📄 ezkit.c
字号:
/* * File: arch/blackfin/mach-bf527/boards/ezkit.c * Based on: arch/blackfin/mach-bf537/boards/stamp.c * Author: Aidan Williams <aidan@nicta.com.au> * * Created: * Description: * * Modified: * Copyright 2005 National ICT Australia (NICTA) * Copyright 2004-2007 Analog Devices Inc. * * Bugs: Enter bugs at http://blackfin.uclinux.org/ * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or * (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, see the file COPYING, or write * to the Free Software Foundation, Inc., * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA */#include <linux/device.h>#include <linux/platform_device.h>#include <linux/mtd/mtd.h>#include <linux/mtd/partitions.h>#include <linux/spi/spi.h>#include <linux/spi/flash.h>#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)#include <linux/usb/isp1362.h>#endif#include <linux/pata_platform.h>#include <linux/irq.h>#include <linux/interrupt.h>#include <linux/usb/sl811.h>#include <asm/cplb.h>#include <asm/dma.h>#include <asm/bfin5xx_spi.h>#include <asm/reboot.h>#include <asm/nand.h>#include <asm/portmux.h>#include <linux/spi/ad7877.h>/* * Name the Board for the /proc/cpuinfo */const char bfin_board_name[] = "ADDS-BF527-EZKIT";/* * Driver needs to know address, irq and flag pin. */#define ISP1761_BASE 0x203C0000#define ISP1761_IRQ IRQ_PF7#if defined(CONFIG_USB_ISP1760_HCD) || defined(CONFIG_USB_ISP1760_HCD_MODULE)static struct resource bfin_isp1761_resources[] = { [0] = { .name = "isp1761-regs", .start = ISP1761_BASE + 0x00000000, .end = ISP1761_BASE + 0x000fffff, .flags = IORESOURCE_MEM, }, [1] = { .start = ISP1761_IRQ, .end = ISP1761_IRQ, .flags = IORESOURCE_IRQ, },};static struct platform_device bfin_isp1761_device = { .name = "isp1761", .id = 0, .num_resources = ARRAY_SIZE(bfin_isp1761_resources), .resource = bfin_isp1761_resources,};static struct platform_device *bfin_isp1761_devices[] = { &bfin_isp1761_device,};int __init bfin_isp1761_init(void){ unsigned int num_devices = ARRAY_SIZE(bfin_isp1761_devices); printk(KERN_INFO "%s(): registering device resources\n", __FUNCTION__); set_irq_type(ISP1761_IRQ, IRQF_TRIGGER_FALLING); return platform_add_devices(bfin_isp1761_devices, num_devices);}void __exit bfin_isp1761_exit(void){ platform_device_unregister(&bfin_isp1761_device);}arch_initcall(bfin_isp1761_init);#endif#if defined(CONFIG_MTD_NAND_BF5XX) || defined(CONFIG_MTD_NAND_BF5XX_MODULE)static struct mtd_partition partition_info[] = { { .name = "Linux Kernel", .offset = 0, .size = 4 * SIZE_1M, }, { .name = "File System", .offset = 4 * SIZE_1M, .size = (256 - 4) * SIZE_1M, },};static struct bf5xx_nand_platform bf5xx_nand_platform = { .page_size = NFC_PG_SIZE_256, .data_width = NFC_NWIDTH_8, .partitions = partition_info, .nr_partitions = ARRAY_SIZE(partition_info), .rd_dly = 3, .wr_dly = 3,};static struct resource bf5xx_nand_resources[] = { { .start = NFC_CTL, .end = NFC_DATA_RD + 2, .flags = IORESOURCE_MEM, }, { .start = CH_NFC, .end = CH_NFC, .flags = IORESOURCE_IRQ, },};static struct platform_device bf5xx_nand_device = { .name = "bf5xx-nand", .id = 0, .num_resources = ARRAY_SIZE(bf5xx_nand_resources), .resource = bf5xx_nand_resources, .dev = { .platform_data = &bf5xx_nand_platform, },};#endif#if defined(CONFIG_BFIN_CFPCMCIA) || defined(CONFIG_BFIN_CFPCMCIA_MODULE)static struct resource bfin_pcmcia_cf_resources[] = { { .start = 0x20310000, /* IO PORT */ .end = 0x20312000, .flags = IORESOURCE_MEM, }, { .start = 0x20311000, /* Attribute Memory */ .end = 0x20311FFF, .flags = IORESOURCE_MEM, }, { .start = IRQ_PF4, .end = IRQ_PF4, .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL, }, { .start = 6, /* Card Detect PF6 */ .end = 6, .flags = IORESOURCE_IRQ, },};static struct platform_device bfin_pcmcia_cf_device = { .name = "bfin_cf_pcmcia", .id = -1, .num_resources = ARRAY_SIZE(bfin_pcmcia_cf_resources), .resource = bfin_pcmcia_cf_resources,};#endif#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)static struct platform_device rtc_device = { .name = "rtc-bfin", .id = -1,};#endif#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)static struct resource smc91x_resources[] = { { .name = "smc91x-regs", .start = 0x20300300, .end = 0x20300300 + 16, .flags = IORESOURCE_MEM, }, { .start = IRQ_PF7, .end = IRQ_PF7, .