⭐ 欢迎来到虫虫下载站! | 📦 资源下载 📁 资源专辑 ℹ️ 关于我们
⭐ 虫虫下载站

📄 lpardata.c

📁 linux内核源码
💻 C
字号:
/* * Copyright 2001 Mike Corrigan, IBM Corp * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License * as published by the Free Software Foundation; either version * 2 of the License, or (at your option) any later version. */#include <linux/types.h>#include <linux/threads.h>#include <linux/module.h>#include <linux/bitops.h>#include <asm/processor.h>#include <asm/ptrace.h>#include <asm/abs_addr.h>#include <asm/lppaca.h>#include <asm/iseries/it_lp_reg_save.h>#include <asm/paca.h>#include <asm/iseries/lpar_map.h>#include <asm/iseries/it_lp_queue.h>#include "naca.h"#include "vpd_areas.h"#include "spcomm_area.h"#include "ipl_parms.h"#include "processor_vpd.h"#include "release_data.h"#include "it_exp_vpd_panel.h"#include "it_lp_naca.h"/* The HvReleaseData is the root of the information shared between * the hypervisor and Linux. */struct HvReleaseData hvReleaseData = {	.xDesc = 0xc8a5d9c4,	/* "HvRD" ebcdic */	.xSize = sizeof(struct HvReleaseData),	.xVpdAreasPtrOffset = offsetof(struct naca_struct, xItVpdAreas),	.xSlicNacaAddr = &naca,		/* 64-bit Naca address */	.xMsNucDataOffset = LPARMAP_PHYS,	.xFlags = HVREL_TAGSINACTIVE	/* tags inactive       */					/* 64 bit              */					/* shared processors   */					/* HMT allowed         */		  | 6,			/* TEMP: This allows non-GA driver */	.xVrmIndex = 4,			/* We are v5r2m0               */	.xMinSupportedPlicVrmIndex = 3,		/* v5r1m0 */	.xMinCompatablePlicVrmIndex = 3,	/* v5r1m0 */	.xVrmName = { 0xd3, 0x89, 0x95, 0xa4,	/* "Linux 2.4.64" ebcdic */		0xa7, 0x40, 0xf2, 0x4b,		0xf4, 0x4b, 0xf6, 0xf4 },};/* * The NACA.  The first dword of the naca is required by the iSeries * hypervisor to point to itVpdAreas.  The hypervisor finds the NACA * through the pointer in hvReleaseData. */struct naca_struct naca = {	.xItVpdAreas = &itVpdAreas,	.xRamDisk = 0,	.xRamDiskSize = 0,};extern void system_reset_iSeries(void);extern void machine_check_iSeries(void);extern void data_access_iSeries(void);extern void instruction_access_iSeries(void);extern void hardware_interrupt_iSeries(void);extern void alignment_iSeries(void);extern void program_check_iSeries(void);extern void fp_unavailable_iSeries(void);extern void decrementer_iSeries(void);extern void trap_0a_iSeries(void);extern void trap_0b_iSeries(void);extern void system_call_iSeries(void);extern void single_step_iSeries(void);extern void trap_0e_iSeries(void);extern void performance_monitor_iSeries(void);extern void data_access_slb_iSeries(void);extern void instruction_access_slb_iSeries(void);struct ItLpNaca itLpNaca = {	.xDesc = 0xd397d581,		/* "LpNa" ebcdic */	.xSize = 0x0400,		/* size of ItLpNaca */	.xIntHdlrOffset = 0x0300,	/* offset to int array */	.xMaxIntHdlrEntries = 19,	/* # ents */	.xPrimaryLpIndex = 0,		/* Part # of primary */	.xServiceLpIndex = 0,		/* Part # of serv */	.xLpIndex = 0,			/* Part # of me */	.xMaxLpQueues = 0,		/* # of LP queues */	.xLpQueueOffset = 0x100,	/* offset of start of LP queues */	.xPirEnvironMode = 0,		/* Piranha stuff */	.xPirConsoleMode = 0,	.xPirDasdMode = 0,	.flags = 0,	.xSpVpdFormat = 0,	.xIntProcRatio = 0,	.xPlicVrmIndex = 0,		/* VRM index of PLIC */	.xMinSupportedSlicVrmInd = 0,	/* min supported SLIC */	.xMinCompatableSlicVrmInd = 0,	/* min compat SLIC */	.xLoadAreaAddr = 0,		/* 64-bit addr of load area */	.xLoadAreaChunks = 0,		/* chunks for load area */	.xPaseSysCallCRMask = 0,	/* PASE mask */	.xSlicSegmentTablePtr = 0,	/* seg table */	.xOldLpQueue = { 0 },		/* Old LP Queue */	.xInterruptHdlr = {		(u64)system_reset_iSeries,	/* 0x100 System Reset */		(u64)machine_check_iSeries,	/* 0x200 Machine Check */		(u64)data_access_iSeries,	/* 0x300 Data Access */		(u64)instruction_access_iSeries, /* 0x400 Instruction Access */		(u64)hardware_interrupt_iSeries, /* 0x500 External */		(u64)alignment_iSeries,		/* 0x600 Alignment */		(u64)program_check_iSeries,	/* 0x700 Program Check */		(u64)fp_unavailable_iSeries,	/* 0x800 FP Unavailable */		(u64)decrementer_iSeries,	/* 0x900 Decrementer */		(u64)trap_0a_iSeries,		/* 0xa00 Trap 0A */		