apr_thread_pool.h

Apache官方在今天放出产品系列2.2的最新版本2.2.11的源码包 最流行的HTTP服务器软件之一

/*
 * Licensed to the Apache Software Foundation (ASF) under one or more
 * contributor license agreements.  See the NOTICE file distributed
 * with this work for additional information regarding copyright
 * ownership.  The ASF licenses this file to you under the Apache
 * License, Version 2.0 (the "License"); you may not use this file
 * except in compliance with the License.  You may obtain a copy of
 * the License at
 *
 *     http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or
 * implied.  See the License for the specific language governing
 * permissions and limitations under the License.
 */

#ifndef APU_THREAD_POOL_H
#define APU_THREAD_POOL_H

#include "apu.h"
#include "apr_thread_proc.h"

/**
 * @file apr_thread_pool.h
 * @brief APR Thread Pool Library

 * @remarks This library implements a thread pool using apr_thread_t. A thread
 * pool is a set of threads that can be created in advance or on demand until a
 * maximum number. When a task is scheduled, the thread pool will find an idle
 * thread to handle the task. In case all existing threads are busy and the
 * number of tasks in the queue is higher than the adjustable threshold, the
 * pool will try to create a new thread to serve the task if the maximum number
 * has not been reached. Otherwise, the task will be put into a queue based on
 * priority, which can be valued from 0 to 255, with higher values being served
 * first. If there are tasks with the same priority, the new task might be put at
 * the top or at the bottom - it depends on which function is used to put the task.
 *
 * @remarks There may be the case where the thread pool can use up to the maximum
 * number of threads at peak load, but having those threads idle afterwards. A
 * maximum number of idle threads can be set so that the extra idling threads will
 * be terminated to save system resources.
 */
#if APR_HAS_THREADS

#ifdef __cplusplus
extern "C" {
#endif /* __cplusplus */

/**
 * @defgroup APR_Util_TP Thread Pool routines
 * @ingroup APR_Util
 * @{
 */

/** Opaque Thread Pool structure. */
typedef struct apr_thread_pool apr_thread_pool_t;

#define APR_THREAD_TASK_PRIORITY_LOWEST 0
#define APR_THREAD_TASK_PRIORITY_LOW 63
#define APR_THREAD_TASK_PRIORITY_NORMAL 127
#define APR_THREAD_TASK_PRIORITY_HIGH 191
#define APR_THREAD_TASK_PRIORITY_HIGHEST 255

/**
 * Create a thread pool
 * @param me The pointer in which to return the newly created apr_thread_pool
 * object, or NULL if thread pool creation fails.
 * @param init_threads The number of threads to be created initially, this number
 * will also be used as the initial value for the maximum number of idle threads.
 * @param max_threads The maximum number of threads that can be created
 * @param pool The pool to use
 * @return APR_SUCCESS if the thread pool was created successfully. Otherwise,
 * the error code.
 */
APU_DECLARE(apr_status_t) apr_thread_pool_create(apr_thread_pool_t **me,
                                                 apr_size_t init_threads,
                                                 apr_size_t max_threads,
                                                 apr_pool_t *pool);

/**
 * Destroy the thread pool and stop all the threads
 * @return APR_SUCCESS if all threads are stopped.
 */
APU_DECLARE(apr_status_t) apr_thread_pool_destroy(apr_thread_pool_t *me);

/**
 * Schedule a task to the bottom of the tasks of same priority.
 * @param me The thread pool
 * @param func The task function
 * @param param The parameter for the task function
 * @param priority The priority of the task.
 * @param owner Owner of this task.
 * @return APR_SUCCESS if the task had been scheduled successfully
 */
APU_DECLARE(apr_status_t) apr_thread_pool_push(apr_thread_pool_t *me,
                                               apr_thread_start_t func,
                                               void *param,
                                               apr_byte_t priority,
                                               void *owner);
/**
 * Schedule a task to be run after a delay
 * @param me The thread pool
 * @param func The task function
 * @param param The parameter for the task function
 * @param time Time in microseconds
 * @param owner Owner of this task.
 * @return APR_SUCCESS if the task had been scheduled successfully
 */
APU_DECLARE(apr_status_t) apr_thread_pool_schedule(apr_thread_pool_t *me,
                                                   apr_thread_start_t func,
                                                   void *param,
                                                   apr_interval_time_t time,
                                                   void *owner);

/**
 * Schedule a task to the top of the tasks of same priority.
 * @param me The thread pool
 * @param func The task function
 * @param param The parameter for the task function
 * @param priority The priority of the task.
 * @param owner Owner of this task.
 * @return APR_SUCCESS if the task had been scheduled successfully
 */
APU_DECLARE(apr_status_t) apr_thread_pool_top(apr_thread_pool_t *me,
                                              apr_thread_start_t func,
                                              void *param,
                                              apr_byte_t priority,
                                              void *owner);

/**
 * Cancel tasks submitted by the owner. If there is any task from the owner that
 * is currently running, the function will spin until the task finished.
 * @param me The thread pool
 * @param owner Owner of the task
 * @return APR_SUCCESS if the task has been cancelled successfully
 * @note The task function should not be calling cancel, otherwise the function
 * may get stuck forever. The function assert if it detect such a case.
 */
APU_DECLARE(apr_status_t) apr_thread_pool_tasks_cancel(apr_thread_pool_t *me,
                                                       void *owner);

