📄 rtmp_def.h
字号:
/*************************************************************************** * RT2x00 SourceForge Project - http://rt2x00.serialmonkey.com * * * * This program is free software; you can redistribute it and/or modify * * it under the terms of the GNU General Public License as published by * * the Free Software Foundation; either version 2 of the License, or * * (at your option) any later version. * * * * This program is distributed in the hope that it will be useful, * * but WITHOUT ANY WARRANTY; without even the implied warranty of * * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * * GNU General Public License for more details. * * * * You should have received a copy of the GNU General Public License * * along with this program; if not, write to the * * Free Software Foundation, Inc., * * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. * * * * Licensed under the GNU GPL * * Original code supplied under license from RaLink Inc, 2004. * ***************************************************************************//*************************************************************************** * Module Name: rtmp_def.h * * Abstract: Miniport related definition header * * Revision History: * Who When What * -------- ---------- ----------------------------- * Paul Lin 08-01-2002 created * John Chang 08-05-2003 add definition for 11g & other drafts * idamlaj 04-10-2006 Add extra devices * ***************************************************************************/#ifndef __RTMP_DEF_H__#define __RTMP_DEF_H__//// Debug information verbosity: lower values indicate higher urgency//#define RT_DEBUG_OFF 0#define RT_DEBUG_ERROR 1#define RT_DEBUG_WARN 2#define RT_DEBUG_TRACE 4#define RT_DEBUG_INFO 8#define RT_DEBUG_LOUD 16#ifdef BIG_ENDIAN#define DIR_READ 0#define DIR_WRITE 1#define TYPE_TXD 0#define TYPE_RXD 1#endif//WEP#define WEP_SMALL_KEY_LEN (40/8)#define WEP_LARGE_KEY_LEN (104/8)//// Entry number for each DMA descriptor ring//#define TX_RING_SIZE 32#define PRIO_RING_SIZE 16#define RX_RING_SIZE 32#define BEACON_RING_SIZE 2#define MGMT_RING_SIZE PRIO_RING_SIZE#define PRIO_BUFFER_SIZE 1024 // 2048#define BUFFER_SIZE 2400 //2048#define MAX_FRAME_SIZE 2346 // Maximum 802.11 frame size#define ALLOC_RX_PACKET_POOL (RX_RING_SIZE)#define ALLOC_RX_BUFFER_POOL (ALLOC_RX_PACKET_POOL)#define TX_RING 0xa#define ATIM_RING 0xb#define PRIO_RING 0xc#define RX_RING 0xd#define BEACON_RING 0xe#define NULL_RING 0xf#define MAX_TX_PROCESS 2#define MAX_RX_PROCESS 4#define MAX_CLIENT 2#define LOCAL_TXBUF_SIZE 2048#define TXD_SIZE 24#define RXD_SIZE 24#define TX_DMA_1ST_BUFFER_SIZE 64 // only the 1st physical buffer is pre-allocated#define MGMT_DMA_BUFFER_SIZE 2048#define RX_DMA_BUFFER_SIZE 4096#define MAX_AGGREGATION_SIZE 4096#define MAX_DMA_DONE_PROCESS TX_RING_SIZE#define MAX_TX_DONE_PROCESS 8#define MAX_NUM_OF_TUPLE_CACHE 2#define MAX_MCAST_LIST_SIZE 32//// RTMP_ADAPTER flags//#define fRTMP_ADAPTER_TEST_MODE 0x00000001#define fRTMP_ADAPTER_MLME_RESET_IN_PROGRESS 0x00000002#define fRTMP_ADAPTER_HARDWARE_ERROR 0x00000004#define fRTMP_ADAPTER_SEND_PACKET_ERROR 0x00000010#define fRTMP_ADAPTER_RECEIVE_PACKET_ERROR 0x00000020#define fRTMP_ADAPTER_HALT_IN_PROGRESS 0x00000040#define fRTMP_ADAPTER_RESET_IN_PROGRESS 0x00000080#define fRTMP_ADAPTER_NIC_NOT_EXIST 0x00000100#define fRTMP_ADAPTER_TX_RING_ALLOCATED 