makefile.in

来自「Amarok是一款在LINUX或其他类UNIX操作系统中运行的音频播放器软件。 」· IN 代码 · 共 2,015 行 · 第 1/5 页

	  f=$(am__strip_dir) \
	  echo " $(xdg_appsDATA_INSTALL) '$$d$$p' '$(DESTDIR)$(xdg_appsdir)/$$f'"; \
	  $(xdg_appsDATA_INSTALL) "$$d$$p" "$(DESTDIR)$(xdg_appsdir)/$$f"; \
	done

uninstall-xdg_appsDATA:
	@$(NORMAL_UNINSTALL)
	@list='$(xdg_apps_DATA)'; for p in $$list; do \
	  f=$(am__strip_dir) \
	  echo " rm -f '$(DESTDIR)$(xdg_appsdir)/$$f'"; \
	  rm -f "$(DESTDIR)$(xdg_appsdir)/$$f"; \
	done

# This directory's subdirectories are mostly independent; you can cd
# into them and run `make' without going through this Makefile.
# To change the values of `make' variables: instead of editing Makefiles,
# (1) if the variable is set in `config.status', edit `config.status'
#     (which will cause the Makefiles to be regenerated when you run `make');
# (2) otherwise, pass the desired values on the `make' command line.
$(RECURSIVE_TARGETS):
	@failcom='exit 1'; \
	for f in x $$MAKEFLAGS; do \
	  case $$f in \
	    *=* | --[!k]*);; \
	    *k*) failcom='fail=yes';; \
	  esac; \
	done; \
	dot_seen=no; \
	target=`echo $@ | sed s/-recursive//`; \
	list='$(SUBDIRS)'; for subdir in $$list; do \
	  echo "Making $$target in $$subdir"; \
	  if test "$$subdir" = "."; then \
	    dot_seen=yes; \
	    local_target="$$target-am"; \
	  else \
	    local_target="$$target"; \
	  fi; \
	  (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
	  || eval $$failcom; \
	done; \
	if test "$$dot_seen" = "no"; then \
	  $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
	fi; test -z "$$fail"

$(RECURSIVE_CLEAN_TARGETS):
	@failcom='exit 1'; \
	for f in x $$MAKEFLAGS; do \
	  case $$f in \
	    *=* | --[!k]*);; \
	    *k*) failcom='fail=yes';; \
	  esac; \
	done; \
	dot_seen=no; \
	case "$@" in \
	  distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
	  *) list='$(SUBDIRS)' ;; \
	esac; \
	rev=''; for subdir in $$list; do \
	  if test "$$subdir" = "."; then :; else \
	    rev="$$subdir $$rev"; \
	  fi; \
	done; \
	rev="$$rev ."; \
	target=`echo $@ | sed s/-recursive//`; \
	for subdir in $$rev; do \
	  echo "Making $$target in $$subdir"; \
	  if test "$$subdir" = "."; then \
	    local_target="$$target-am"; \
	  else \
	    local_target="$$target"; \
	  fi; \
	  (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
	  || eval $$failcom; \
	done && test -z "$$fail"
tags-recursive:
	list='$(SUBDIRS)'; for subdir in $$list; do \
	  test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
	done
ctags-recursive:
	list='$(SUBDIRS)'; for subdir in $$list; do \
	  test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
	done

ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
	list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
	unique=`for i in $$list; do \
	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
	  done | \
	  $(AWK) '    { files[$$0] = 1; } \
	       END { for (i in files) print i; }'`; \
	mkid -fID $$unique
tags: TAGS

TAGS: tags-recursive $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
		$(TAGS_FILES) $(LISP)
	tags=; \
	here=`pwd`; \
	if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
	  include_option=--etags-include; \
	  empty_fix=.; \
	else \
	  include_option=--include; \
	  empty_fix=; \
	fi; \
	list='$(SUBDIRS)'; for subdir in $$list; do \
	  if test "$$subdir" = .; then :; else \
	    test ! -f $$subdir/TAGS || \
	      tags="$$tags $$include_option=$$here/$$subdir/TAGS"; \
	  fi; \
	done; \
	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
	unique=`for i in $$list; do \
	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
	  done | \
	  $(AWK) '    { files[$$0] = 1; } \
	       END { for (i in files) print i; }'`; \
	if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
	  test -n "$$unique" || unique=$$empty_fix; \
	  $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
	    $$tags $$unique; \
	fi
ctags: CTAGS
CTAGS: ctags-recursive $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
		$(TAGS_FILES) $(LISP)
	tags=; \
	here=`pwd`; \
	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
	unique=`for i in $$list; do \
	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
	  done | \
	  $(AWK) '    { files[$$0] = 1; } \
	       END { for (i in files) print i; }'`; \
	test -z "$(CTAGS_ARGS)$$tags$$unique" \
	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
	     $$tags $$unique

