⭐ 欢迎来到虫虫下载站! | 📦 资源下载 📁 资源专辑 ℹ️ 关于我们
⭐ 虫虫下载站

📄 mpc7448_hpc2.c

📁 linux内核源码
💻 C
字号:
/* * mpc7448_hpc2.c * * Board setup routines for the Freescale mpc7448hpc2(taiga) platform * * Author: Jacob Pan *	 jacob.pan@freescale.com * Author: Xianghua Xiao *       x.xiao@freescale.com * Maintainer: Roy Zang <tie-fei.zang@freescale.com> * 	Add Flat Device Tree support fot mpc7448hpc2 board * * Copyright 2004-2006 Freescale Semiconductor, Inc. * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License * as published by the Free Software Foundation; either version * 2 of the License, or (at your option) any later version. */#include <linux/stddef.h>#include <linux/kernel.h>#include <linux/pci.h>#include <linux/kdev_t.h>#include <linux/console.h>#include <linux/delay.h>#include <linux/irq.h>#include <linux/seq_file.h>#include <linux/root_dev.h>#include <linux/serial.h>#include <linux/tty.h>#include <linux/serial_core.h>#include <asm/system.h>#include <asm/time.h>#include <asm/machdep.h>#include <asm/prom.h>#include <asm/udbg.h>#include <asm/tsi108.h>#include <asm/pci-bridge.h>#include <asm/reg.h>#include <mm/mmu_decl.h>#include <asm/tsi108_pci.h>#include <asm/tsi108_irq.h>#include <asm/mpic.h>#undef DEBUG#ifdef DEBUG#define DBG(fmt...) do { printk(fmt); } while(0)#else#define DBG(fmt...) do { } while(0)#endif#define MPC7448HPC2_PCI_CFG_PHYS 0xfb000000extern void _nmask_and_or_msr(unsigned long nmask, unsigned long or_val);int mpc7448_hpc2_exclude_device(struct pci_controller *hose,				u_char bus, u_char devfn){	if (bus == 0 && PCI_SLOT(devfn) == 0)		return PCIBIOS_DEVICE_NOT_FOUND;	else		return PCIBIOS_SUCCESSFUL;}static void __init mpc7448_hpc2_setup_arch(void){	struct device_node *np;	if (ppc_md.progress)		ppc_md.progress("mpc7448_hpc2_setup_arch():set_bridge", 0);	tsi108_csr_vir_base = get_vir_csrbase();	/* setup PCI host bridge */#ifdef CONFIG_PCI	for_each_compatible_node(np, "pci", "tsi108-pci")		tsi108_setup_pci(np, MPC7448HPC2_PCI_CFG_PHYS, 0);	ppc_md.pci_exclude_device = mpc7448_hpc2_exclude_device;	if (ppc_md.progress)		ppc_md.progress("tsi108: resources set", 0x100);#endif	printk(KERN_INFO "MPC7448HPC2 (TAIGA) Platform\n");	printk(KERN_INFO	       "Jointly ported by Freescale and Tundra Semiconductor\n");	printk(KERN_INFO	       "Enabling L2 cache then enabling the HID0 prefetch engine.\n");}/* * Interrupt setup and service.  Interrupts on the mpc7448_hpc2 come * from the four external INT pins, PCI interrupts are routed via * PCI interrupt control registers, it generates internal IRQ23 * * Interrupt routing on the Taiga Board: * TSI108:PB_INT[0] -> CPU0:INT# * TSI108:PB_INT[1] -> CPU0:MCP# * TSI108:PB_INT[2] -> N/C * TSI108:PB_INT[3] -> N/C */static void __init mpc7448_hpc2_init_IRQ(void){	struct mpic *mpic;	phys_addr_t mpic_paddr = 0;	struct device_node *tsi_pic;#ifdef CONFIG_PCI	unsigned int cascade_pci_irq;	struct device_node *tsi_pci;	struct device_node *cascade_node = NULL;#endif	tsi_pic = of_find_node_by_type(NULL, "open-pic");	if (tsi_pic) {		unsigned int size;		const void *prop = of_get_property(tsi_pic, "reg", &size);		mpic_paddr = of_translate_address(tsi_pic, prop);	}	if (mpic_paddr == 0) {		printk("%s: No tsi108 PIC found !