
			DisassocParmFill(pAd, &DisassocReq, pAd->PortCfg.Bssid, REASON_DISASSOC_STA_LEAVING);
			MlmeEnqueue(pAd, ASSOC_STATE_MACHINE, MT2_MLME_DISASSOC_REQ,
						sizeof(MLME_DISASSOC_REQ_STRUCT), &DisassocReq);
			pAd->Mlme.CntlMachine.CurrState = CNTL_WAIT_DISASSOC;
		}
		else if (pAd->bConfigChanged == TRUE)
		{
			// case 1.2 Important Config has changed, we have to reconnect to the same AP
			DBGPRINT(RT_DEBUG_TRACE, "CNTL - disassociate with current AP Because config changed...\n");
			DisassocParmFill(pAd, &DisassocReq, pAd->PortCfg.Bssid, REASON_DISASSOC_STA_LEAVING);
			MlmeEnqueue(pAd, ASSOC_STATE_MACHINE, MT2_MLME_DISASSOC_REQ,
						sizeof(MLME_DISASSOC_REQ_STRUCT), &DisassocReq);
			pAd->Mlme.CntlMachine.CurrState = CNTL_WAIT_DISASSOC;
		}
		else
		{
			// case 1.3. already connected to the SSID with highest RSSI.
			DBGPRINT(RT_DEBUG_TRACE, "CNTL - already with this BSSID. ignore this SET_SSID request\n");


			// We only check if same to the BSSID with highest RSSI.
			// If roaming of same SSID required, we still do the reconnection.
			// same BSSID, go back to idle state directly
			if (pAd->MlmeAux.CurrReqIsFromNdis)
			{
			}
			pAd->Mlme.CntlMachine.CurrState = CNTL_IDLE;
		}
	}
	else if (INFRA_ON(pAd))
	{
		// case 2. active INFRA association existent
		//	  roaming is done within miniport driver, nothing to do with configuration
		//	  utility. so upon a new SET(OID_802_11_SSID) is received, we just
		//	  disassociate with the current associated AP,
		//	  then perform a new association with this new SSID, no matter the
		//	  new/old SSID are the same or not.
		DBGPRINT(RT_DEBUG_TRACE, "CNTL - disassociate with current AP...\n");
		DisassocParmFill(pAd, &DisassocReq, pAd->PortCfg.Bssid, REASON_DISASSOC_STA_LEAVING);
		MlmeEnqueue(pAd, ASSOC_STATE_MACHINE, MT2_MLME_DISASSOC_REQ,
					sizeof(MLME_DISASSOC_REQ_STRUCT), &DisassocReq);
		pAd->Mlme.CntlMachine.CurrState = CNTL_WAIT_DISASSOC;
	}
	else
	{
		if (ADHOC_ON(pAd))
		{
			DBGPRINT(RT_DEBUG_TRACE, "CNTL - drop current ADHOC\n");
			LinkDown(pAd, FALSE);
			OPSTATUS_CLEAR_FLAG(pAd, fOP_STATUS_MEDIA_STATE_CONNECTED);
			DBGPRINT(RT_DEBUG_TRACE, "NDIS_STATUS_MEDIA_DISCONNECT Event C!\n");
		}

		if ((pAd->MlmeAux.SsidBssTab.BssNr == 0) &&
			(pAd->PortCfg.bAutoReconnect == TRUE) &&
			(pAd->MlmeAux.BssType == BSS_INFRA) &&
			(MlmeValidateSSID(pAd->MlmeAux.Ssid, pAd->MlmeAux.SsidLen) == TRUE))
		{
			MLME_SCAN_REQ_STRUCT	   ScanReq;

			DBGPRINT(RT_DEBUG_TRACE, "CNTL - No matching BSS, start a new scan\n");


			ScanParmFill(pAd, &ScanReq, pAd->MlmeAux.Ssid, pAd->MlmeAux.SsidLen, BSS_ANY, SCAN_ACTIVE);
			MlmeEnqueue(pAd, SYNC_STATE_MACHINE, MT2_MLME_SCAN_REQ,
						sizeof(MLME_SCAN_REQ_STRUCT), &ScanReq);
			pAd->Mlme.CntlMachine.CurrState = CNTL_WAIT_OID_LIST_SCAN;

			// Reset Missed scan number
			pAd->PortCfg.LastScanTime = Now;
		}
		else