exmple_1_opt.bak

一个用MCU将SHARP 遥控码转为NEC码的小程序

### uVision2 Project, (C) Keil Software
### Do not modify !

 cExt (*.c)
 aExt (*.s*; *.src; *.a*)
 oExt (*.obj)
 lExt (*.lib)
 tExt (*.txt; *.h; *.inc)
 pExt (*.plm)
 CppX (*.cpp)
 DaveTm { 0,0,0,0,0,0,0,0 }

Target (Target 1), 0x0000 // Tools: 'MCS-51'
GRPOPT 1,(Source Group 1),1,0,0

OPTFFF 1,1,1,0,0,0,0,0,<.\main.c><main.c> 
OPTFFF 1,2,2,0,0,0,0,0,<.\STARTUP.A51><STARTUP.A51> 
OPTFFF 1,3,1,0,0,0,0,0,<.\function.c><function.c> 
OPTFFF 1,4,1,0,0,0,0,0,<.\int_timer.c><int_timer.c> 
OPTFFF 1,5,1,570425344,0,0,0,0,<.\ir_send.c><ir_send.c> 


TARGOPT 1, (Target 1)
 CLK51=12000000
  OPTTT 1,1,1,0
  OPTHX 0,65535,0,0,0
  OPTLX 120,65,8,<.\>
  OPTOX 16
  OPTLT 1,1,1,0,1,1,0,1,0,0,0,0
  OPTXL 1,1,1,1,1,1,1,0,0
  OPTFL 1,0,1
  OPTBL 0,(Data Sheet)<DATASHTS\ATMEL\DOC0851.PDF>
  OPTBL 1,(Add on databooks)<DATASHTS\ADDBOOKS.PDF>
  OPTBL 2,(Instruction Set Manual)<DATASHTS\ATMEL\DOC0509.PDF>
  OPTDL (S8051.DLL)()(DP51.DLL)(-pAT52)(S8051.DLL)()(TP51.DLL)(-pAT52)
  OPTDBG 44030,-1,()()()()()()()()()() (C:\KEIL\VW_C.DLL)()()()
  OPTKEY 0,(DLGTP51)((98=-1,-1,-1,-1,0)(82=-1,-1,-1,-1,0)(83=240,191,438,273,0)(84=-1,-1,-1,-1,0)(85=-1,-1,-1,-1,0)(3003=-1,-1,-1,-1,0)(91=-1,-1,-1,-1,0)(92=-1,-1,-1,-1,0)(94=-1,-1,-1,-1,0)(5023=-1,-1,-1,-1,0))
  OPTKEY 0,(VW_C)()
  OPTKEY 0,(DLGDP51)((98=-1,-1,-1,-1,0)(82=-1,-1,-1,-1,0)(83=-1,-1,-1,-1,0)(84=-1,-1,-1,-1,0)(85=-1,-1,-1,-1,0)(3003=-1,-1,-1,-1,0)(91=-1,-1,-1,-1,0)(92=-1,-1,-1,-1,0)(94=-1,-1,-1,-1,0)(5023=-1,-1,-1,-1,0))
  OPTBB 0,0,164,1,0,0,0,0,0,0,<ir_send.c>()()
  OPTBB 1,0,46,1,0,0,0,0,0,0,<main.c>()()
  OPTBB 2,0,20,1,0,0,0,0,0,0,<ir_send.c>()()
  OPTBB 3,0,14,1,0,0,0,0,0,0,<EXMPLE_1.C>()()
  OPTBB 4,0,19,1,0,0,0,0,0,0,<exmple_1.c>()()
  OPTBB 5,0,45,1,0,0,0,0,0,0,<exmple_1.c>()()
  OPTBB 6,0,8,1,0,0,0,0,0,0,<exmple_1.c>()()
  OPTBB 7,0,18,1,0,0,0,0,0,0,<exmple_1.c>()()
  OPTDF 0x86
  OPTLE <>
  OPTLC <>
EndOpt