/**
 * Get the current number of tasks waiting in the queue
 * @param me The thread pool
 * @return Number of tasks in the queue
 */
APU_DECLARE(apr_size_t) apr_thread_pool_tasks_count(apr_thread_pool_t *me);

/**
 * Get the current number of scheduled tasks waiting in the queue
 * @param me The thread pool
 * @return Number of scheduled tasks in the queue
 */
APU_DECLARE(apr_size_t) apr_thread_pool_scheduled_tasks_count(apr_thread_pool_t *me);

/**
 * Get the current number of threads
 * @param me The thread pool
 * @return Total number of threads
 */
APU_DECLARE(apr_size_t) apr_thread_pool_threads_count(apr_thread_pool_t *me);

/**
 * Get the current number of busy threads
 * @param me The thread pool
 * @return Number of busy threads
 */
APU_DECLARE(apr_size_t) apr_thread_pool_busy_count(apr_thread_pool_t *me);

/**
 * Get the current number of idle threads
 * @param me The thread pool
 * @return Number of idle threads
 */
APU_DECLARE(apr_size_t) apr_thread_pool_idle_count(apr_thread_pool_t *me);

/**
 * Access function for the maximum number of idle threads. Number of current
 * idle threads will be reduced to the new limit.
 * @param me The thread pool
 * @param cnt The number
 * @return The number of threads that were stopped.
 */
APU_DECLARE(apr_size_t) apr_thread_pool_idle_max_set(apr_thread_pool_t *me,
                                                     apr_size_t cnt);

/**
 * Get number of tasks that have run
 * @param me The thread pool
 * @return Number of tasks that have run
 */
APU_DECLARE(apr_size_t)
    apr_thread_pool_tasks_run_count(apr_thread_pool_t * me);

/**
 * Get high water mark of the number of tasks waiting to run
 * @param me The thread pool
 * @return High water mark of tasks waiting to run
 */
APU_DECLARE(apr_size_t)
    apr_thread_pool_tasks_high_count(apr_thread_pool_t * me);

/**
 * Get high water mark of the number of threads
 * @param me The thread pool
 * @return High water mark of threads in thread pool
 */
APU_DECLARE(apr_size_t)
    apr_thread_pool_threads_high_count(apr_thread_pool_t * me);

/**
 * Get the number of idle threads that were destroyed after timing out
 * @param me The thread pool
 * @return Number of idle threads that timed out
 */
APU_DECLARE(apr_size_t)
    apr_thread_pool_threads_idle_timeout_count(apr_thread_pool_t * me);

/**
 * Access function for the maximum number of idle threads
 * @param me The thread pool
 * @return The current maximum number
 */
APU_DECLARE(apr_size_t) apr_thread_pool_idle_max_get(apr_thread_pool_t *me);

/**
 * Access function for the maximum number of threads.
 * @param me The thread pool
 * @param cnt Number of threads
 * @return The original maximum number of threads
 */
APU_DECLARE(apr_size_t) apr_thread_pool_thread_max_set(apr_thread_pool_t *me,
                                                       apr_size_t cnt);

/**
 * Access function for the maximum wait time (in microseconds) of an
 * idling thread that exceeds the maximum number of idling threads.
 * A non-zero value allows for the reaping of idling threads to shrink
 * over time.  Which helps reduce thrashing.
 * @param me The thread pool
 * @param timeout The number of microseconds an idle thread should wait
 * till it reaps itself
 * @return The original maximum wait time
 */
APU_DECLARE(apr_interval_time_t)
    apr_thread_pool_idle_wait_set(apr_thread_pool_t * me,
                                  apr_interval_time_t timeout);

/**
 * Access function for the maximum wait time (in microseconds) of an
 * idling thread that exceeds the maximum number of idling threads
 * @param me The thread pool
 * @return The current maximum wait time
 */
APU_DECLARE(apr_interval_time_t)
    apr_thread_pool_idle_wait_get(apr_thread_pool_t * me);

/**
 * Access function for the maximum number of threads
 * @param me The thread pool
 * @return The current maximum number
 */
APU_DECLARE(apr_size_t) apr_thread_pool_thread_max_get(apr_thread_pool_t *me);

/**
 * Access function for the threshold of tasks in queue to trigger a new thread.
 * @param me The thread pool
 * @param cnt The new threshold
 * @return The original threshold
 */
APU_DECLARE(apr_size_t) apr_thread_pool_threshold_set(apr_thread_pool_t *me,
                                                      apr_size_t val);

/**
 * Access function for the threshold of tasks in queue to trigger a new thread.
 * @param me The thread pool
 * @return The current threshold
 */
APU_DECLARE(apr_size_t) apr_thread_pool_threshold_get(apr_thread_pool_t * me);

/**
 * Get owner of the task currently been executed by the thread.
 * @param thd The thread is executing a task
 * @param owner Pointer to receive owner of the task.
 * @return APR_SUCCESS if the owner is retrieved successfully
 */
APU_DECLARE(apr_status_t) apr_thread_pool_task_owner_get(apr_thread_t *thd,
                                                         void **owner);

/** @} */

#ifdef __cplusplus
}
#endif

#endif /* APR_HAS_THREADS */
#endif /* !APR_THREAD_POOL_H */