\n", __FUNCTION__);		return;	}	DBG("%s: tsi108 pic phys_addr = 0x%x\n", __FUNCTION__,	    (u32) mpic_paddr);	mpic = mpic_alloc(tsi_pic, mpic_paddr,			MPIC_PRIMARY | MPIC_BIG_ENDIAN | MPIC_WANTS_RESET |			MPIC_SPV_EOI | MPIC_NO_PTHROU_DIS | MPIC_REGSET_TSI108,			24,			NR_IRQS-4, /* num_sources used */			"Tsi108_PIC");	BUG_ON(mpic == NULL);	mpic_assign_isu(mpic, 0, mpic_paddr + 0x100);	mpic_init(mpic);#ifdef CONFIG_PCI	tsi_pci = of_find_node_by_type(NULL, "pci");	if (tsi_pci == NULL) {		printk("%s: No tsi108 pci node found !\n", __FUNCTION__);		return;	}	cascade_node = of_find_node_by_type(NULL, "pic-router");	if (cascade_node == NULL) {		printk("%s: No tsi108 pci cascade node found !\n", __FUNCTION__);		return;	}	cascade_pci_irq = irq_of_parse_and_map(tsi_pci, 0);	DBG("%s: tsi108 cascade_pci_irq = 0x%x\n", __FUNCTION__,	    (u32) cascade_pci_irq);	tsi108_pci_int_init(cascade_node);	set_irq_data(cascade_pci_irq, mpic);	set_irq_chained_handler(cascade_pci_irq, tsi108_irq_cascade);#endif	/* Configure MPIC outputs to CPU0 */	tsi108_write_reg(TSI108_MPIC_OFFSET + 0x30c, 0);	of_node_put(tsi_pic);}void mpc7448_hpc2_show_cpuinfo(struct seq_file *m){	seq_printf(m, "vendor\t\t: Freescale Semiconductor\n");	seq_printf(m, "machine\t\t: MPC7448hpc2\n");}void mpc7448_hpc2_restart(char *cmd){	local_irq_disable();	/* Set exception prefix high - to the firmware */	_nmask_and_or_msr(0, MSR_IP);	for (;;) ;		/* Spin until reset happens */}void mpc7448_hpc2_power_off(void){	local_irq_disable();	for (;;) ;		/* No way to shut power off with software */}void mpc7448_hpc2_halt(void){	mpc7448_hpc2_power_off();}/* * Called very early, device-tree isn't unflattened */static int __init mpc7448_hpc2_probe(void){	unsigned long root = of_get_flat_dt_root();	if (!of_flat_dt_is_compatible(root, "mpc74xx"))		return 0;	return 1;}static int mpc7448_machine_check_exception(struct pt_regs *regs){	const struct exception_table_entry *entry;	/* Are we prepared to handle this fault */	if ((entry = search_exception_tables(regs->nip)) != NULL) {		tsi108_clear_pci_cfg_error();		regs->msr |= MSR_RI;		regs->nip = entry->fixup;		return 1;	}	return 0;}define_machine(mpc7448_hpc2){	.name 			= "MPC7448 HPC2",	.probe 			= mpc7448_hpc2_probe,	.setup_arch 		= mpc7448_hpc2_setup_arch,	.init_IRQ 		= mpc7448_hpc2_init_IRQ,	.show_cpuinfo 		= mpc7448_hpc2_show_cpuinfo,	.get_irq 		= mpic_get_irq,	.restart 		= mpc7448_hpc2_restart,	.calibrate_decr 	= generic_calibrate_decr,	.machine_check_exception= mpc7448_machine_check_exception,	.progress 		= udbg_progress,};

⌨️ 快捷键说明

复制代码 Ctrl + C
搜索代码 Ctrl + F
全屏模式 F11
切换主题 Ctrl + Shift + D
显示快捷键 ?
增大字号 Ctrl + =
减小字号 Ctrl + -