⭐ 欢迎来到虫虫下载站! | 📦 资源下载 📁 资源专辑 ℹ️ 关于我们
⭐ 虫虫下载站

📄 mpc834x_sys.c

📁 linux内核源码
💻 C
字号:
/* * MPC834x SYS board specific routines * * Maintainer: Kumar Gala <galak@kernel.crashing.org> * * Copyright 2005 Freescale Semiconductor Inc. * * This program is free software; you can redistribute  it and/or modify it * under  the terms of  the GNU General  Public License as published by the * Free Software Foundation;  either version 2 of the  License, or (at your * option) any later version. */#include <linux/stddef.h>#include <linux/kernel.h>#include <linux/init.h>#include <linux/errno.h>#include <linux/reboot.h>#include <linux/pci.h>#include <linux/kdev_t.h>#include <linux/major.h>#include <linux/console.h>#include <linux/delay.h>#include <linux/seq_file.h>#include <linux/root_dev.h>#include <linux/serial.h>#include <linux/tty.h>	/* for linux/serial_core.h */#include <linux/serial_core.h>#include <linux/initrd.h>#include <linux/module.h>#include <linux/fsl_devices.h>#include <asm/system.h>#include <asm/pgtable.h>#include <asm/page.h>#include <asm/atomic.h>#include <asm/time.h>#include <asm/io.h>#include <asm/machdep.h>#include <asm/ipic.h>#include <asm/bootinfo.h>#include <asm/pci-bridge.h>#include <asm/mpc83xx.h>#include <asm/irq.h>#include <asm/kgdb.h>#include <asm/ppc_sys.h>#include <mm/mmu_decl.h>#include <syslib/ppc83xx_setup.h>#ifndef CONFIG_PCIunsigned long isa_io_base = 0;unsigned long isa_mem_base = 0;#endifextern unsigned long total_memory;	/* in mm/init */unsigned char __res[sizeof (bd_t)];#ifdef CONFIG_PCIintmpc83xx_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin){	static char pci_irq_table[][4] =	    /*	     *      PCI IDSEL/INTPIN->INTLINE	     *       A      B      C      D	     */	{		{PIRQA, PIRQB, PIRQC, PIRQD},	/* idsel 0x11 */		{PIRQC, PIRQD, PIRQA, PIRQB},	/* idsel 0x12 */		{PIRQD, PIRQA, PIRQB, PIRQC},	/* idsel 0x13 */		{0, 0, 0, 0},		{PIRQA, PIRQB, PIRQC, PIRQD},	/* idsel 0x15 */		{PIRQD, PIRQA, PIRQB, PIRQC},	/* idsel 0x16 */		{PIRQC, PIRQD, PIRQA, PIRQB},	/* idsel 0x17 */		{PIRQB, PIRQC, PIRQD, PIRQA},	/* idsel 0x18 */		{0, 0, 0, 0},			/* idsel 0x19 */		{0, 0, 0, 0},			/* idsel 0x20 */	};	const long min_idsel = 0x11, max_idsel = 0x20, irqs_per_slot = 4;	return PCI_IRQ_TABLE_LOOKUP;}intmpc83xx_exclude_device(u_char bus, u_char devfn){	return PCIBIOS_SUCCESSFUL;}#endif /* CONFIG_PCI *//* ************************************************************************ * * Setup the architecture * */static void __initmpc834x_sys_setup_arch(void){	bd_t *binfo = (bd_t *) __res;	unsigned int freq;	struct gianfar_platform_data *pdata;	struct gianfar_mdio_data *mdata;	/* get the core frequency */	freq = binfo->bi_intfreq;	/* Set loops_per_jiffy to a half-way reasonable value,	   for use until calibrate_delay gets called. */	