acad.cui

用来计算建筑施工中的土方计算

        <Macro type="Any">
          <Revision MajorVersion="16" MinorVersion="2" UserVersion="0" />
          <Name xlate="true" UID="XLS_0005">Cancel</Name>
          <Command>^C^C </Command>
          <HelpString xlate="true" UID="XLS_0006" />
        </Macro>
      </MenuMacro>
      <MenuMacro UID="MM_0004">
        <Macro type="Any">
          <Revision MajorVersion="16" MinorVersion="2" UserVersion="0" />
          <Name xlate="true" UID="XLS_0007">Toggle Snap</Name>
          <Command>^B </Command>
          <HelpString xlate="true" UID="XLS_0008" />
        </Macro>
      </MenuMacro>
      <MenuMacro UID="MM_0005">
        <Macro type="Any">
          <Revision MajorVersion="16" MinorVersion="2" UserVersion="0" />
          <Name xlate="true" UID="XLS_0009">Toggle Ortho</Name>
          <Command>^O </Command>
          <HelpString xlate="true" UID="XLS_0010" />
        </Macro>
      </MenuMacro>
      <MenuMacro UID="MM_0006">
        <Macro type="Any">
          <Revision MajorVersion="16" MinorVersion="2" UserVersion="0" />
          <Name xlate="true" UID="XLS_0011">Toggle Grid</Name>
          <Command>^G </Command>
          <HelpString xlate="true" UID="XLS_0012" />
        </Macro>
      </MenuMacro>
      <MenuMacro UID="MM_0007">
        <Macro type="Any">
          <Revision MajorVersion="16" MinorVersion="2" UserVersion="0" />
          <Name xlate="true" UID="XLS_0013">Toggle Coords</Name>
          <Command>^D </Command>
          <HelpString xlate="true" UID="XLS_0014" />
        </Macro>
      </MenuMacro>
      <MenuMacro UID="MM_0008">
        <Macro type="Any">
          <Revision MajorVersion="16" MinorVersion="2" UserVersion="0" />
          <Name xlate="true" UID="XLS_0015">Toggle Isoplane</Name>
          <Command>^E </Command>
          <HelpString xlate="true" UID="XLS_0016" />
        </Macro>
      </MenuMacro>
      <MenuMacro UID="MM_0009">
        <Macro type="Any">
          <Revision MajorVersion="16" MinorVersion="2" UserVersion="0" />
          <Name xlate="true" UID="XLS_0017">Toggle Tablet</Name>
          <Command>^T </Command>
          <HelpString xlate="true" UID="XLS_0018" />
        </Macro>
      </MenuMacro>
      <MenuMacro UID="ID_Tracking">
        <Macro type="Any">
          <Revision MajorVersion="16" MinorVersion="2" UserVersion="0" />
          <Name xlate="true" UID="ACAD_2">Temporary track point</Name>
          <Command>_tt </Command>
          <HelpString xlate="true" UID="ACAD_1677">Creates a temporary point used by Osnaps:  TT</HelpString>
          <SmallImage Name="RCDATA_16_OSNTMP" />
          <LargeImage Name="RCDATA_16_OSNTMP" />
        </Macro>
      </MenuMacro>
      <MenuMacro UID="ID_From">
        <Macro type="Any">
          <Revision MajorVersion="16" MinorVersion="2" UserVersion="0" />
          <Name xlate="true" UID="ACAD_3">From</Name>
          <Command>_from </Command>
          <HelpString xlate="true" UID="ACAD_1494">Locates a point offset from a reference point within a command:  FROM</HelpString>
          <SmallImage Name="RCDATA_16_OSNFRO" />
          <LargeImage Name="RCDATA_16_OSNFRO" />
        </Macro>
      </MenuMacro>
      <MenuMacro UID="ID_MidTwoPts">
