⭐ 欢迎来到虫虫下载站! | 📦 资源下载 📁 资源专辑 ℹ️ 关于我们
⭐ 虫虫下载站

📄 rt2x00usb.c

📁 linux内核源码
💻 C
字号:
/*	Copyright (C) 2004 - 2007 rt2x00 SourceForge Project	<http://rt2x00.serialmonkey.com>	This program is free software; you can redistribute it and/or modify	it under the terms of the GNU General Public License as published by	the Free Software Foundation; either version 2 of the License, or	(at your option) any later version.	This program is distributed in the hope that it will be useful,	but WITHOUT ANY WARRANTY; without even the implied warranty of	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the	GNU General Public License for more details.	You should have received a copy of the GNU General Public License	along with this program; if not, write to the	Free Software Foundation, Inc.,	59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. *//*	Module: rt2x00usb	Abstract: rt2x00 generic usb device routines. *//* * Set enviroment defines for rt2x00.h */#define DRV_NAME "rt2x00usb"#include <linux/kernel.h>#include <linux/module.h>#include <linux/usb.h>#include "rt2x00.h"#include "rt2x00usb.h"/* * Interfacing with the HW. */int rt2x00usb_vendor_request(const struct rt2x00_dev *rt2x00dev,			     const u8 request, const u8 requesttype,			     const u16 offset, const u16 value,			     void *buffer, const u16 buffer_length,			     const int timeout){	struct usb_device *usb_dev =	    interface_to_usbdev(rt2x00dev_usb(rt2x00dev));	int status;	unsigned int i;	unsigned int pipe =	    (requesttype == USB_VENDOR_REQUEST_IN) ?	    usb_rcvctrlpipe(usb_dev, 0) : usb_sndctrlpipe(usb_dev, 0);	for (i = 0; i < REGISTER_BUSY_COUNT; i++) {		status = usb_control_msg(usb_dev, pipe, request, requesttype,					 value, offset, buffer, buffer_length,					 timeout);		if (status >= 0)			return 0;		/*		 * Check for errors		 * -ENODEV: Device has disappeared, no point continuing.		 * All other errors: Try again.		 */		else if (status == -ENODEV)			break;	}	ERROR(rt2x00dev,	      "Vendor Request 0x%02x failed for offset 0x%04x with error %d.\n",	      request, offset, status);	return status;}EXPORT_SYMBOL_GPL(rt2x00usb_vendor_request);int rt2x00usb_vendor_request_buff(const struct rt2x00_dev *rt2x00dev,				  const u8 request, const u8 requesttype,				  const u16 offset, void *buffer,				  const u16 buffer_length, const int timeout){	int status;	/*	 * Check for Cache availability.	 */	if (unlikely(!rt2x00dev->csr_cache || buffer_length > CSR_CACHE_SIZE)) {		ERROR(rt2x00dev, "CSR cache not available.