hometuf.mnu

用来计算建筑施工中的土方计算

//
//      AutoCAD 2004 Menu
//
//      Copyright (C) 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1994, 1996, 1997, 
//      1998, 1999, 2000, 2001, 2002, 2003 by Autodesk, Inc.
//
//      Permission to use, copy, modify, and distribute this software
//      for any purpose and without fee is hereby granted, provided that
//      the above copyright notice appears in all copies and that both
//      the copyright notice and the limited warranty and restricted rights
//      notice below appear in all supporting documentation.
//
//      AUTODESK, INC. PROVIDES THIS PROGRAM "AS IS" AND WITH ALL FAULTS.
//      AUTODESK, INC. SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTY OF
//      MERCHANTABILITY OR FITNESS FOR A PARTICULAR USE.  AUTODESK, INC.
//      DOES NOT WARRANT THAT THE OPERATION OF THE PROGRAM WILL BE
//      UNINTERRUPTED OR ERROR FREE.
//
//      Use, duplication, or disclosure by the U.S. Government is subject to
//      restrictions set forth in FAR 52.227-19 (Commercial Computer
//      Software - Restricted Rights) and DFAR 252.227-7013(c)(1)(ii)
//      (Rights in Technical Data and Computer Software), as applicable.
//
//
//      NOTE:  AutoCAD looks for an ".mnl" (Menu Lisp) file whose name is
//             the same as that of the menu file, and loads it if
//             found.  If you modify this menu and change its name, you
//             should copy HomeTuF.mnl to <yourname>.mnl, since the menu
//             relies on AutoLISP routines found there.
//

//
//      Default AutoCAD NAMESPACE declaration:
//
***MENUGROUP=HomeTuF

//
//   Begin AutoCAD Digitizer Button Menus
//
***BUTTONS1
// Simple + button
// if a grip is hot bring up the Grips Cursor Menu (POP 500), else send a carriage return
// If the SHORTCUTMENU sysvar is not 0 the first item (for button 1) is NOT USED.
$M=$(if,$(eq,$(substr,$(getvar,cmdnames),1,5),GRIP_),$P0=HomeTuF.GRIPS $P0=*);
$P0=SNAP $p0=*
^C^C
^B
^O
^G
^D
^E
^T

***BUTTONS2
// Shift + button
$P0=SNAP $p0=*

***BUTTONS3
// Control + button

***BUTTONS4
// Control + shift + button

//
//   Begin System Pointing Device Menus
//
***AUX1
// Simple button
// if a grip is hot bring up the Grips Cursor Menu (POP 500), else send a carriage return
// If the SHORTCUTMENU sysvar is not 0 the first item (for button 1, the "right button")
// is NOT USED.
$M=$(if,$(eq,$(substr,$(getvar,cmdnames),1,5),GRIP_),$P0=HomeTuF.GRIPS $P0=*);
$P0=SNAP $p0=*
^C^C
^B
^O
^G
^D
^E
^T


***AUX2
// Shift + button
$P0=SNAP $p0=*
$P0=SNAP $p0=*

***AUX3
// Control + button
$P0=Layer $p0=*

***AUX4
// Control + shift + button
$P0=Layer $p0=*

//
//   Begin AutoCAD Pull-down Menus
//
***POP0
**SNAP
// Shift-right-click if using the default AUX2 and/or BUTTONS2
// menus.
             [对象捕捉光标菜单(&O)]
ID_Tracking  [临时追踪点(&K)]_tt
ID_From      [自(&F)]_from
ID_MnPointFi [->点过滤器(&T)]
ID_PointFilx   [.X].X
ID_PointFily   [.Y].Y
ID_PointFilz   [.Z].Z
         [--]
ID_PointFixy   [.XY].XY
ID_PointFixz   [.XZ].XZ
ID_PointFiyz   [<-.YZ].YZ
             [--]
ID_OsnapEndp [端点(&E)]_endp
ID_OsnapMidp [中点(&M)]_mid
ID_OsnapInte [交点(&I)]_int
ID_OsnapAppa [外观交点(&A)]_appint
ID_OsnapExte [延长线(&X)]_ext
             [--]
ID_OsnapCent [圆心(&C)]_cen
ID_OsnapQuad [象限点(&Q)]_qua
ID_OsnapTang [切点(&G)]_tan
             [--]
ID_OsnapPerp [垂足(&P)]_per
ID_OsnapPara [平行线(&L)]_par
ID_OsnapNode [节点(&D)]_nod
ID_OsnapInse [插入点(&S)]_ins
ID_OsnapNear [最近点(&R)]_nea
ID_OsnapNone [无(&N)]_non
             [--]
ID_Osnap     [对象捕捉设置(&O)...]'_+dsettings 2