0x00000200#define fRTMP_ADAPTER_ATIM_RING_ALLOCATED 0x00000400#define fRTMP_ADAPTER_PRIO_RING_ALLOCATED 0x00000800#define fRTMP_ADAPTER_RX_RING_ALLOCATED 0x00001000#define fRTMP_ADAPTER_BSS_JOIN_IN_PROGRESS 0x00002000#define fRTMP_ADAPTER_BSS_SCAN_IN_PROGRESS 0x00004000#define fRTMP_ADAPTER_REASSOC_IN_PROGRESS 0x00008000#define fRTMP_ADAPTER_MEDIA_STATE_PENDING 0x00010000#define fRTMP_ADAPTER_RADIO_OFF 0x00020000#define fRTMP_ADAPTER_BULKOUT_RESET 0x00040000#define fRTMP_ADAPTER_BULKIN_RESET 0x00080000#define fRTMP_ADAPTER_RESET_DATA_SW_QUEUE 0x00100000#define fRTMP_ADAPTER_RESET_PIPE_IN_PROGRESS 0x00200000#define fRTMP_ADAPTER_SCAN_CHANNEL_IN_PROGRESS 0x04000000#define fRTMP_ADAPTER_RADIO_MEASUREMENT 0x08000000#define fRTMP_ADAPTER_MEDIA_STATE_CHANGE 0x20000000// Lock bit for accessing different ring buffers#define fRTMP_ADAPTER_TX_RING_BUSY 0x80000000#define fRTMP_ADAPTER_PRIO_RING_BUSY 0x40000000#define fRTMP_ADAPTER_ATIM_RING_BUSY 0x20000000#define fRTMP_ADAPTER_RX_RING_BUSY 0x10000000// Lock bit for accessing different queue#define fRTMP_ADAPTER_TX_QUEUE_BUSY 0x08000000#define fRTMP_ADAPTER_PRIO_QUEUE_BUSY 0x04000000//// STA operation status flags//#define fOP_STATUS_INFRA_ON 0x00000001#define fOP_STATUS_ADHOC_ON 0x00000002#define fOP_STATUS_BG_PROTECTION_INUSED 0x00000004#define fOP_STATUS_SHORT_SLOT_INUSED 0x00000008#define fOP_STATUS_SHORT_PREAMBLE_INUSED 0x00000010#define fOP_STATUS_RECEIVE_DTIM 0x00000020#define fOP_STATUS_TX_RATE_SWITCH_ENABLED 0x00000040#define fOP_STATUS_MEDIA_STATE_CONNECTED 0x00000080#define fOP_STATUS_WMM_INUSED 0x00000100#define fOP_STATUS_AGGREGATION_INUSED 0x00000200#define fOP_STATUS_DOZE 0x00000400#define fOP_STATUS_MAX_RETRY_ENABLED 0x00000800#define fOP_STATUS_RTS_PROTECTION_ENABLE 0x00001000#define fOP_STATUS_FIRMWARE_LOAD 0x00002000//// Flags for Bulkflags control for bulk out data//#define fRTUSB_BULK_OUT_DATA_NULL 0x00000001#define fRTUSB_BULK_OUT_RTS 0x00000002#define fRTUSB_BULK_OUT_MLME 0x00000004#define fRTUSB_BULK_OUT_BEACON_1 0x00000008#define fRTUSB_BULK_OUT_DATA_NORMAL 0x00010000#define fRTUSB_BULK_OUT_DATA_NORMAL_2 0x00020000#define fRTUSB_BULK_OUT_DATA_NORMAL_3 0x00040000#define fRTUSB_BULK_OUT_DATA_NORMAL_4 0x00080000#define fRTUSB_BULK_OUT_BEACON_0 0x00000010#define fRTUSB_BULK_OUT_PSPOLL 0x00000020#define fRTUSB_BULK_OUT_DATA_FRAG 0x00000040#define fRTUSB_BULK_OUT_DATA_FRAG_2 0x00000080#define fRTUSB_BULK_OUT_DATA_FRAG_3 0x00000100#define fRTUSB_BULK_OUT_DATA_FRAG_4 0x00000200//// AP's client table operation status flags//#define fCLIENT_STATUS_WMM_CAPABLE 0x00000001 // CLIENT can parse QOS DATA frame#define fCLIENT_STATUS_AGGREGATION_CAPABLE 0x00000002 // CLIENT can receive Ralink's proprietary TX aggregation frame//// STA configuration flags////#define fSTA_CFG_ENABLE_TX_BURST 0x00000001//// Error code section//// NDIS_ERROR_CODE_ADAPTER_NOT_FOUND#define ERRLOG_READ_PCI_SLOT_FAILED 0x00000101L#define ERRLOG_WRITE_PCI_SLOT_FAILED 0x00000102L#define ERRLOG_VENDOR_DEVICE_NOMATCH 0x00000103L// NDIS_ERROR_CODE_ADAPTER_DISABLED#define ERRLOG_BUS_MASTER_DISABLED 0x00000201L// NDIS_ERROR_CODE_UNSUPPORTED_CONFIGURATION#define ERRLOG_INVALID_SPEED_DUPLEX 0x00000301L#define ERRLOG_SET_SECONDARY_FAILED 0x00000302L// NDIS_ERROR_CODE_OUT_OF_RESOURCES#define ERRLOG_OUT_OF_MEMORY 0x00000401L#define ERRLOG_OUT_OF_SHARED_MEMORY 