acad.cui

用来计算建筑施工中的土方计算

          <SmallImage Name="RCDATA_16_OSNPER" />
          <LargeImage Name="RCDATA_16_OSNPER" />
        </Macro>
      </MenuMacro>
      <MenuMacro UID="ID_OsnapPara">
        <Macro type="Any">
          <Revision MajorVersion="16" MinorVersion="2" UserVersion="0" />
          <Name xlate="true" UID="ACAD_2187">Parallel</Name>
          <Command>_par </Command>
          <HelpString xlate="true" UID="ACAD_2222">Snaps parallel to a specified line:  PAR</HelpString>
          <SmallImage Name="RCDATA_16_OSNPAR" />
          <LargeImage Name="RCDATA_16_OSNPAR" />
        </Macro>
      </MenuMacro>
      <MenuMacro UID="ID_OsnapNode">
        <Macro type="Any">
          <Revision MajorVersion="16" MinorVersion="2" UserVersion="0" />
          <Name xlate="true" UID="ACAD_12">Node</Name>
          <Command>_nod </Command>
          <HelpString xlate="true" UID="ACAD_1569">Snaps to a point object:  NOD</HelpString>
          <SmallImage Name="RCDATA_16_OSNNOD" />
          <LargeImage Name="RCDATA_16_OSNNOD" />
        </Macro>
      </MenuMacro>
      <MenuMacro UID="ID_OsnapInse">
        <Macro type="Any">
          <Revision MajorVersion="16" MinorVersion="2" UserVersion="0" />
          <Name xlate="true" UID="ACAD_13">Insert</Name>
          <Command>_ins </Command>
          <HelpString xlate="true" UID="ACAD_1565">Snaps to the insertion point of objects such as text, blocks, or attributes:  INS</HelpString>
          <SmallImage Name="RCDATA_16_OSNINS" />
          <LargeImage Name="RCDATA_16_OSNINS" />
        </Macro>
      </MenuMacro>
      <MenuMacro UID="ID_OsnapNear">
        <Macro type="Any">
          <Revision MajorVersion="16" MinorVersion="2" UserVersion="0" />
          <Name xlate="true" UID="ACAD_1839">Nearest</Name>
          <Command>_nea </Command>
          <HelpString xlate="true" UID="ACAD_1568">Snaps to the nearest point on an object:  NEA</HelpString>
          <SmallImage Name="RCDATA_16_OSNNEA" />
          <LargeImage Name="RCDATA_16_OSNNEA" />
        </Macro>
      </MenuMacro>
      <MenuMacro UID="ID_OsnapNone">
        <Macro type="Any">
          <Revision MajorVersion="16" MinorVersion="2" UserVersion="0" />
          <Name xlate="true" UID="ACAD_14">None</Name>
          <Command>_non </Command>
          <HelpString xlate="true" UID="ACAD_1570">Suppresses running object snap for the current selection:  NON</HelpString>
          <SmallImage Name="RCDATA_16_OSNNON" />
          <LargeImage Name="RCDATA_16_OSNNON" />
        </Macro>
      </MenuMacro>
      <MenuMacro UID="ID_Osnap">
        <Macro type="Any">
          <Revision MajorVersion="16" MinorVersion="2" UserVersion="0" />
          <Name xlate="true" UID="ACAD_15">Osnap Settings...</Name>
          <Command>'_+dsettings 2 </Command>
          <HelpString xlate="true" UID="ACAD_1441">Sets running object snap modes:  OSNAP</HelpString>
          <SmallImage Name="RCDATA_16_OSNAP" />
          <LargeImage Name="RCDATA_16_OSNAP" />
        </Macro>
      </MenuMacro>
      <MenuMacro UID="ID_New">
        <Macro type="File">
          <Revision MajorVersion="16" MinorVersion="2" UserVersion="0" />
          <Name xlate="true" UID="ACAD_29">New...</Name>
          <Command>^C^C_new </Command>
          <HelpString xlate="true" UID="ACAD_1559">Creates a new drawing file:  NEW</HelpString>
          <SmallImage Name="RCDATA_16_NEW" />
          <LargeImage Name="RCDATA_16_NEW" />
        </Macro>
      </MenuMacro>
      <MenuMacro UID="ID_NewSheet">
        <Macro type="File">
          <Revision MajorVersion="16" MinorVersion="2" UserVersion="0" />
          <Name xlate="true" UID="ACAD_2549">New Sheet Set...</Name>
          <Command>^c^c_newsheetset </Command>