loops_per_jiffy = freq / HZ;#ifdef CONFIG_PCI	/* setup PCI host bridges */	mpc83xx_setup_hose();#endif	mpc83xx_early_serial_map();	/* setup the board related info for the MDIO bus */	mdata = (struct gianfar_mdio_data *) ppc_sys_get_pdata(MPC83xx_MDIO);	mdata->irq[0] = MPC83xx_IRQ_EXT1;	mdata->irq[1] = MPC83xx_IRQ_EXT2;	mdata->irq[2] = PHY_POLL;	mdata->irq[31] = PHY_POLL;	/* setup the board related information for the enet controllers */	pdata = (struct gianfar_platform_data *) ppc_sys_get_pdata(MPC83xx_TSEC1);	if (pdata) {		pdata->board_flags = FSL_GIANFAR_BRD_HAS_PHY_INTR;		pdata->bus_id = 0;		pdata->phy_id = 0;		memcpy(pdata->mac_addr, binfo->bi_enetaddr, 6);	}	pdata = (struct gianfar_platform_data *) ppc_sys_get_pdata(MPC83xx_TSEC2);	if (pdata) {		pdata->board_flags = FSL_GIANFAR_BRD_HAS_PHY_INTR;		pdata->bus_id = 0;		pdata->phy_id = 1;		memcpy(pdata->mac_addr, binfo->bi_enet1addr, 6);	}#ifdef CONFIG_BLK_DEV_INITRD	if (initrd_start)		ROOT_DEV = Root_RAM0;	else#endif#ifdef  CONFIG_ROOT_NFS		ROOT_DEV = Root_NFS;#else		ROOT_DEV = Root_HDA1;#endif}static void __initmpc834x_sys_map_io(void){	/* we steal the lowest ioremap addr for virt space */	io_block_mapping(VIRT_IMMRBAR, immrbar, 1024*1024, _PAGE_IO);}intmpc834x_sys_show_cpuinfo(struct seq_file *m){	uint pvid, svid, phid1;	bd_t *binfo = (bd_t *) __res;	unsigned int freq;	/* get the core frequency */	freq = binfo->bi_intfreq;	pvid = mfspr(SPRN_PVR);	svid = mfspr(SPRN_SVR);	seq_printf(m, "Vendor\t\t: Freescale Inc.\n");	seq_printf(m, "Machine\t\t: mpc%s sys\n", cur_ppc_sys_spec->ppc_sys_name);	seq_printf(m, "core clock\t: %d MHz\n"			"bus  clock\t: %d MHz\n",			(int)(binfo->bi_intfreq / 1000000),			(int)(binfo->bi_busfreq / 1000000));	seq_printf(m, "PVR\t\t: 0x%x\n", pvid);	seq_printf(m, "SVR\t\t: 0x%x\n", svid);	/* Display cpu Pll setting */	phid1 = mfspr(SPRN_HID1);	seq_printf(m, "PLL setting\t: 0x%x\n", ((phid1 >> 24) & 0x3f));	/* Display the amount of memory */	seq_printf(m, "Memory\t\t: %d MB\n", (int)(binfo->bi_memsize / (1024 * 1024)));	return 0;}void __initmpc834x_sys_init_IRQ(void){	bd_t *binfo = (bd_t *) __res;	u8 senses[8] = {		0,			/* EXT 0 */		IRQ_SENSE_LEVEL,	/* EXT 1 */		IRQ_SENSE_LEVEL,	/* EXT 2 */		0,			/* EXT 3 */#ifdef CONFIG_PCI		IRQ_SENSE_LEVEL,	/* EXT 4 */		IRQ_SENSE_LEVEL,	/* EXT 5 */		IRQ_SENSE_LEVEL,	/* EXT 6 */		IRQ_SENSE_LEVEL,	/* EXT 7 */#else		0,			/* EXT 4 */		0,			/* EXT 5 */		0,			/* EXT 6 */		0,			/* EXT 7 */#endif	};	ipic_init(binfo->bi_immr_base + 0x00700, 0, MPC83xx_IPIC_IRQ_OFFSET, senses, 8);	/* Initialize the default interrupt mapping priorities,	 * in case the boot rom changed something on us.	 */	ipic_set_default_priority();}#if defined(CONFIG_I2C_MPC) && defined(CONFIG_SENSORS_DS1374)extern ulong	ds1374_get_rtc_time(void);extern int	ds1374_set_rtc_time(ulong);static int __initmpc834x_rtc_hookup(void){	struct timespec	tv;	ppc_md.get_rtc_time = ds1374_get_rtc_time;	ppc_md.set_rtc_time = ds1374_set_rtc_time;	tv.tv_nsec = 0;	tv.tv_sec = (ppc_md.get_rtc_time)();	do_settimeofday(&tv);	return 0;}late_initcall(mpc834x_rtc_hookup);#endifstatic __inline__ voidmpc834x_sys_set_bat(void){	/* we steal the lowest ioremap addr for virt space */	mb();	mtspr(SPRN_DBAT1U, VIRT_IMMRBAR | 0x1e);	mtspr(SPRN_DBAT1L, immrbar | 0x2a);	mb();}void __initplatform_init(unsigned long r3, unsigned long r4, unsigned long r5,	      unsigned long r6, unsigned long r7){	bd_t *binfo = (bd_t *) __res;	/* parse_bootinfo must always be called first */	parse_bootinfo(find_bootinfo());	/*	 * If we were passed in a board information, copy it into the	 * residual data area.	 */	if (r3) {		memcpy((void *) __res, (void *) (r3 + KERNELBASE),		       sizeof (bd_t));	}#if defined(CONFIG_BLK_DEV_INITRD)	/*	 * If the init RAM disk has been configured in, and there's a valid	 * starting address for it, set it up.	 */	if (r4) {		initrd_start = r4 + KERNELBASE;		initrd_end = r5 + KERNELBASE;	}#endif /* CONFIG_BLK_DEV_INITRD */	/* Copy the kernel command line arguments to a safe place. */	if (r6) {		*(char *) (r7 + KERNELBASE) = 0;		strcpy(cmd_line, (char *) (r6 + KERNELBASE));	}	immrbar = binfo->bi_immr_base;	mpc834x_sys_set_bat();#if defined(CONFIG_SERIAL_8250) && defined(CONFIG_SERIAL_TEXT_DEBUG)	{		struct uart_port p;		memset(&p, 0, sizeof (p));		p.iotype = UPIO_MEM;		p.membase = (unsigned char __iomem *)(VIRT_IMMRBAR + 0x4500);		p.uartclk = binfo->bi_busfreq;		gen550_init(0, &p);		memset(&p, 0, sizeof (p));		p.iotype = UPIO_MEM;		p.membase = (unsigned char __iomem *)(VIRT_IMMRBAR + 0x4600);		p.uartclk = binfo->bi_busfreq;		gen550_init(1, &p);	}#endif	identify_ppc_sys_by_id(mfspr(SPRN_SVR));	/* setup the PowerPC module struct */	ppc_md.setup_arch = mpc834x_sys_setup_arch;	ppc_md.show_cpuinfo = mpc834x_sys_show_cpuinfo;	ppc_md.init_IRQ = mpc834x_sys_init_IRQ;	ppc_md.get_irq = ipic_get_irq;	ppc_md.restart = mpc83xx_restart;	ppc_md.power_off = mpc83xx_power_off;	ppc_md.halt = mpc83xx_halt;	ppc_md.find_end_of_memory = mpc83xx_find_end_of_memory;	ppc_md.setup_io_mappings  = mpc834x_sys_map_io;	ppc_md.time_init = mpc83xx_time_init;	ppc_md.set_rtc_time = NULL;	ppc_md.get_rtc_time = NULL;	ppc_md.calibrate_decr = mpc83xx_calibrate_decr;	ppc_md.early_serial_map = mpc83xx_early_serial_map;#if defined(CONFIG_SERIAL_8250) && defined(CONFIG_SERIAL_TEXT_DEBUG)	ppc_md.progress = gen550_progress;#endif	/* CONFIG_SERIAL_8250 && CONFIG_SERIAL_TEXT_DEBUG */	if (ppc_md.progress)		ppc_md.progress("mpc834x_sys_init(): exit", 0);	return;}

⌨️ 快捷键说明

复制代码 Ctrl + C
搜索代码 Ctrl + F
全屏模式 F11
切换主题 Ctrl + Shift + D
显示快捷键 ?
增大字号 Ctrl + =
减小字号 Ctrl + -