\n");		return -ENOMEM;	}	if (requesttype == USB_VENDOR_REQUEST_OUT)		memcpy(rt2x00dev->csr_cache, buffer, buffer_length);	status = rt2x00usb_vendor_request(rt2x00dev, request, requesttype,					  offset, 0, rt2x00dev->csr_cache,					  buffer_length, timeout);	if (!status && requesttype == USB_VENDOR_REQUEST_IN)		memcpy(buffer, rt2x00dev->csr_cache, buffer_length);	return status;}EXPORT_SYMBOL_GPL(rt2x00usb_vendor_request_buff);/* * TX data handlers. */static void rt2x00usb_interrupt_txdone(struct urb *urb){	struct data_entry *entry = (struct data_entry *)urb->context;	struct data_ring *ring = entry->ring;	struct rt2x00_dev *rt2x00dev = ring->rt2x00dev;	struct data_desc *txd = (struct data_desc *)entry->skb->data;	u32 word;	int tx_status;	if (!test_bit(DEVICE_ENABLED_RADIO, &rt2x00dev->flags) ||	    !__test_and_clear_bit(ENTRY_OWNER_NIC, &entry->flags))		return;	rt2x00_desc_read(txd, 0, &word);	/*	 * Remove the descriptor data from the buffer.	 */	skb_pull(entry->skb, ring->desc_size);	/*	 * Obtain the status about this packet.	 */	tx_status = !urb->status ? TX_SUCCESS : TX_FAIL_RETRY;	rt2x00lib_txdone(entry, tx_status, 0);	/*	 * Make this entry available for reuse.	 */	entry->flags = 0;	rt2x00_ring_index_done_inc(entry->ring);	/*	 * If the data ring was full before the txdone handler	 * we must make sure the packet queue in the mac80211 stack	 * is reenabled when the txdone handler has finished.	 */	if (!rt2x00_ring_full(ring))		ieee80211_wake_queue(rt2x00dev->hw,				     entry->tx_status.control.queue);}int rt2x00usb_write_tx_data(struct rt2x00_dev *rt2x00dev,			    struct data_ring *ring, struct sk_buff *skb,			    struct ieee80211_tx_control *control){	struct usb_device *usb_dev =	    interface_to_usbdev(rt2x00dev_usb(rt2x00dev));	struct data_entry *entry = rt2x00_get_data_entry(ring);	int pipe = usb_sndbulkpipe(usb_dev, 1);	u32 length;	if (rt2x00_ring_full(ring)) {		ieee80211_stop_queue(rt2x00dev->hw, control->queue);		return -EINVAL;	}	if (test_bit(ENTRY_OWNER_NIC, &entry->flags)) {		ERROR(rt2x00dev,		      "Arrived at non-free entry in the non-full queue %d.\n"		      "Please file bug report to %s.\n",		      control->queue, DRV_PROJECT);		ieee80211_stop_queue(rt2x00dev->hw, control->queue);		return -EINVAL;	}	/*	 * Add the descriptor in front of the skb.	 */	skb_push(skb, ring->desc_size);	memset(skb->data, 0, ring->desc_size);	rt2x00lib_write_tx_desc(rt2x00dev, (struct data_desc *)skb->data,				(struct ieee80211_hdr *)(skb->data +							 ring->desc_size),				skb->len - ring->desc_size, control);	memcpy(&entry->tx_status.control, control, sizeof(*control));	entry->skb = skb;	/*	 * USB devices cannot blindly pass the skb->len as the	 * length of the data to usb_fill_bulk_urb. Pass the skb	 * to the driver to determine what the length should be.	 */	length = rt2x00dev->ops->lib->get_tx_data_len(rt2x00dev, skb);	/*	 * Initialize URB and send the frame to the device.	 */	__set_bit(ENTRY_OWNER_NIC, &entry->flags);	usb_fill_bulk_urb(entry->priv, usb_dev, pipe,			  skb->data, length, rt2x00usb_interrupt_txdone, entry);	usb_submit_urb(entry->priv, GFP_ATOMIC);	rt2x00_ring_index_inc(ring);	if (rt2x00_ring_full(ring))		ieee80211_stop_queue(rt2x00dev->hw, control->queue);	return 0;}EXPORT_SYMBOL_GPL(rt2x00usb_write_tx_data);/* * RX data handlers. */static void rt2x00usb_interrupt_rxdone(struct urb *urb){	struct data_entry *entry = (struct data_entry *)urb->context;	struct data_ring *ring = entry->ring;	struct rt2x00_dev *rt2x00dev = ring->rt2x00dev;	struct sk_buff *skb;	struct ieee80211_hdr *hdr;	struct rxdata_entry_desc desc;	int header_size;	int frame_size;	if (!test_bit(DEVICE_ENABLED_RADIO, &rt2x00dev->flags) ||	    !test_and_clear_bit(ENTRY_OWNER_NIC, &entry->flags))		return;	/*	 * Check if the received data is simply too small	 * to be actually valid, or if the urb is signaling	 * a problem.	 */	if (urb->actual_length < entry->ring->desc_size || urb->status)		goto skip_entry;	memset(&desc, 0x00, sizeof(desc));	rt2x00dev->ops->lib->fill_rxdone(entry, &desc);	/*	 * Allocate a new sk buffer to replace the current one.	 * If allocation fails, we should drop the current frame	 * so we can recycle the existing sk buffer for the new frame.	 * As alignment we use 2 and not NET_IP_ALIGN because we need	 * to be sure we have 2 bytes room in the head. (NET_IP_ALIGN	 * can be 0 on some hardware). We use these 2 bytes for frame	 * alignment later, we assume that the chance that	 * header_size % 4 == 2 is bigger then header_size % 2 == 0	 * and thus optimize alignment by reserving the 2 bytes in	 * advance.	 */	frame_size = entry->ring->data_size + entry->ring->desc_size;	skb = dev_alloc_skb(frame_size + 2);	if (!skb)		goto skip_entry;	skb_reserve(skb, 2);	skb_put(skb, frame_size);	/*	 * The data behind the ieee80211 header must be	 * aligned on a 4 byte boundary.	 * After that trim the entire buffer down to only	 * contain the valid frame data excluding the device	 * descriptor.	 */	hdr = (struct ieee80211_hdr *)entry->skb->data;	header_size =	    ieee80211_get_hdrlen(le16_to_cpu(hdr->frame_control));	if (header_size % 4 == 0) {		skb_push(entry->skb, 2);		memmove(entry->skb->data, entry->skb->data + 2, skb->len - 2);	}	skb_trim(entry->skb, desc.size);	/*	 * Send the frame to rt2x00lib for further processing.	 */	rt2x00lib_rxdone(entry, entry->skb, &desc);	/*	 * Replace current entry's skb with the newly allocated one,	 * and reinitialize the urb.	 */	entry->skb = skb;	urb->transfer_buffer = entry->skb->data;	urb->transfer_buffer_length = entry->skb->len;skip_entry:	if (test_bit(DEVICE_ENABLED_RADIO, &ring->rt2x00dev->flags)) {		__set_bit(ENTRY_OWNER_NIC, &entry->flags);		usb_submit_urb(urb, GFP_ATOMIC);	}	rt2x00_ring_index_inc(ring);}/* * Radio handlers */void rt2x00usb_enable_radio(struct rt2x00_dev *rt2x00dev){	struct usb_device *usb_dev =	    interface_to_usbdev(rt2x00dev_usb(rt2x00dev));	struct data_ring *ring;	struct data_entry *entry;	unsigned int i;	/*	 * Initialize the TX rings	 */	txringall_for_each(rt2x00dev, ring) {		for (i = 0; i < ring->stats.limit; i++)			ring->entry[i].flags = 0;		rt2x00_ring_index_clear(ring);	}	/*	 * Initialize and start the RX ring.	 */	rt2x00_ring_index_clear(rt2x00dev->rx);	for (i = 0; i < rt2x00dev->rx->stats.limit; i++) {		entry = &rt2x00dev->rx->entry[i];		usb_fill_bulk_urb(entry->priv, usb_dev,				  usb_rcvbulkpipe(usb_dev, 1),				  entry->skb->data, entry->skb->len,				  rt2x00usb_interrupt_rxdone, entry);		__set_bit(ENTRY_OWNER_NIC, &entry->flags);		usb_submit_urb(entry->priv, GFP_ATOMIC);	}}EXPORT_SYMBOL_GPL(rt2x00usb_enable_radio);void rt2x00usb_disable_radio(struct rt2x00_dev *rt2x00dev){	struct data_ring *ring;	unsigned int i;	rt2x00usb_vendor_request_sw(rt2x00dev, USB_RX_CONTROL, 0x0000, 0x0000,				    REGISTER_TIMEOUT);	/*	 * Cancel all rings.	 */	ring_for_each(rt2x00dev, ring) {		for (i = 0; i < ring->stats.limit; i++)			usb_kill_urb(ring->entry[i].priv);	}}EXPORT_SYMBOL_GPL(rt2x00usb_disable_radio);/* * Device initialization handlers. */static int rt2x00usb_alloc_urb(struct rt2x00_dev *rt2x00dev,			       struct data_ring *ring){	unsigned int i;	/*	 * Allocate the URB's	 */	for (i = 0; i < ring->stats.limit; i++) {		ring->entry[i].priv = usb_alloc_urb(0, GFP_KERNEL);		if (!ring->entry[i].priv)			return -ENOMEM;	}	return 0;}static void rt2x00usb_free_urb(struct rt2x00_dev *rt2x00dev,			       struct data_ring *ring){	unsigned int i;	if (!ring->entry)		return;	for (i = 0; i < ring->stats.limit; i++) {		usb_kill_urb(ring->entry[i].priv);		usb_free_urb(ring->entry[i].priv);		if (ring->entry[i].skb)			kfree_skb(ring->entry[i].skb);	}}int rt2x00usb_initialize(struct rt2x00_dev *rt2x00dev){	struct data_ring *ring;	struct sk_buff *skb;	unsigned int entry_size;	unsigned int i;	int status;	/*	 * Allocate DMA	 */	ring_for_each(rt2x00dev, ring) {		status = rt2x00usb_alloc_urb(rt2x00dev, ring);		if (status)			goto exit;	}	/*	 * For the RX ring, skb's should be allocated.	 */	entry_size = rt2x00dev->rx->data_size + rt2x00dev->rx->desc_size;	for (i = 0; i < rt2x00dev->rx->stats.limit; i++) {		skb = dev_alloc_skb(NET_IP_ALIGN + entry_size);		if (!skb)			goto exit;		skb_reserve(skb, NET_IP_ALIGN);		skb_put(skb, entry_size);		rt2x00dev->rx->entry[i].skb = skb;	}	return 0;exit:	rt2x00usb_uninitialize(rt2x00dev);	return status;}EXPORT_SYMBOL_GPL(rt2x00usb_initialize);void rt2x00usb_uninitialize(struct rt2x00_dev *rt2x00dev){	struct data_ring *ring;	ring_for_each(rt2x00dev, ring)		rt2x00usb_free_urb(rt2x00dev, ring);}EXPORT_SYMBOL_GPL(rt2x00usb_uninitialize);/* * USB driver handlers. */static void rt2x00usb_free_reg(struct rt2x00_dev *rt2x00dev){	kfree(rt2x00dev->rf);	rt2x00dev->rf = NULL;	kfree(rt2x00dev->eeprom);	rt2x00dev->eeprom = NULL;	kfree(rt2x00dev->csr_cache);	rt2x00dev->csr_cache = NULL;}static int rt2x00usb_alloc_reg(struct rt2x00_dev *rt2x00dev){	rt2x00dev->csr_cache = kzalloc(CSR_CACHE_SIZE, GFP_KERNEL);	if (!rt2x00dev->csr_cache)		goto exit;	rt2x00dev->eeprom = kzalloc(rt2x00dev->ops->eeprom_size, GFP_KERNEL);	if (!rt2x00dev->eeprom)		goto exit;	rt2x00dev->rf = kzalloc(rt2x00dev->ops->rf_size, GFP_KERNEL);	if (!rt2x00dev->rf)		goto exit;	return 0;exit:	ERROR_PROBE("Failed to allocate registers.