0x00000402L#define ERRLOG_OUT_OF_MAP_REGISTERS 0x00000403L#define ERRLOG_OUT_OF_BUFFER_POOL 0x00000404L#define ERRLOG_OUT_OF_NDIS_BUFFER 0x00000405L#define ERRLOG_OUT_OF_PACKET_POOL 0x00000406L#define ERRLOG_OUT_OF_NDIS_PACKET 0x00000407L#define ERRLOG_OUT_OF_LOOKASIDE_MEMORY 0x00000408L// NDIS_ERROR_CODE_HARDWARE_FAILURE#define ERRLOG_SELFTEST_FAILED 0x00000501L#define ERRLOG_INITIALIZE_ADAPTER 0x00000502L#define ERRLOG_REMOVE_MINIPORT 0x00000503L// NDIS_ERROR_CODE_RESOURCE_CONFLICT#define ERRLOG_MAP_IO_SPACE 0x00000601L#define ERRLOG_QUERY_ADAPTER_RESOURCES 0x00000602L#define ERRLOG_NO_IO_RESOURCE 0x00000603L#define ERRLOG_NO_INTERRUPT_RESOURCE 0x00000604L#define ERRLOG_NO_MEMORY_RESOURCE 0x00000605L//============================================================// Length definitions#define PEER_KEY_NO 2#define MAC_ADDR_LEN 6#define TIMESTAMP_LEN 8#define MAX_LEN_OF_SUPPORTED_RATES 12 // 1, 2, 5.5, 11, 6, 9, 12, 18, 24, 36, 48, 54#define MAX_LEN_OF_KEY 32 // 32 octets == 256 bits, Redefine for WPA#define MAX_NUM_OF_CHANNELS 43 //1-14, 36/40/44/48/52/56/60/64/100/104/108/112/116/120/124/ //128/132/136/140/149/153/157/161/165/34/38/42/46 + 1 as NULL termination#define MAX_NUM_OF_A_CHANNELS 24 //36, 40, 44, 48, 52, 56, 60, 64, 100, 104, 108, 112, 116, 120, 124, 128, 132, 136, 140, 149, 153, 157, 161, 165#define J52_CHANNEL_START_OFFSET 38 //1-14, 36/40/44/48/52/56/60/64/100/104/108/112/116/120/124/ //128/132/136/140/149/153/157/161/165/#define MAX_LEN_OF_SSID 32#define CIPHER_TEXT_LEN 128#define MAX_LEN_OF_MLME_BUFFER 2048#define MAX_MLME_HANDLER_MEMORY 20 //each them cantains MAX_LEN_OF_MLME_BUFFER size#define MAX_FRAME_LEN 2338#define MAX_VIE_LEN 160 // New for WPA cipher suite variable IE sizes.#define MAX_TX_POWER_LEVEL 100 /* mW */#define MAX_RSSI_TRIGGER -10 /* dBm */#define MIN_RSSI_TRIGGER -200 /* dBm */#define MAX_FRAG_THRESHOLD 2346 /* byte count */#define MIN_FRAG_THRESHOLD 256 /* byte count */#define MAX_RTS_THRESHOLD 2347 /* byte count */#define MIN_RTS_THRESHOLD 0// key related definitions#define SHARE_KEY_NUM 4#define MAX_LEN_OF_SHARE_KEY 16 // byte count#define MAX_LEN_OF_PEER_KEY 16 // byte count#define PAIRWISE_KEY_NO 64 // in MAC ASIC pairwise key table#define GROUP_KEY_NO 4#define PMKID_NO 4 // Number of PMKID saved supported// power status related definitions#define PWR_ACTIVE 0#define PWR_SAVE 1#define PWR_UNKNOWN 2// BSS Type definitions#define BSS_ADHOC 0 // = Ndis802_11IBSS#define BSS_INFRA 1 // = Ndis802_11Infrastructure#define BSS_ANY 2 // = Ndis802_11AutoUnknown#define BSS_MONITOR 3 // = Ndis802_11Monitor// Reason code definitions#define REASON_RESERVED 0#define REASON_UNSPECIFY 1#define REASON_NO_LONGER_VALID 2#define REASON_DEAUTH_STA_LEAVING 3#define REASON_DISASSOC_INACTIVE 4#define REASON_DISASSPC_AP_UNABLE 5#define REASON_CLS2ERR 6#define REASON_CLS3ERR 7#define REASON_DISASSOC_STA_LEAVING 8#define REASON_STA_REQ_ASSOC_NOT_AUTH 9#define REASON_INVALID_IE 13#define REASON_MIC_FAILURE 14#define REASON_4_WAY_TIMEOUT 15#define REASON_GROUP_KEY_HS_TIMEOUT 16#define REASON_IE_DIFFERENT 17#define REASON_MCIPHER_NOT_VALID 18#define REASON_UCIPHER_NOT_VALID 19#define REASON_AKMP_NOT_VALID 20#define REASON_UNSUPPORT_RSNE_VER 21#define REASON_INVALID_RSNE_CAP 22
⌨️ 快捷键说明
复制代码
Ctrl + C
搜索代码
Ctrl + F
全屏模式
F11
切换主题
Ctrl + Shift + D
显示快捷键
?
增大字号
Ctrl + =
减小字号
Ctrl + -