(u64)trap_0b_iSeries,		/* 0xb00 Trap 0B */		(u64)system_call_iSeries,	/* 0xc00 System Call */		(u64)single_step_iSeries,	/* 0xd00 Single Step */		(u64)trap_0e_iSeries,		/* 0xe00 Trap 0E */		(u64)performance_monitor_iSeries,/* 0xf00 Performance Monitor */		0,				/* int 0x1000 */		0,				/* int 0x1010 */		0,				/* int 0x1020 CPU ctls */		(u64)hardware_interrupt_iSeries, /* SC Ret Hdlr */		(u64)data_access_slb_iSeries,	/* 0x380 D-SLB */		(u64)instruction_access_slb_iSeries /* 0x480 I-SLB */	}};/* May be filled in by the hypervisor so cannot end up in the BSS */struct ItIplParmsReal xItIplParmsReal __attribute__((__section__(".data")));/* May be filled in by the hypervisor so cannot end up in the BSS */struct ItExtVpdPanel xItExtVpdPanel __attribute__((__section__(".data")));#define maxPhysicalProcessors 32struct IoHriProcessorVpd xIoHriProcessorVpd[maxPhysicalProcessors] = {	{		.xInstCacheOperandSize = 32,		.xDataCacheOperandSize = 32,		.xProcFreq     = 50000000,		.xTimeBaseFreq = 50000000,		.xPVR = 0x3600	}};/* Space for Main Store Vpd 27,200 bytes *//* May be filled in by the hypervisor so cannot end up in the BSS */u64    xMsVpd[3400] __attribute__((__section__(".data")));/* Space for Recovery Log Buffer *//* May be filled in by the hypervisor so cannot end up in the BSS */u64    xRecoveryLogBuffer[32] __attribute__((__section__(".data")));struct SpCommArea xSpCommArea = {	.xDesc = 0xE2D7C3C2,	.xFormat = 1,};/* The LparMap data is now located at offset 0x6000 in head.S * It was put there so that the HvReleaseData could address it * with a 32-bit offset as required by the iSeries hypervisor * * The Naca has a pointer to the ItVpdAreas.  The hypervisor finds * the Naca via the HvReleaseData area.  The HvReleaseData has the * offset into the Naca of the pointer to the ItVpdAreas. */struct ItVpdAreas itVpdAreas = {	.xSlicDesc = 0xc9a3e5c1,		/* "ItVA" */	.xSlicSize = sizeof(struct ItVpdAreas),	.xSlicVpdEntries = ItVpdMaxEntries,	/* # VPD array entries */	.xSlicDmaEntries = ItDmaMaxEntries,	/* # DMA array entries */	.xSlicMaxLogicalProcs = NR_CPUS * 2,	/* Max logical procs */	.xSlicMaxPhysicalProcs = maxPhysicalProcessors,	/* Max physical procs */	.xSlicDmaToksOffset = offsetof(struct ItVpdAreas, xPlicDmaToks),	.xSlicVpdAdrsOffset = offsetof(struct ItVpdAreas, xSlicVpdAdrs),	.xSlicDmaLensOffset = offsetof(struct ItVpdAreas, xPlicDmaLens),	.xSlicVpdLensOffset = offsetof(struct ItVpdAreas, xSlicVpdLens),	.xSlicMaxSlotLabels = 0,		/* max slot labels */	.xSlicMaxLpQueues = 1,			/* max LP queues */	.xPlicDmaLens = { 0 },			/* DMA lengths */	.xPlicDmaToks = { 0 },			/* DMA tokens */	.xSlicVpdLens = {			/* VPD lengths */	        0,0,0,		        /*  0 - 2 */		sizeof(xItExtVpdPanel), /*       3 Extended VPD   */		sizeof(struct paca_struct),	/*       4 length of Paca  */		0,			/*       5 */		sizeof(struct ItIplParmsReal),/* 6 length of IPL parms */		26992,			/*	 7 length of MS VPD */		0,			/*       8 */		sizeof(struct ItLpNaca),/*       9 length of LP Naca */		0,			/*	10 */		256,			/*	11 length of Recovery Log Buf */		sizeof(struct SpCommArea), /*   12 length of SP Comm Area */		0,0,0,			/* 13 - 15 */		sizeof(struct IoHriProcessorVpd),/* 16 length of Proc Vpd */		0,0,0,0,0,0,		/* 17 - 22  */		sizeof(struct hvlpevent_queue),	/* 23 length of Lp Queue */		0,0			/* 24 - 25 */		},	.xSlicVpdAdrs = {			/* VPD addresses */		0,0,0,			/*	 0 -  2 */		&xItExtVpdPanel,        /*       3 Extended VPD */		&paca[0],		/*       4 first Paca */		0,			/*       5 */		&xItIplParmsReal,	/*	 6 IPL parms */		&xMsVpd,		/*	 7 MS Vpd */		0,			/*       8 */		&itLpNaca,		/*       9 LpNaca */		0,			/*	10 */		&xRecoveryLogBuffer,	/*	11 Recovery Log Buffer */		&xSpCommArea,		/*	12 SP Comm Area */		0,0,0,			/* 13 - 15 */		&xIoHriProcessorVpd,	/*      16 Proc Vpd */		0,0,0,0,0,0,		/* 17 - 22 */		&hvlpevent_queue,	/*      23 Lp Queue */		0,0	}};struct ItLpRegSave iseries_reg_save[] = {	[0 ... (NR_CPUS-1)] = {		.xDesc = 0xd397d9e2,	/* "LpRS" */		.xSize = sizeof(struct ItLpRegSave),	},};

⌨️ 快捷键说明

复制代码 Ctrl + C
搜索代码 Ctrl + F
全屏模式 F11
切换主题 Ctrl + Shift + D
显示快捷键 ?
增大字号 Ctrl + =
减小字号 Ctrl + -