GTAGS:
	here=`$(am__cd) $(top_builddir) && pwd` \
	  && cd $(top_srcdir) \
	  && gtags -i $(GTAGS_ARGS) $$here

distclean-tags:
	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags

distdir: $(DISTFILES)
	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
	list='$(DISTFILES)'; \
	  dist_files=`for file in $$list; do echo $$file; done | \
	  sed -e "s|^$$srcdirstrip/||;t" \
	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
	case $$dist_files in \
	  */*) $(MKDIR_P) `echo "$$dist_files" | \
			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
			   sort -u` ;; \
	esac; \
	for file in $$dist_files; do \
	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
	  if test -d $$d/$$file; then \
	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
	      cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
	    fi; \
	    cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
	  else \
	    test -f $(distdir)/$$file \
	    || cp -p $$d/$$file $(distdir)/$$file \
	    || exit 1; \
	  fi; \
	done
	list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
	  if test "$$subdir" = .; then :; else \
	    test -d "$(distdir)/$$subdir" \
	    || $(MKDIR_P) "$(distdir)/$$subdir" \
	    || exit 1; \
	    distdir=`$(am__cd) $(distdir) && pwd`; \
	    top_distdir=`$(am__cd) $(top_distdir) && pwd`; \
	    (cd $$subdir && \
	      $(MAKE) $(AM_MAKEFLAGS) \
	        top_distdir="$$top_distdir" \
	        distdir="$$distdir/$$subdir" \
		am__remove_distdir=: \
		am__skip_length_check=: \
	        distdir) \
	      || exit 1; \
	  fi; \
	done
check-am: all-am
check: check-recursive
all-am: Makefile $(LTLIBRARIES) $(PROGRAMS) $(SCRIPTS) $(DATA)
install-binPROGRAMS: install-libLTLIBRARIES

installdirs: installdirs-recursive
installdirs-am:
	for dir in "$(DESTDIR)$(libdir)" "$(DESTDIR)$(bindir)" "$(DESTDIR)$(bindir)" "$(DESTDIR)$(configdir)" "$(DESTDIR)$(kde_servicetypesdir)" "$(DESTDIR)$(profiledatadir)" "$(DESTDIR)$(protocoldir)" "$(DESTDIR)$(rcdir)" "$(DESTDIR)$(servicemenudir)" "$(DESTDIR)$(xdg_appsdir)"; do \
	  test -z "$$dir" || $(MKDIR_P) "$$dir"; \
	done
install: install-recursive
install-exec: install-exec-recursive
install-data: install-data-recursive
uninstall: uninstall-recursive

install-am: all-am
	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am

installcheck: installcheck-recursive
install-strip:
	$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
	  install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
	  `test -z '$(STRIP)' || \
	    echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
mostlyclean-generic:

clean-generic:

distclean-generic:
	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)

maintainer-clean-generic:
	@echo "This command is intended for maintainers to use"
	@echo "it deletes files that may require special tools to rebuild."
#>- clean: clean-recursive
#>+ 1
clean: kde-rpo-clean  clean-recursive

#>- clean-am: clean-binPROGRAMS clean-generic clean-libLTLIBRARIES \
#>- 	clean-libtool mostlyclean-am
#>+ 2
clean-am: clean-metasources clean-ui clean-bcheck clean-final  clean-binPROGRAMS clean-generic clean-libLTLIBRARIES \
	clean-libtool mostlyclean-am

distclean: distclean-recursive
	-rm -rf ./$(DEPDIR)
	-rm -f Makefile
distclean-am: clean-am distclean-compile distclean-generic \
	distclean-tags

dvi: dvi-recursive

dvi-am:

html: html-recursive

info: info-recursive

info-am:

#>- install-data-am: install-configDATA install-kde_servicetypesDATA \
#>- 	install-profiledataDATA install-protocolDATA install-rcDATA \
#>- 	install-servicemenuDATA install-xdg_appsDATA
#>+ 3
install-data-am: install-kde-icons  install-configDATA install-kde_servicetypesDATA \
	install-profiledataDATA install-protocolDATA install-rcDATA \
	install-servicemenuDATA install-xdg_appsDATA

install-dvi: install-dvi-recursive

install-exec-am: install-binPROGRAMS install-binSCRIPTS \
	install-libLTLIBRARIES
	@$(NORMAL_INSTALL)
	$(MAKE) $(AM_MAKEFLAGS) install-exec-hook

install-html: install-html-recursive

install-info: install-info-recursive

install-man:

install-pdf: install-pdf-recursive

install-ps: install-ps-recursive

installcheck-am:

maintainer-clean: maintainer-clean-recursive
	-rm -rf ./$(DEPDIR)
	-rm -f Makefile
maintainer-clean-am: distclean-am maintainer-clean-generic

mostlyclean: mostlyclean-recursive

mostlyclean-am: mostlyclean-compile mostlyclean-generic \
	mostlyclean-libtool

pdf: pdf-recursive

pdf-am:

ps: ps-recursive

ps-am:

