⭐ 欢迎来到虫虫下载站! | 📦 资源下载 📁 资源专辑 ℹ️ 关于我们
⭐ 虫虫下载站

📄 setup.c

📁 linux内核源码
💻 C
字号:
/* *  Maple (970 eval board) setup code * *  (c) Copyright 2004 Benjamin Herrenschmidt (benh@kernel.crashing.org), *                     IBM Corp.  * *  This program is free software; you can redistribute it and/or *  modify it under the terms of the GNU General Public License *  as published by the Free Software Foundation; either version *  2 of the License, or (at your option) any later version. * */#undef DEBUG#include <linux/init.h>#include <linux/errno.h>#include <linux/sched.h>#include <linux/kernel.h>#include <linux/mm.h>#include <linux/stddef.h>#include <linux/unistd.h>#include <linux/ptrace.h>#include <linux/slab.h>#include <linux/user.h>#include <linux/a.out.h>#include <linux/tty.h>#include <linux/string.h>#include <linux/delay.h>#include <linux/ioport.h>#include <linux/major.h>#include <linux/initrd.h>#include <linux/vt_kern.h>#include <linux/console.h>#include <linux/pci.h>#include <linux/adb.h>#include <linux/cuda.h>#include <linux/pmu.h>#include <linux/irq.h>#include <linux/seq_file.h>#include <linux/root_dev.h>#include <linux/serial.h>#include <linux/smp.h>#include <linux/bitops.h>#include <asm/processor.h>#include <asm/sections.h>#include <asm/prom.h>#include <asm/system.h>#include <asm/pgtable.h>#include <asm/io.h>#include <asm/kexec.h>#include <asm/pci-bridge.h>#include <asm/iommu.h>#include <asm/machdep.h>#include <asm/dma.h>#include <asm/cputable.h>#include <asm/time.h>#include <asm/of_device.h>#include <asm/lmb.h>#include <asm/mpic.h>#include <asm/rtas.h>#include <asm/udbg.h>#include <asm/nvram.h>#include "maple.h"#ifdef DEBUG#define DBG(fmt...) udbg_printf(fmt)#else#define DBG(fmt...)#endifstatic unsigned long maple_find_nvram_base(void){	struct device_node *rtcs;	unsigned long result = 0;	/* find NVRAM device */	rtcs = of_find_compatible_node(NULL, "nvram", "AMD8111");	if (rtcs) {		struct resource r;		if (of_address_to_resource(rtcs, 0, &r)) {			printk(KERN_EMERG "Maple: Unable to translate NVRAM"			       " address\n");			goto bail;		}		if (!(r.flags & IORESOURCE_IO)) {			printk(KERN_EMERG "Maple: NVRAM address isn't PIO!\n");			goto bail;		}		result = r.start;	} else		printk(KERN_EMERG "Maple: Unable to find NVRAM\n"); bail:	of_node_put(rtcs);	return result;}static void maple_restart(char *cmd){	unsigned int maple_nvram_base;	const unsigned int *maple_nvram_offset, *maple_nvram_command;	struct device_node *sp;	maple_nvram_base = maple_find_nvram_base();	if (maple_nvram_base == 0)		goto fail;	/* find service processor device */	sp = of_find_node_by_name(NULL, "service-processor");	if (!sp) {		printk(KERN_EMERG "Maple: Unable to find Service Processor\n");		goto fail;	}	maple_nvram_offset = of_get_property(sp, "restart-addr", NULL);	maple_nvram_command = of_get_property(sp, "restart-value", NULL);	of_node_put(sp);	/* send command */	outb_p(*maple_nvram_command, maple_nvram_base + *maple_nvram_offset);	for (;;) ; fail:	printk(KERN_EMERG "Maple: Manual Restart Required\n");}static void maple_power_off(void){	unsigned int maple_nvram_base;	const unsigned int *maple_nvram_offset, *maple_nvram_command;	struct device_node *sp;	maple_nvram_base = maple_find_nvram_base();	if (maple_nvram_base == 0)		goto fail;	/* find service processor device */	sp = of_find_node_by_name(NULL, "service-processor");	if (!sp) {		printk(KERN_EMERG "Maple: Unable to find Service Processor\n");		goto fail;	}	maple_nvram_offset = of_get_property(sp, "power-off-addr", NULL);	maple_nvram_command = of_get_property(sp, "power-off-value", NULL);	of_node_put(sp);	/* send command */	outb_p(*maple_nvram_command, maple_nvram_base + *maple_nvram_offset);	for (;;) ; fail:	printk(KERN_EMERG "Maple: Manual Power-Down Required\n");}static void maple_halt(void){	maple_power_off();}#ifdef CONFIG_SMPstruct smp_ops_t maple_smp_ops = {	.probe		= smp_mpic_probe,	.message_pass	= smp_mpic_message_pass,	.kick_cpu	= smp_generic_kick_cpu,	.setup_cpu	= smp_mpic_setup_cpu,	.give_timebase	= smp_generic_give_timebase,	.take_timebase	= smp_generic_take_timebase,};#endif /* CONFIG_SMP */static void __init maple_use_rtas_reboot_and_halt_if_present(void){	if (rtas_service_present("system-reboot") &&	    rtas_service_present("power-off")) {		ppc_md.restart = rtas_restart;		ppc_md.power_off = rtas_power_off;		ppc_md.halt = rtas_halt;	}}void __init maple_setup_arch(void){	/* init to some ~sane value until calibrate_delay() runs */	loops_per_jiffy = 50000000;	/* Setup SMP callback */#ifdef CONFIG_SMP	smp_ops = &maple_smp_ops;#endif	/* Lookup PCI hosts */       	maple_pci_init();#ifdef CONFIG_DUMMY_CONSOLE	conswitchp = &dummy_con;#endif	maple_use_rtas_reboot_and_halt_if_present();	printk(KERN_DEBUG "Using native/NAP idle loop\n");	mmio_nvram_init();}/*  * Early initialization. */static void __init maple_init_early(void){	DBG(" -> maple_init_early\n");	iommu_init_early_dart();	DBG(" <- maple_init_early\n");}/* * This is almost identical to pSeries and CHRP. We need to make that * code generic at one point, with appropriate bits in the device-tree to * identify the presence of an HT APIC */static void __init maple_init_IRQ(void){	struct device_node *root, *np, *mpic_node = NULL;	const unsigned int *opprop;	unsigned long openpic_addr = 0;	int naddr, n, i, opplen, has_isus = 0;	struct mpic *mpic;	unsigned int flags = MPIC_PRIMARY;	/* Locate MPIC in the device-tree. Note that there is a bug	 * in Maple device-tree where the type of the controller is	 * open-pic and not interrupt-controller	 */	for_each_node_by_type(np, "interrupt-controller")		if (of_device_is_compatible(np, "open-pic")) {			mpic_node = np;			break;		}	if (mpic_node == NULL)		for_each_node_by_type(np, "open-pic") {			mpic_node = np;			break;		}	if (mpic_node == NULL) {		printk(KERN_ERR		       "Failed to locate the MPIC interrupt controller\n");		return;	}	/* Find address list in /platform-open-pic */	root = of_find_node_by_path("/");	naddr = of_n_addr_cells(root);	opprop = of_get_property(root, "platform-open-pic", &opplen);	if (opprop != 0) {		openpic_addr = of_read_number(opprop, naddr);		has_isus = (opplen > naddr);		printk(KERN_DEBUG "OpenPIC addr: %lx, has ISUs: %d\n",		       openpic_addr, has_isus);	}	BUG_ON(openpic_addr == 0);	/* Check for a big endian MPIC */	if (of_get_property(np, "big-endian", NULL) != NULL)		flags |= MPIC_BIG_ENDIAN;	/* XXX Maple specific bits */	flags |= MPIC_U3_HT_IRQS | MPIC_WANTS_RESET;	/* All U3/U4 are big-endian, older SLOF firmware doesn't encode this */	flags |= MPIC_BIG_ENDIAN;	/* Setup the openpic driver. More device-tree junks, we hard code no	 * ISUs for now. I'll have to revisit some stuffs with the folks doing	 * the firmware for those	 */	mpic = mpic_alloc(mpic_node, openpic_addr, flags,			  /*has_isus ? 16 :*/ 0, 0, " MPIC     ");	BUG_ON(mpic == NULL);	/* Add ISUs */	opplen /= sizeof(u32);	for (n = 0, i = naddr; i < opplen; i += naddr, n++) {		unsigned long isuaddr = of_read_number(opprop + i, naddr);		mpic_assign_isu(mpic, n, isuaddr);	}	/* All ISUs are setup, complete initialization */	mpic_init(mpic);	ppc_md.get_irq = mpic_get_irq;	of_node_put(mpic_node);	of_node_put(root);}static void __init maple_progress(char *s, unsigned short hex){	printk("*** %04x : %s\n", hex, s ? s : "");}/* * Called very early, MMU is off, device-tree isn't unflattened */static int __init maple_probe(void){	unsigned long root = of_get_flat_dt_root();	if (!of_flat_dt_is_compatible(root, "Momentum,Maple") &&	    !of_flat_dt_is_compatible(root, "Momentum,Apache"))		return 0;	/*	 * On U3, the DART (iommu) must be allocated now since it	 * has an impact on htab_initialize (due to the large page it	 * occupies having to be broken up so the DART itself is not	 * part of the cacheable linar mapping	 */	alloc_dart_table();	hpte_init_native();	return 1;}define_machine(maple_md) {	.name			= "Maple",	.probe			= maple_probe,	.setup_arch		= maple_setup_arch,	.init_early		= maple_init_early,	.init_IRQ		= maple_init_IRQ,	.pci_irq_fixup		= maple_pci_irq_fixup,	.pci_get_legacy_ide_irq	= maple_pci_get_legacy_ide_irq,	.restart		= maple_restart,	.power_off		= maple_power_off,	.halt			= maple_halt,       	.get_boot_time		= maple_get_boot_time,       	.set_rtc_time		= maple_set_rtc_time,       	.get_rtc_time		= maple_get_rtc_time,      	.calibrate_decr		= generic_calibrate_decr,	.progress		= maple_progress,	.power_save		= power4_idle,#ifdef CONFIG_KEXEC	.machine_kexec		= default_machine_kexec,	.machine_kexec_prepare	= default_machine_kexec_prepare,	.machine_crash_shutdown	= default_machine_crash_shutdown,#endif};

⌨️ 快捷键说明

复制代码 Ctrl + C
搜索代码 Ctrl + F
全屏模式 F11
切换主题 Ctrl + Shift + D
显示快捷键 ?
增大字号 Ctrl + =
减小字号 Ctrl + -