          <HelpString xlate="true" UID="ACAD_2560">Creates a new sheet set: NEWSHEETSET</HelpString>
        </Macro>
      </MenuMacro>
      <MenuMacro UID="ID_Open">
        <Macro type="File">
          <Revision MajorVersion="16" MinorVersion="2" UserVersion="0" />
          <Name xlate="true" UID="ACAD_30">Open...</Name>
          <Command>^C^C_open </Command>
          <HelpString xlate="true" UID="ACAD_1561">Opens an existing drawing file:  OPEN</HelpString>
          <SmallImage Name="RCDATA_16_OPEN" />
          <LargeImage Name="RCDATA_16_OPEN" />
        </Macro>
      </MenuMacro>
      <MenuMacro UID="ID_OpenSheet">
        <Macro type="File">
          <Revision MajorVersion="16" MinorVersion="2" UserVersion="0" />
          <Name xlate="true" UID="ACAD_2550">Open Sheet Set...</Name>
          <Command>^c^c_opensheetset </Command>
          <HelpString xlate="true" UID="ACAD_2561">Opens a specified sheet set: OPENSHEETSET</HelpString>
        </Macro>
      </MenuMacro>
      <MenuMacro UID="ID_OpenMarkupDWF">
        <Macro type="File">
          <Revision MajorVersion="16" MinorVersion="2" UserVersion="0" />
          <Name xlate="true" UID="ACAD_2573">Load Markup Set...</Name>
          <Command>^c^c_opendwfmarkup </Command>
          <HelpString xlate="true" UID="ACAD_2575">Loads a DWF file that contains markups: OPENDWFMARKUP</HelpString>
          <SmallImage Name="RCDATA_16_Markup" />
          <LargeImage Name="RCDATA_16_Markup" />
        </Macro>
      </MenuMacro>
      <MenuMacro UID="ID_DWG_CLOSE">
        <Macro type="File">
          <Revision MajorVersion="16" MinorVersion="2" UserVersion="0" />
          <Name xlate="true" UID="ACAD_1932">Close</Name>
          <Command>^C^C_close </Command>
          <HelpString xlate="true" UID="ACAD_1933">Closes the current drawing:  CLOSE</HelpString>
        </Macro>
      </MenuMacro>
      <MenuMacro UID="ID_PartialOp">
        <Macro type="File">
          <Revision MajorVersion="16" MinorVersion="2" UserVersion="0" />
          <Name xlate="true" UID="ACAD_2100">Partial Load</Name>
          <Command>^C^C_partiaload </Command>
          <HelpString xlate="true" UID="ACAD_2101">Loads additional geometry into a partially opened drawing:  PARTIALOAD</HelpString>
        </Macro>
      </MenuMacro>
      <MenuMacro UID="ID_Save">
        <Macro type="File">
          <Revision MajorVersion="16" MinorVersion="2" UserVersion="0" />
          <Name xlate="true" UID="ACAD_31">Save</Name>
          <Command>^C^C_qsave </Command>
          <HelpString xlate="true" UID="ACAD_1604">Saves the current drawing:  QSAVE</HelpString>
          <SmallImage Name="RCDATA_16_SAVE" />
          <LargeImage Name="RCDATA_16_SAVE" />
        </Macro>
      </MenuMacro>
      <MenuMacro UID="ID_Saveas">
        <Macro type="File">
          <Revision MajorVersion="16" MinorVersion="2" UserVersion="0" />
          <Name xlate="true" UID="ACAD_32">Save As...</Name>
          <Command>^C^C_saveas </Command>
          <HelpString xlate="true" UID="ACAD_1624">Saves a copy of the current drawing under a new file name:  SAVEAS</HelpString>
        </Macro>
      </MenuMacro>
      <MenuMacro UID="ID_ETransmit">
        <Macro type="File">
          <Revision MajorVersion="16" MinorVersion="2" UserVersion="0" />
          <Name xlate="true" UID="ACAD_2351">eTransmit...</Name>
          <Command>^C^C_etransmit </Command>
          <HelpString xlate="true" UID="ACAD_2351">Creates a transmittal set of a drawing and related files:  ETRANSMIT</HelpString>
          <SmallImage Name="RCDATA_16_ETRANSMIT" />
          <LargeImage Name="RCDATA_16_ETRANSMIT" />
        </Macro>
      </MenuMacro>
      <MenuMacro UID="ID_Publish">
        <Macro type="File">
          <Revision MajorVersion="16" MinorVersion="2" UserVersion="0" />