\n");	rt2x00usb_free_reg(rt2x00dev);	return -ENOMEM;}int rt2x00usb_probe(struct usb_interface *usb_intf,		    const struct usb_device_id *id){	struct usb_device *usb_dev = interface_to_usbdev(usb_intf);	struct rt2x00_ops *ops = (struct rt2x00_ops *)id->driver_info;	struct ieee80211_hw *hw;	struct rt2x00_dev *rt2x00dev;	int retval;	usb_dev = usb_get_dev(usb_dev);	hw = ieee80211_alloc_hw(sizeof(struct rt2x00_dev), ops->hw);	if (!hw) {		ERROR_PROBE("Failed to allocate hardware.\n");		retval = -ENOMEM;		goto exit_put_device;	}	usb_set_intfdata(usb_intf, hw);	rt2x00dev = hw->priv;	rt2x00dev->dev = usb_intf;	rt2x00dev->ops = ops;	rt2x00dev->hw = hw;	rt2x00dev->usb_maxpacket =	    usb_maxpacket(usb_dev, usb_sndbulkpipe(usb_dev, 1), 1);	if (!rt2x00dev->usb_maxpacket)		rt2x00dev->usb_maxpacket = 1;	retval = rt2x00usb_alloc_reg(rt2x00dev);	if (retval)		goto exit_free_device;	retval = rt2x00lib_probe_dev(rt2x00dev);	if (retval)		goto exit_free_reg;	return 0;exit_free_reg:	rt2x00usb_free_reg(rt2x00dev);exit_free_device:	ieee80211_free_hw(hw);exit_put_device:	usb_put_dev(usb_dev);	usb_set_intfdata(usb_intf, NULL);	return retval;}EXPORT_SYMBOL_GPL(rt2x00usb_probe);void rt2x00usb_disconnect(struct usb_interface *usb_intf){	struct ieee80211_hw *hw = usb_get_intfdata(usb_intf);	struct rt2x00_dev *rt2x00dev = hw->priv;	/*	 * Free all allocated data.	 */	rt2x00lib_remove_dev(rt2x00dev);	rt2x00usb_free_reg(rt2x00dev);	ieee80211_free_hw(hw);	/*	 * Free the USB device data.	 */	usb_set_intfdata(usb_intf, NULL);	usb_put_dev(interface_to_usbdev(usb_intf));}EXPORT_SYMBOL_GPL(rt2x00usb_disconnect);#ifdef CONFIG_PMint rt2x00usb_suspend(struct usb_interface *usb_intf, pm_message_t state){	struct ieee80211_hw *hw = usb_get_intfdata(usb_intf);	struct rt2x00_dev *rt2x00dev = hw->priv;	int retval;	retval = rt2x00lib_suspend(rt2x00dev, state);	if (retval)		return retval;	rt2x00usb_free_reg(rt2x00dev);	/*	 * Decrease usbdev refcount.	 */	usb_put_dev(interface_to_usbdev(usb_intf));	return 0;}EXPORT_SYMBOL_GPL(rt2x00usb_suspend);int rt2x00usb_resume(struct usb_interface *usb_intf){	struct ieee80211_hw *hw = usb_get_intfdata(usb_intf);	struct rt2x00_dev *rt2x00dev = hw->priv;	int retval;	usb_get_dev(interface_to_usbdev(usb_intf));	retval = rt2x00usb_alloc_reg(rt2x00dev);	if (retval)		return retval;	retval = rt2x00lib_resume(rt2x00dev);	if (retval)		goto exit_free_reg;	return 0;exit_free_reg:	rt2x00usb_free_reg(rt2x00dev);	return retval;}EXPORT_SYMBOL_GPL(rt2x00usb_resume);#endif /* CONFIG_PM *//* * rt2x00pci module information. */MODULE_AUTHOR(DRV_PROJECT);MODULE_VERSION(DRV_VERSION);MODULE_DESCRIPTION("rt2x00 library");MODULE_LICENSE("GPL");

⌨️ 快捷键说明

复制代码 Ctrl + C
搜索代码 Ctrl + F
全屏模式 F11
切换主题 Ctrl + Shift + D
显示快捷键 ?
增大字号 Ctrl + =
减小字号 Ctrl + -