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL, },};static struct platform_device smc91x_device = { .name = "smc91x", .id = 0, .num_resources = ARRAY_SIZE(smc91x_resources), .resource = smc91x_resources,};#endif#if defined(CONFIG_DM9000) || defined(CONFIG_DM9000_MODULE)static struct resource dm9000_resources[] = { [0] = { .start = 0x203FB800, .end = 0x203FB800 + 8, .flags = IORESOURCE_MEM, }, [1] = { .start = IRQ_PF9, .end = IRQ_PF9, .flags = (IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE), },};static struct platform_device dm9000_device = { .name = "dm9000", .id = -1, .num_resources = ARRAY_SIZE(dm9000_resources), .resource = dm9000_resources,};#endif#if defined(CONFIG_USB_SL811_HCD) || defined(CONFIG_USB_SL811_HCD_MODULE)static struct resource sl811_hcd_resources[] = { { .start = 0x20340000, .end = 0x20340000, .flags = IORESOURCE_MEM, }, { .start = 0x20340004, .end = 0x20340004, .flags = IORESOURCE_MEM, }, { .start = CONFIG_USB_SL811_BFIN_IRQ, .end = CONFIG_USB_SL811_BFIN_IRQ, .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL, },};#if defined(CONFIG_USB_SL811_BFIN_USE_VBUS)void sl811_port_power(struct device *dev, int is_on){ gpio_request(CONFIG_USB_SL811_BFIN_GPIO_VBUS, "usb:SL811_VBUS"); gpio_direction_output(CONFIG_USB_SL811_BFIN_GPIO_VBUS); if (is_on) gpio_set_value(CONFIG_USB_SL811_BFIN_GPIO_VBUS, 1); else gpio_set_value(CONFIG_USB_SL811_BFIN_GPIO_VBUS, 0);}#endifstatic struct sl811_platform_data sl811_priv = { .potpg = 10, .power = 250, /* == 500mA */#if defined(CONFIG_USB_SL811_BFIN_USE_VBUS) .port_power = &sl811_port_power,#endif};static struct platform_device sl811_hcd_device = { .name = "sl811-hcd", .id = 0, .dev = { .platform_data = &sl811_priv, }, .num_resources = ARRAY_SIZE(sl811_hcd_resources), .resource = sl811_hcd_resources,};#endif#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)static struct resource isp1362_hcd_resources[] = { { .start = 0x20360000, .end = 0x20360000, .flags = IORESOURCE_MEM, }, { .start = 0x20360004, .end = 0x20360004, .flags = IORESOURCE_MEM, }, { .start = CONFIG_USB_ISP1362_BFIN_GPIO_IRQ, .end = CONFIG_USB_ISP1362_BFIN_GPIO_IRQ, .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL, },};static struct isp1362_platform_data isp1362_priv = { .sel15Kres = 1, .clknotstop = 0, .oc_enable = 0, .int_act_high = 0, .int_edge_triggered = 0, .remote_wakeup_connected = 0, .no_power_switching = 1, .power_switching_mode = 0,};static struct platform_device isp1362_hcd_device = { .name = "isp1362-hcd", .id = 0, .dev = { .platform_data = &isp1362_priv, }, .num_resources = ARRAY_SIZE(isp1362_hcd_resources), .resource = isp1362_hcd_resources,};#endif#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)static struct platform_device bfin_mac_device = { .name = "bfin_mac",};#endif#if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE)static struct resource net2272_bfin_resources[] = { { .start = 0x20300000, .end = 0x20300000 + 0x100, .flags = IORESOURCE_MEM, }, { .start = IRQ_PF7, .end = IRQ_PF7, .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL, },};static struct platform_device net2272_bfin_device = { .name = "net2272", .id = -1, .num_resources = ARRAY_SIZE(net2272_bfin_resources), .resource = net2272_bfin_resources,};#endif#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)/* all SPI peripherals info goes here */#if defined(CONFIG_MTD_M25P80) \ || defined(CONFIG_MTD_M25P80_MODULE)static struct mtd_partition bfin_spi_flash_partitions[] = { { .name = "bootloader", .size = 0x00020000, .offset = 0, .mask_flags = MTD_CAP_ROM }, { .name = "kernel", .size = 0xe0000, .offset = 0x20000 }, { .name = "file system", .size = 0x700000, .offset = 0x00100000, }};static struct flash_platform_data bfin_spi_flash_data = { .name = "m25p80", .parts = bfin_spi_flash_partitions, .nr_parts = ARRAY_SIZE(bfin_spi_flash_partitions), .type = "m25p64",};/* SPI flash chip (m25p64) */static struct bfin5xx_spi_chip spi_flash_chip_info = { .enable_dma = 0, /* use dma transfer with this chip*/ .bits_per_word = 8,};#endif#if defined(CONFIG_SPI_ADC_BF533) \ || defined(CONFIG_SPI_ADC_BF533_MODULE)/* SPI ADC chip */static struct bfin5xx_spi_chip spi_adc_chip_info = { .enable_dma = 1, /* use dma transfer with this chip*/ .bits_per_word = 16,};#endif#if defined(CONFIG_SND_BLACKFIN_AD1836) \ || defined(CONFIG_SND_BLACKFIN_AD1836_MODULE)static struct bfin5xx_spi_chip ad1836_spi_chip_info = { .enable_dma = 0, .bits_per_word = 16,};#endif#if defined(CONFIG_AD9960) || defined(CONFIG_AD9960_MODULE)static struct bfin5xx_spi_chip ad9960_spi_chip_info = { .enable_dma = 0, .bits_per_word = 16,};#endif#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)static struct bfin5xx_spi_chip spi_mmc_chip_info = {
⌨️ 快捷键说明
复制代码
Ctrl + C
搜索代码
Ctrl + F
全屏模式
F11
切换主题
Ctrl + Shift + D
显示快捷键
?
增大字号
Ctrl + =
减小字号
Ctrl + -