**Layer 
[--]
ID_OnallLayer			     [显示全部层]^C^C^P_ONALLLAYER
ID_OnoneLayer			     [显示指定层]^C^C^P_ONONELAYER
ID_OffoneLayer			     [关闭指定层]^C^C^P_OFFONELAYER
ID_SeloneLayer			     [设定当前层]^C^C^P_SELONELAYER
ID_UniteLayer			     [合并相关层]^C^C^P_UNITELAYER
ID_DecomposeLayer		     [分解相关层]^C^C^P_DECOMPOSELAYER
ID_DeleteLayer			     [删除指定层]^C^C^P_DELETELAYER
ID_MemoryLayer			     [层显示记忆]^C^C^P_MEMORYLAYER



***POP1
**FILE
ID_MnFile    [文件(&F)]
ID_New       [新建(&N)...\tCtrl+N]^C^C_new
ID_Open      [打开(&O)...\tCtrl+O]^C^C_open
ID_DWG_CLOSE [关闭(&C)]^C^C_close
ID_PartialOp [$(if,$(eq,$(getvar,fullopen),0),,~)局部加载(&L)]^C^C_partiaload
             [--]
ID_Save      [保存(&S)\tCtrl+S]^C^C_qsave
ID_Saveas    [另存为(&A)...\tCtrl+Shift+S]^C^C_saveas
ID_ETransmit [电子传递(&T)...]^C^C_etransmit
ID_Publish   [网上发布(&W)...]^C^C_publishtoweb
ID_Export    [输出(&E)...]^C^C_export
             [--]
ID_PlotSetup [页面设置(&G)...]^C^C_pagesetup
ID_PlotMgr   [打印机管理器(&M)...]^C^C_plottermanager
ID_PlotStyMgr [打印样式管理器(&Y)...]^C^C_stylesmanager
ID_Preview   [打印预览(&V)]^C^C_preview
ID_Print     [打印(&P)...\tCtrl+P]^C^C_plot
ID_Pub       [发布(&H)...]^C^C_publish
             [--]
ID_MnDrawing [->绘图实用程序(&U)]
ID_Audit       [核查(&A)]^C^C_audit
ID_Recover     [修复(&R)...]^C^C_recover
               [--]
ID_BupdateA    [更新块图标(&U)]^C^C_blockicon
               [--]
ID_Purge       [<-清理(&P)...]^C^C_purge
ID_SendMail  [发送(&D)...]
ID_Props     [图形特性(&I)...]^C^C_dwgprops
             [--]
ID_MRU       [绘图历史]
             [--]
ID_APP_EXIT  [退出(&X)\tCtrl+Q]^C^C_quit

***POP2
**EDIT
ID_MnEdit    [编辑(&E)]
ID_U         [放弃(&U)\tCtrl+Z]_u
ID_Redo      [重做(&R)\tCtrl+Y]^C^C_mredo 1
             [--]
ID_Cutclip   [剪切(&T)\tCtrl+X]^C^C_cutclip
ID_Copyclip  [复制(&C)\tCtrl+C]^C^C_copyclip
ID_Copybase  [带基点复制(&B)\tCtrl+Shift+C]^C^C_copybase
ID_Copylink  [复制链接(&L)]^C^C_copylink
ID_Pasteclip [粘贴(&P)\tCtrl+V]^C^C_pasteclip
ID_Pastebloc [粘贴为块(&K)\tCtrl+Shift+V]^C^C_pasteblock
ID_Pastehlnk [粘贴为超链接(&H)]^C^C_pasteashyperlink
ID_Pasteorig [粘贴到原坐标(&D)]^C^C_pasteorig
ID_Pastesp   [选择性粘贴(&S)...]^C^C_pastespec
             [--]
ID_Erase     [清除(&A)\tDel]^C^C_erase
ID_SelAll    [全部选择(&L)\tCtrl+A]^C^C_ai_selall
             [--]
ID_Links     [OLE 链接(&O)...]^C^C_olelinks
             [--]
ID_TextFind  [查找(&F)...]^C^C_find

