⭐ 欢迎来到虫虫下载站! | 📦 资源下载 📁 资源专辑 ℹ️ 关于我们
⭐ 虫虫下载站

📄 gpio_mdio.c

📁 linux内核源码
💻 C
字号:
/* * Copyright (C) 2006-2007 PA Semi, Inc * * Author: Olof Johansson, PA Semi * * Maintained by: Olof Johansson <olof@lixom.net> * * Based on drivers/net/fs_enet/mii-bitbang.c. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA */#include <linux/io.h>#include <linux/module.h>#include <linux/types.h>#include <linux/sched.h>#include <linux/errno.h>#include <linux/ioport.h>#include <linux/interrupt.h>#include <linux/phy.h>#include <linux/platform_device.h>#include <asm/of_platform.h>#define DELAY 1static void __iomem *gpio_regs;struct gpio_priv {	int mdc_pin;	int mdio_pin;};#define MDC_PIN(bus)	(((struct gpio_priv *)bus->priv)->mdc_pin)#define MDIO_PIN(bus)	(((struct gpio_priv *)bus->priv)->mdio_pin)static inline void mdio_lo(struct mii_bus *bus){	out_le32(gpio_regs+0x10, 1 << MDIO_PIN(bus));}static inline void mdio_hi(struct mii_bus *bus){	out_le32(gpio_regs, 1 << MDIO_PIN(bus));}static inline void mdc_lo(struct mii_bus *bus){	out_le32(gpio_regs+0x10, 1 << MDC_PIN(bus));}static inline void mdc_hi(struct mii_bus *bus){	out_le32(gpio_regs, 1 << MDC_PIN(bus));}static inline void mdio_active(struct mii_bus *bus){	out_le32(gpio_regs+0x20, (1 << MDC_PIN(bus)) | (1 << MDIO_PIN(bus)));}static inline void mdio_tristate(struct mii_bus *bus){	out_le32(gpio_regs+0x30, (1 << MDIO_PIN(bus)));}static inline int mdio_read(struct mii_bus *bus){	return !!(in_le32(gpio_regs+0x40) & (1 << MDIO_PIN(bus)));}static void clock_out(struct mii_bus *bus, int bit){	if (bit)		mdio_hi(bus);	else		mdio_lo(bus);	udelay(DELAY);	mdc_hi(bus);	udelay(DELAY);	mdc_lo(bus);}/* Utility to send the preamble, address, and register (common to read and write). */static void bitbang_pre(struct mii_bus *bus, int read, u8 addr, u8 reg){	int i;	/* CFE uses a really long preamble (40 bits). We'll do the same. */	mdio_active(bus);	for (i = 0; i < 40; i++) {		clock_out(bus, 1);	}	/* send the start bit (01) and the read opcode (10) or write (10) */	clock_out(bus, 0);	clock_out(bus, 1);	clock_out(bus, read);	clock_out(bus, !read);	/* send the PHY address */	for (i = 0; i < 5; i++) {		clock_out(bus, (addr & 0x10) != 0);		addr <<= 1;	}	/* send the register address */	for (i = 0; i < 5; i++) {		clock_out(bus, (reg & 0x10) != 0);		reg <<= 1;	}}static int gpio_mdio_read(struct mii_bus *bus, int phy_id, int location){	u16 rdreg;	int ret, i;	u8 addr = phy_id & 0xff;	u8 reg = location & 0xff;	bitbang_pre(bus, 1, addr, reg);	/* tri-state our MDIO I/O pin so we can read */	mdio_tristate(bus);	udelay(DELAY);	mdc_hi(bus);	udelay(DELAY);	mdc_lo(bus);	/* read 16 bits of register data, MSB first */	rdreg = 0;	for (i = 0; i < 16; i++) {		mdc_lo(bus);		udelay(DELAY);		mdc_hi(bus);		udelay(DELAY);		mdc_lo(bus);		udelay(DELAY);		rdreg <<= 1;		rdreg |= mdio_read(bus);	}	mdc_hi(bus);	udelay(DELAY);	mdc_lo(bus);	udelay(DELAY);	ret = rdreg;	return ret;}static int gpio_mdio_write(struct mii_bus *bus, int phy_id, int location, u16 val){	int i;	u8 addr = phy_id & 0xff;	u8 reg = location & 0xff;	u16 value = val & 0xffff;	bitbang_pre(bus, 0, addr, reg);	/* send the turnaround (10) */	mdc_lo(bus);	mdio_hi(bus);	udelay(DELAY);	mdc_hi(bus);	udelay(DELAY);	mdc_lo(bus);	mdio_lo(bus);	udelay(DELAY);	mdc_hi(bus);	udelay(DELAY);	/* write 16 bits of register data, MSB first */	for (i = 0; i < 16; i++) {		mdc_lo(bus);		if (value & 0x8000)			mdio_hi(bus);		else			mdio_lo(bus);		udelay(DELAY);		mdc_hi(bus);		udelay(DELAY);		value <<= 1;	}	/*	 * Tri-state the MDIO line.	 */	mdio_tristate(bus);	mdc_lo(bus);	udelay(DELAY);	mdc_hi(bus);	udelay(DELAY);	return 0;}static int gpio_mdio_reset(struct mii_bus *bus){	/*nothing here - dunno how to reset it*/	return 0;}static int __devinit gpio_mdio_probe(struct of_device *ofdev,				     const struct of_device_id *match){	struct device *dev = &ofdev->dev;	struct device_node *np = ofdev->node;	struct device_node *gpio_np;	struct mii_bus *new_bus;	struct resource res;	struct gpio_priv *priv;	const unsigned int *prop;	int err = 0;	int i;	gpio_np = of_find_compatible_node(NULL, "gpio", "1682m-gpio");	if (!gpio_np)		return -ENODEV;	err = of_address_to_resource(gpio_np, 0, &res);	of_node_put(gpio_np);	if (err)		return -EINVAL;	if (!gpio_regs)		gpio_regs = ioremap(res.start, 0x100);	if (!gpio_regs)		return -EPERM;	priv = kzalloc(sizeof(struct gpio_priv), GFP_KERNEL);	if (priv == NULL)		return -ENOMEM;	new_bus = kzalloc(sizeof(struct mii_bus), GFP_KERNEL);	if (new_bus == NULL)		return -ENOMEM;	new_bus->name = "pasemi gpio mdio bus",	new_bus->read = &gpio_mdio_read,	new_bus->write = &gpio_mdio_write,	new_bus->reset = &gpio_mdio_reset,	prop = of_get_property(np, "reg", NULL);	new_bus->id = *prop;	new_bus->priv = priv;	new_bus->phy_mask = 0;	new_bus->irq = kmalloc(sizeof(int)*PHY_MAX_ADDR, GFP_KERNEL);	for(i = 0; i < PHY_MAX_ADDR; ++i)		new_bus->irq[i] = irq_create_mapping(NULL, 10);	prop = of_get_property(np, "mdc-pin", NULL);	priv->mdc_pin = *prop;	prop = of_get_property(np, "mdio-pin", NULL);	priv->mdio_pin = *prop;	new_bus->dev = dev;	dev_set_drvdata(dev, new_bus);	err = mdiobus_register(new_bus);	if (0 != err) {		printk(KERN_ERR "%s: Cannot register as MDIO bus, err %d\n",				new_bus->name, err);		goto bus_register_fail;	}	return 0;bus_register_fail:	kfree(new_bus);	return err;}static int gpio_mdio_remove(struct of_device *dev){	struct mii_bus *bus = dev_get_drvdata(&dev->dev);	mdiobus_unregister(bus);	dev_set_drvdata(&dev->dev, NULL);	kfree(bus->priv);	bus->priv = NULL;	kfree(bus);	return 0;}static struct of_device_id gpio_mdio_match[] ={	{		.compatible      = "gpio-mdio",	},	{},};static struct of_platform_driver gpio_mdio_driver ={	.match_table	= gpio_mdio_match,	.probe		= gpio_mdio_probe,	.remove		= gpio_mdio_remove,	.driver		= {		.name	= "gpio-mdio-bitbang",	},};int gpio_mdio_init(void){	return of_register_platform_driver(&gpio_mdio_driver);}void gpio_mdio_exit(void){	of_unregister_platform_driver(&gpio_mdio_driver);}device_initcall(gpio_mdio_init);

⌨️ 快捷键说明

复制代码 Ctrl + C
搜索代码 Ctrl + F
全屏模式 F11
切换主题 Ctrl + Shift + D
显示快捷键 ?
增大字号 Ctrl + =
减小字号 Ctrl + -