📄 io.c
字号:
/* * linux/arch/m32r/platforms/m32104ut/io.c * * Typical I/O routines for M32104UT board. * * Copyright (c) 2001-2005 Hiroyuki Kondo, Hirokazu Takata, * Hitoshi Yamamoto, Mamoru Sakugawa, * Naoto Sugai, Hayato Fujiwara */#include <asm/m32r.h>#include <asm/page.h>#include <asm/io.h>#include <asm/byteorder.h>#if defined(CONFIG_PCMCIA) && defined(CONFIG_M32R_CFC)#include <linux/types.h>#define M32R_PCC_IOMAP_SIZE 0x1000#define M32R_PCC_IOSTART0 0x1000#define M32R_PCC_IOEND0 (M32R_PCC_IOSTART0 + M32R_PCC_IOMAP_SIZE - 1)extern void pcc_ioread_byte(int, unsigned long, void *, size_t, size_t, int);extern void pcc_ioread_word(int, unsigned long, void *, size_t, size_t, int);extern void pcc_iowrite_byte(int, unsigned long, void *, size_t, size_t, int);extern void pcc_iowrite_word(int, unsigned long, void *, size_t, size_t, int);#endif /* CONFIG_PCMCIA && CONFIG_M32R_CFC */#define PORT2ADDR(port) _port2addr(port)static inline void *_port2addr(unsigned long port){ return (void *)(port | NONCACHE_OFFSET);}#if defined(CONFIG_IDE) && !defined(CONFIG_M32R_CFC)static inline void *__port2addr_ata(unsigned long port){ static int dummy_reg; switch (port) { case 0x1f0: return (void *)(0x0c002000 | NONCACHE_OFFSET); case 0x1f1: return (void *)(0x0c012800 | NONCACHE_OFFSET); case 0x1f2: return (void *)(0x0c012002 | NONCACHE_OFFSET); case 0x1f3: return (void *)(0x0c012802 | NONCACHE_OFFSET); case 0x1f4: return (void *)(0x0c012004 | NONCACHE_OFFSET); case 0x1f5: return (void *)(0x0c012804 | NONCACHE_OFFSET); case 0x1f6: return (void *)(0x0c012006 | NONCACHE_OFFSET); case 0x1f7: return (void *)(0x0c012806 | NONCACHE_OFFSET); case 0x3f6: return (void *)(0x0c01200e | NONCACHE_OFFSET); default: return (void *)&dummy_reg; }}#endif/* * M32104T-LAN is located in the extended bus space * from 0x01000000 to 0x01ffffff on physical address. * The base address of LAN controller(LAN91C111) is 0x300. */#define LAN_IOSTART (0x300 | NONCACHE_OFFSET)#define LAN_IOEND (0x320 | NONCACHE_OFFSET)static inline void *_port2addr_ne(unsigned long port){ return (void *)(port + NONCACHE_OFFSET + 0x01000000);}static inline void delay(void){ __asm__ __volatile__ ("push r0; \n\t pop r0;" : : :"memory");}/* * NIC I/O function */#define PORT2ADDR_NE(port) _port2addr_ne(port)static inline unsigned char _ne_inb(void *portp){ return *(volatile unsigned char *)portp;}static inline unsigned short _ne_inw(void *portp){ return (unsigned short)le16_to_cpu(*(volatile unsigned short *)portp);}static inline void _ne_insb(void *portp, void *addr, unsigned long count){ unsigned char *buf = (unsigned char *)addr; while (count--) *buf++ = _ne_inb(portp);}static inline void _ne_outb(unsigned char b, void *portp){ *(volatile unsigned char *)portp = b;}static inline void _ne_outw(unsigned short w, void *portp){ *(volatile unsigned short *)portp = cpu_to_le16(w);}unsigned char _inb(unsigned long port){ if (port >= LAN_IOSTART && port < LAN_IOEND) return _ne_inb(PORT2ADDR_NE(port)); return *(volatile unsigned char *)PORT2ADDR(port);}unsigned short _inw(unsigned long port){ if (port >= LAN_IOSTART && port < LAN_IOEND) return _ne_inw(PORT2ADDR_NE(port)); return *(volatile unsigned short *)PORT2ADDR(port);}unsigned long _inl(unsigned long port){ return *(volatile unsigned long *)PORT2ADDR(port);}unsigned char _inb_p(unsigned long port){ unsigned char v = _inb(port); delay(); return (v);}unsigned short _inw_p(unsigned long port){ unsigned short v = _inw(port); delay(); return (v);}unsigned long _inl_p(unsigned long port){ unsigned long v = _inl(port); delay(); return (v);}void _outb(unsigned char b, unsigned long port){ if (port >= LAN_IOSTART && port < LAN_IOEND) _ne_outb(b, PORT2ADDR_NE(port)); else *(volatile unsigned char *)PORT2ADDR(port) = b;}void _outw(unsigned short w, unsigned long port){ if (port >= LAN_IOSTART && port < LAN_IOEND) _ne_outw(w, PORT2ADDR_NE(port)); else *(volatile unsigned short *)PORT2ADDR(port) = w;}void _outl(unsigned long l, unsigned long port){ *(volatile unsigned long *)PORT2ADDR(port) = l;}void _outb_p(unsigned char b, unsigned long port){ _outb(b, port); delay();}void _outw_p(unsigned short w, unsigned long port){ _outw(w, port); delay();}void _outl_p(unsigned long l, unsigned long port){ _outl(l, port); delay();}void _insb(unsigned int port, void *addr, unsigned long count){ if (port >= LAN_IOSTART && port < LAN_IOEND) _ne_insb(PORT2ADDR_NE(port), addr, count); else { unsigned char *buf = addr; unsigned char *portp = PORT2ADDR(port); while (count--) *buf++ = *(volatile unsigned char *)portp; }}void _insw(unsigned int port, void *addr, unsigned long count){ unsigned short *buf = addr; unsigned short *portp; if (port >= LAN_IOSTART && port < LAN_IOEND) { /* * This portion is only used by smc91111.c to read data * from the DATA_REG. Do not swap the data. */ portp = PORT2ADDR_NE(port); while (count--) *buf++ = *(volatile unsigned short *)portp;#if defined(CONFIG_PCMCIA) && defined(CONFIG_M32R_CFC) } else if (port >= M32R_PCC_IOSTART0 && port <= M32R_PCC_IOEND0) { pcc_ioread_word(9, port, (void *)addr, sizeof(unsigned short), count, 1);#endif#if defined(CONFIG_IDE) && !defined(CONFIG_M32R_CFC) } else if ((port >= 0x1f0 && port <=0x1f7) || port == 0x3f6) { portp = __port2addr_ata(port); while (count--) *buf++ = *(volatile unsigned short *)portp;#endif } else { portp = PORT2ADDR(port); while (count--) *buf++ = *(volatile unsigned short *)portp; }}void _insl(unsigned int port, void *addr, unsigned long count){ unsigned long *buf = addr; unsigned long *portp; portp = PORT2ADDR(port); while (count--) *buf++ = *(volatile unsigned long *)portp;}void _outsb(unsigned int port, const void *addr, unsigned long count){ const unsigned char *buf = addr; unsigned char *portp; if (port >= LAN_IOSTART && port < LAN_IOEND) { portp = PORT2ADDR_NE(port); while (count--) _ne_outb(*buf++, portp); } else { portp = PORT2ADDR(port); while (count--) *(volatile unsigned char *)portp = *buf++; }}void _outsw(unsigned int port, const void *addr, unsigned long count){ const unsigned short *buf = addr; unsigned short *portp; if (port >= LAN_IOSTART && port < LAN_IOEND) { /* * This portion is only used by smc91111.c to write data * into the DATA_REG. Do not swap the data. */ portp = PORT2ADDR_NE(port); while (count--) *(volatile unsigned short *)portp = *buf++;#if defined(CONFIG_IDE) && !defined(CONFIG_M32R_CFC) } else if ((port >= 0x1f0 && port <=0x1f7) || port == 0x3f6) { portp = __port2addr_ata(port); while (count--) *(volatile unsigned short *)portp = *buf++;#endif#if defined(CONFIG_PCMCIA) && defined(CONFIG_M32R_CFC) } else if (port >= M32R_PCC_IOSTART0 && port <= M32R_PCC_IOEND0) { pcc_iowrite_word(9, port, (void *)addr, sizeof(unsigned short), count, 1);#endif } else { portp = PORT2ADDR(port); while (count--) *(volatile unsigned short *)portp = *buf++; }}void _outsl(unsigned int port, const void *addr, unsigned long count){ const unsigned long *buf = addr; unsigned char *portp; portp = PORT2ADDR(port); while (count--) *(volatile unsigned long *)portp = *buf++;}
⌨️ 快捷键说明
复制代码
Ctrl + C
搜索代码
Ctrl + F
全屏模式
F11
切换主题
Ctrl + Shift + D
显示快捷键
?
增大字号
Ctrl + =
减小字号
Ctrl + -