#>- uninstall-am: uninstall-binPROGRAMS uninstall-binSCRIPTS \
#>- 	uninstall-configDATA uninstall-kde_servicetypesDATA \
#>- 	uninstall-libLTLIBRARIES uninstall-profiledataDATA \
#>- 	uninstall-protocolDATA uninstall-rcDATA \
#>- 	uninstall-servicemenuDATA uninstall-xdg_appsDATA
#>+ 5
uninstall-am: uninstall-kde-icons  uninstall-binPROGRAMS uninstall-binSCRIPTS \
	uninstall-configDATA uninstall-kde_servicetypesDATA \
	uninstall-libLTLIBRARIES uninstall-profiledataDATA \
	uninstall-protocolDATA uninstall-rcDATA \
	uninstall-servicemenuDATA uninstall-xdg_appsDATA

.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) install-am \
	install-exec-am install-strip

.PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \
	all all-am check check-am clean clean-binPROGRAMS \
	clean-generic clean-libLTLIBRARIES clean-libtool ctags \
	ctags-recursive distclean distclean-compile distclean-generic \
	distclean-libtool distclean-tags distdir dvi dvi-am html \
	html-am info info-am install install-am install-binPROGRAMS \
	install-binSCRIPTS install-configDATA install-data \
	install-data-am install-dvi install-dvi-am install-exec \
	install-exec-am install-exec-hook install-html install-html-am \
	install-info install-info-am install-kde_servicetypesDATA \
	install-libLTLIBRARIES install-man install-pdf install-pdf-am \
	install-profiledataDATA install-protocolDATA install-ps \
	install-ps-am install-rcDATA install-servicemenuDATA \
	install-strip install-xdg_appsDATA installcheck \
	installcheck-am installdirs installdirs-am maintainer-clean \
	maintainer-clean-generic mostlyclean mostlyclean-compile \
	mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \
	tags tags-recursive uninstall uninstall-am \
	uninstall-binPROGRAMS uninstall-binSCRIPTS \
	uninstall-configDATA uninstall-kde_servicetypesDATA \
	uninstall-libLTLIBRARIES uninstall-profiledataDATA \
	uninstall-protocolDATA uninstall-rcDATA \
	uninstall-servicemenuDATA uninstall-xdg_appsDATA


messages: rc.cpp
	$(EXTRACTRC) `find . -name "*.rc" -o -name "*.ui" -o -name "*.kcfg"` > rc.cpp
	LIST=`find . -name \*.h -o -name \*.hh -o -name \*.H -o -name \*.hxx -o -name \*.hpp -o -name \*.cpp -o -name \*.cc -o -name \*.cxx -o -name \*.ecpp -o -name \*.C`; \
	if test -n "$$LIST"; then \
		$(XGETTEXT) $$LIST -o $(podir)/amarok.pot; \
	fi

install-exec-hook:
	@echo ""
	@echo "=========================="
	@echo "=  Amarok - INSTALLED  ================================"
	@echo "=========================="
	@echo "="
	@echo "=  Type amarok to start!"
	@echo "="
	@echo "=  If you have problems, please consult the README;"
	@echo "=  if the problems continue join us on #amarok."
	@echo "="
	@echo "======================================================="
# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT:

#>+ 3
playlistbrowser.moc: $(srcdir)/playlistbrowser.h
	$(MOC) $(srcdir)/playlistbrowser.h -o playlistbrowser.moc

#>+ 2
mocs: playlistbrowser.moc

#>+ 3
browserbar.moc: $(srcdir)/browserbar.h
	$(MOC) $(srcdir)/browserbar.h -o browserbar.moc

#>+ 2
mocs: browserbar.moc

#>+ 3
statistics.moc: $(srcdir)/statistics.h
	$(MOC) $(srcdir)/statistics.h -o statistics.moc

#>+ 2
mocs: statistics.moc

#>+ 3
hintlineedit.moc: $(srcdir)/hintlineedit.h
	$(MOC) $(srcdir)/hintlineedit.h -o hintlineedit.moc

#>+ 2
mocs: hintlineedit.moc

#>+ 3
moodbar.moc: $(srcdir)/moodbar.h
	$(MOC) $(srcdir)/moodbar.h -o moodbar.moc

#>+ 2
mocs: moodbar.moc

#>+ 3
mediabrowser.moc: $(srcdir)/mediabrowser.h
	$(MOC) $(srcdir)/mediabrowser.h -o mediabrowser.moc

#>+ 2
mocs: mediabrowser.moc

#>+ 3
devicemanager.moc: $(srcdir)/devicemanager.h
	$(MOC) $(srcdir)/devicemanager.h -o devicemanager.moc

#>+ 2
mocs: devicemanager.moc