⭐ 欢迎来到虫虫下载站! | 📦 资源下载 📁 资源专辑 ℹ️ 关于我们
⭐ 虫虫下载站

📄 mpc836x_mds.c

📁 linux内核源码
💻 C
字号:
/* * Copyright (C) Freescale Semicondutor, Inc. 2006. All rights reserved. * * Author: Li Yang <LeoLi@freescale.com> *	   Yin Olivia <Hong-hua.Yin@freescale.com> * * Description: * MPC8360E MDS board specific routines. * * Changelog: * Jun 21, 2006	Initial version * * This program is free software; you can redistribute it and/or modify it * under  the terms of  the GNU General  Public License as published by the * Free Software Foundation;  either version 2 of the  License, or (at your * option) any later version. */#include <linux/stddef.h>#include <linux/kernel.h>#include <linux/init.h>#include <linux/errno.h>#include <linux/reboot.h>#include <linux/pci.h>#include <linux/kdev_t.h>#include <linux/major.h>#include <linux/console.h>#include <linux/delay.h>#include <linux/seq_file.h>#include <linux/root_dev.h>#include <linux/initrd.h>#include <asm/of_device.h>#include <asm/of_platform.h>#include <asm/system.h>#include <asm/atomic.h>#include <asm/time.h>#include <asm/io.h>#include <asm/machdep.h>#include <asm/ipic.h>#include <asm/irq.h>#include <asm/prom.h>#include <asm/udbg.h>#include <sysdev/fsl_soc.h>#include <asm/qe.h>#include <asm/qe_ic.h>#include "mpc83xx.h"#undef DEBUG#ifdef DEBUG#define DBG(fmt...) udbg_printf(fmt)#else#define DBG(fmt...)#endifstatic u8 *bcsr_regs = NULL;/* ************************************************************************ * * Setup the architecture * */static void __init mpc836x_mds_setup_arch(void){	struct device_node *np;	if (ppc_md.progress)		ppc_md.progress("mpc836x_mds_setup_arch()", 0);	/* Map BCSR area */	np = of_find_node_by_name(NULL, "bcsr");	if (np != 0) {		struct resource res;		of_address_to_resource(np, 0, &res);		bcsr_regs = ioremap(res.start, res.end - res.start +1);		of_node_put(np);	}#ifdef CONFIG_PCI	for_each_compatible_node(np, "pci", "fsl,mpc8349-pci")		mpc83xx_add_bridge(np);#endif#ifdef CONFIG_QUICC_ENGINE	qe_reset();	if ((np = of_find_node_by_name(NULL, "par_io")) != NULL) {		par_io_init(np);		of_node_put(np);		for (np = NULL; (np = of_find_node_by_name(np, "ucc")) != NULL;)			par_io_of_config(np);	}	if ((np = of_find_compatible_node(NULL, "network", "ucc_geth"))			!= NULL){		uint svid;		/* Reset the Ethernet PHY */#define BCSR9_GETHRST 0x20		clrbits8(&bcsr_regs[9], BCSR9_GETHRST);		udelay(1000);		setbits8(&bcsr_regs[9], BCSR9_GETHRST);		/* handle mpc8360ea rev.2.1 erratum 2: RGMII Timing */		svid = mfspr(SPRN_SVR);		if (svid == 0x80480021) {			void __iomem *immap;			immap = ioremap(get_immrbase() + 0x14a8, 8);			/*			 * IMMR + 0x14A8[4:5] = 11 (clk delay for UCC 2)			 * IMMR + 0x14A8[18:19] = 11 (clk delay for UCC 1)			 */			setbits32(immap, 0x0c003000);			/*			 * IMMR + 0x14AC[20:27] = 10101010			 * (data delay for both UCC's)			 */			clrsetbits_be32(immap + 4, 0xff0, 0xaa0);			iounmap(immap);		}		iounmap(bcsr_regs);		of_node_put(np);	}#endif				/* CONFIG_QUICC_ENGINE */}static struct of_device_id mpc836x_ids[] = {	{ .type = "soc", },	{ .compatible = "soc", },	{ .type = "qe", },	{},};static int __init mpc836x_declare_of_platform_devices(void){	if (!machine_is(mpc836x_mds))		return 0;	/* Publish the QE devices */	of_platform_bus_probe(NULL, mpc836x_ids, NULL);	return 0;}device_initcall(mpc836x_declare_of_platform_devices);static void __init mpc836x_mds_init_IRQ(void){	struct device_node *np;	np = of_find_node_by_type(NULL, "ipic");	if (!np)		return;	ipic_init(np, 0);	/* Initialize the default interrupt mapping priorities,	 * in case the boot rom changed something on us.	 */	ipic_set_default_priority();	of_node_put(np);#ifdef CONFIG_QUICC_ENGINE	np = of_find_node_by_type(NULL, "qeic");	if (!np)		return;	qe_ic_init(np, 0, qe_ic_cascade_low_ipic, qe_ic_cascade_high_ipic);	of_node_put(np);#endif				/* CONFIG_QUICC_ENGINE */}/* * Called very early, MMU is off, device-tree isn't unflattened */static int __init mpc836x_mds_probe(void){        unsigned long root = of_get_flat_dt_root();        return of_flat_dt_is_compatible(root, "MPC836xMDS");}define_machine(mpc836x_mds) {	.name		= "MPC836x MDS",	.probe		= mpc836x_mds_probe,	.setup_arch	= mpc836x_mds_setup_arch,	.init_IRQ	= mpc836x_mds_init_IRQ,	.get_irq	= ipic_get_irq,	.restart	= mpc83xx_restart,	.time_init	= mpc83xx_time_init,	.calibrate_decr	= generic_calibrate_decr,	.progress	= udbg_progress,};

⌨️ 快捷键说明

复制代码 Ctrl + C
搜索代码 Ctrl + F
全屏模式 F11
切换主题 Ctrl + Shift + D
显示快捷键 ?
增大字号 Ctrl + =
减小字号 Ctrl + -