          <Name xlate="true" UID="ACAD_2357">Publish to Web...</Name>
          <Command>^C^C_publishtoweb </Command>
          <HelpString xlate="true" UID="ACAD_2377">Creates HTML pages that include images of selected drawings:  PUBLISHTOWEB</HelpString>
          <SmallImage Name="RCDATA_16_PUBWEB" />
          <LargeImage Name="RCDATA_16_PUBWEB" />
        </Macro>
      </MenuMacro>
      <MenuMacro UID="ID_Export">
        <Macro type="File">
          <Revision MajorVersion="16" MinorVersion="2" UserVersion="0" />
          <Name xlate="true" UID="ACAD_33">Export...</Name>
          <Command>^C^C_export </Command>
          <HelpString xlate="true" UID="ACAD_1490">Saves objects to other file formats:  EXPORT</HelpString>
        </Macro>
      </MenuMacro>
      <MenuMacro UID="ID_PlotSetup">
        <Macro type="File">
          <Revision MajorVersion="16" MinorVersion="2" UserVersion="0" />
          <Name xlate="true" UID="ACAD_2013">Page Setup Manager...</Name>
          <Command>^C^C_pagesetup </Command>
          <HelpString xlate="true" UID="ACAD_2014">Specifies the layout page, plotting device, paper size, and settings for each new layout:  PAGESETUP</HelpString>
          <SmallImage Name="RCDATA_16_PLTSET" />
          <LargeImage Name="RCDATA_16_PLTSET" />
        </Macro>
      </MenuMacro>
      <MenuMacro UID="ID_PlotMgr">
        <Macro type="File">
          <Revision MajorVersion="16" MinorVersion="2" UserVersion="0" />
          <Name xlate="true" UID="ACAD_2212">Plotter Manager...</Name>
          <Command>^C^C_plottermanager </Command>
          <HelpString xlate="true" UID="ACAD_2320">Displays the Plotter Manager, where you can launch the Add-a-Plotter wizard and the Plotter Configuration Editor:  PLOTTERMANAGER</HelpString>
        </Macro>
      </MenuMacro>
      <MenuMacro UID="ID_PlotStyMgr">
        <Macro type="File">
          <Revision MajorVersion="16" MinorVersion="2" UserVersion="0" />
          <Name xlate="true" UID="ACAD_2191">Plot Style Manager...</Name>
          <Command>^C^C_stylesmanager </Command>
          <HelpString xlate="true" UID="ACAD_2321">Provides access to the Add Plot Style Table wizard and the Plot Style Table Editor:  STYLESMANAGER</HelpString>
        </Macro>
      </MenuMacro>
      <MenuMacro UID="ID_Preview">
        <Macro type="File">
          <Revision MajorVersion="16" MinorVersion="2" UserVersion="0" />
          <Name xlate="true" UID="ACAD_35">Plot Preview</Name>
          <Command>^C^C_preview </Command>
          <HelpString xlate="true" UID="ACAD_1594">Shows how the drawing will look when it is printed or plotted:  PREVIEW</HelpString>
          <SmallImage Name="RCDATA_16_PREVIEW" />
          <LargeImage Name="RCDATA_16_PREVIEW" />
        </Macro>
      </MenuMacro>
      <MenuMacro UID="ID_Print">
        <Macro type="File">
          <Revision MajorVersion="16" MinorVersion="2" UserVersion="0" />
          <Name xlate="true" UID="ACAD_36">Plot...</Name>
          <Command>^C^C_plot </Command>
          <HelpString xlate="true" UID="ACAD_1588">Prints a drawing to a plotter, printer, or file:  PLOT</HelpString>
          <SmallImage Name="RCDATA_16_PRINT" />
          <LargeImage Name="RCDATA_16_PRINT" />
        </Macro>
      </MenuMacro>
      <MenuMacro UID="ID_Pub">
        <Macro type="File">
          <Revision MajorVersion="16" MinorVersion="2" UserVersion="0" />
          <Name xlate="true" UID="ACAD_2523">Publish...</Name>
          <Command>^C^C_publish </Command>
          <HelpString xlate="true" UID="ACAD_2524">Publishes drawings to DWF files or plotters:  PUBLISH</HelpString>
          <SmallImage Name="RCDATA_16_PUBL" />
          <LargeImage Name="RCDATA_16_PUBL" />
        </Macro>
      </MenuMacro>
      <MenuMacro UID="ID_PubDetails">