***POP3
**VIEW
ID_MnView    [视图(&V)]
ID_Redrawall [重画(&R)]'_redrawall
ID_Regen     [重生成(&G)]^C^C_regen
ID_Regenall  [全部重生成(&A)]^C^C_regenall
             [--]
ID_MnZoom    [->缩放(&Z)]
ID_ZoomRealt   [实时(&R)]'_zoom ;
               [--]
ID_ZoomPrevi   [上一个(&P)]'_zoom _p
ID_ZoomWindo   [窗口(&W)]'_zoom _w
ID_ZoomDynam   [动态(&D)]'_zoom _d
ID_ZoomScale   [比例(&S)]'_zoom _s
ID_ZoomCente   [中心点(&C)]'_zoom _c
               [--]
ID_ZoomIn      [放大(&I)]'_zoom 2x
ID_ZoomOut     [缩小(&O)]'_zoom .5x
               [--]
ID_ZoomAll     [全部(&A)]'_zoom _all
ID_ZoomExten   [<-范围(&E)]'_zoom _e
ID_MnPan     [->平移(&P)]
ID_Pan         [实时(&T)]'_pan
ID_PanPick     [定点(&P)]'_-pan
               [--]
ID_PanLeft     [左(&L)]^P'_-pan (trans (list (* -0.2 (getvar "viewsize")) 0) 0 1) ;^P
ID_PanRight    [右(&R)]^P'_-pan (trans (list (* 0.2 (getvar "viewsize")) 0) 0 1) ;^P
ID_PanUp       [上(&U)]^P'_-pan (trans (list 0 (* 0.2 (getvar "viewsize"))) 0 1) ;^P
ID_PanDown     [<-下(&D)]^P'_-pan (trans (list 0 (* -0.2 (getvar "viewsize"))) 0 1) ;^P
ID_Dsviewer  [鸟瞰视图(&W)]'_dsviewer
             [--]
ID_CleanScreen [$(if,$(and,$(getvar,CleanScreenState),1),!.)清除屏幕(&C)\tCtrl+0]$M=$(if,$(and,$(getvar,CleanScreenState),1),^C^C_CleanScreenOFF,^C^C_CleanScreenON)
			 [--]
ID_MnTiledVi [->视口(&V)]
ID_Ai_tiledv   [命名视口(&N)...]^C^C_+vports 1
               [--]              
ID_VportsSav   [新建视口(&E)...]^C^C_+vports 0
ID_VportsSin   [一个视口(&1)]^C^C$M=$(if,$(eq,$(getvar,tilemode),1),^C^C_-vports _si,^C^C_-vports)
ID_Vports2     [两个视口(&2)]^C^C_-vports _2
ID_Vports3     [三个视口(&3)]^C^C_-vports _3
ID_Vports4     [四个视口(&4)]^C^C_-vports _4
ID_VportsRes   [$(if,$(eq,$(getvar,tilemode),1),~)多边形视口(&P)]^C^C_-vports _p
ID_VportsDel   [$(if,$(eq,$(getvar,tilemode),1),~)对象(&O)]^C^C_-vports _o
               [--] 
ID_VportsJoi   [<-$(if,$(eq,$(getvar,tilemode),0),~)合并(&J)]^C^C_-vports _j
ID_Ddview    [命名视图(&N)...]^C^C_view
ID_MnViewpoi [->$(if,$(and,$(eq,$(getvar,tilemode),0),$(eq,$(getvar,cvport),1)),~,)三维视图(&3)]
ID_Ddvpoint    [视点预置(&I)...]^C^C_ddvpoint
ID_VpointTri   [视点(&V)]^C^C_vpoint ;
ID_MnPlanView  [->平面视图(&P)]
ID_PlanCurre     [当前 UCS(&C)]^C^C_plan ;
ID_PlanWorld     [世界 UCS(&W)]^C^C_plan _w
ID_PlanUCS       [<-命名 UCS(&N)]^C^C_plan _u
               [--]
ID_VpointTop   [俯视(&T)]^C^C_-view _top
ID_VpointBot   [仰视(&B)]^C^C_-view _bottom
ID_VpointLef   [左视(&L)]^C^C_-view _left
ID_VpointRig   [右视(&R)]^C^C_-view _right
ID_VpointFro   [主视(&F)]^C^C_-view _front
ID_VpointBac   [后视(&K)]^C^C_-view _back
               [--]
ID_VpointSW    [西南等轴测(&S)]^C^C_-view _swiso
ID_VpointSE    [东南等轴测(&E)]^C^C_-view _seiso
ID_VpointNE    [东北等轴测(&N)]^C^C_-view _neiso
ID_VpointNW    [<-西北等轴测(&W)]^C^C_-view _nwiso
ID_3dorbit     [$(if,$(and,$(eq,$(getvar,tilemode),0),$(eq,$(getvar,cvport),1)),~,)三维动态观察器(&B)]'_3dorbit