        <Macro type="Any">
          <Revision MajorVersion="16" MinorVersion="2" UserVersion="0" />
          <Name xlate="true" UID="ACAD_2600">Mid Between 2 Points</Name>
          <Command>_m2p </Command>
          <HelpString xlate="true" UID="ACAD_2601">Finds the mid between two points:  m2p</HelpString>
        </Macro>
      </MenuMacro>
      <MenuMacro UID="ID_PointFilx">
        <Macro type="Any">
          <Revision MajorVersion="16" MinorVersion="2" UserVersion="0" />
          <Name xlate="true" UID="ACAD_1864">.X</Name>
          <Command>.X </Command>
          <HelpString xlate="true" UID="ACAD_1874">Specifies a .X point filter:  .X</HelpString>
          <SmallImage Name="RCDATA_16_PTFX" />
          <LargeImage Name="RCDATA_16_PTFX" />
        </Macro>
      </MenuMacro>
      <MenuMacro UID="ID_PointFily">
        <Macro type="Any">
          <Revision MajorVersion="16" MinorVersion="2" UserVersion="0" />
          <Name xlate="true" UID="ACAD_1865">.Y</Name>
          <Command>.Y </Command>
          <HelpString xlate="true" UID="ACAD_1875">Specifies a .Y point filter:  .Y</HelpString>
          <SmallImage Name="RCDATA_16_PTFY" />
          <LargeImage Name="RCDATA_16_PTFY" />
        </Macro>
      </MenuMacro>
      <MenuMacro UID="ID_PointFilz">
        <Macro type="Any">
          <Revision MajorVersion="16" MinorVersion="2" UserVersion="0" />
          <Name xlate="true" UID="ACAD_1866">.Z</Name>
          <Command>.Z </Command>
          <HelpString xlate="true" UID="ACAD_1876">Specifies a .Z point filter:  .Z</HelpString>
          <SmallImage Name="RCDATA_16_PTFZ" />
          <LargeImage Name="RCDATA_16_PTFZ" />
        </Macro>
      </MenuMacro>
      <MenuMacro UID="ID_PointFixy">
        <Macro type="Any">
          <Revision MajorVersion="16" MinorVersion="2" UserVersion="0" />
          <Name xlate="true" UID="ACAD_1867">.XY</Name>
          <Command>.XY </Command>
          <HelpString xlate="true" UID="ACAD_1877">Specifies a .XY point filter:  .XY</HelpString>
          <SmallImage Name="RCDATA_16_PTFXY" />
          <LargeImage Name="RCDATA_16_PTFXY" />
        </Macro>
      </MenuMacro>
      <MenuMacro UID="ID_PointFixz">
        <Macro type="Any">
          <Revision MajorVersion="16" MinorVersion="2" UserVersion="0" />
          <Name xlate="true" UID="ACAD_1868">.XZ</Name>
          <Command>.XZ </Command>
          <HelpString xlate="true" UID="ACAD_1878">Specifies a .XZ point filter:  .XZ</HelpString>
          <SmallImage Name="RCDATA_16_PTFXZ" />
          <LargeImage Name="RCDATA_16_PTFXZ" />
        </Macro>
      </MenuMacro>
      <MenuMacro UID="ID_PointFiyz">
        <Macro type="Any">
          <Revision MajorVersion="16" MinorVersion="2" UserVersion="0" />
          <Name xlate="true" UID="ACAD_1869">.YZ</Name>
          <Command>.YZ </Command>
          <HelpString xlate="true" UID="ACAD_1879">Specifies a .YZ point filter:  .YZ</HelpString>
          <SmallImage Name="RCDATA_16_PTFYZ" />
          <LargeImage Name="RCDATA_16_PTFYZ" />
        </Macro>
      </MenuMacro>
      <MenuMacro UID="ID_OsnapEndp">
        <Macro type="Any">
          <Revision MajorVersion="16" MinorVersion="2" UserVersion="0" />
          <Name xlate="true" UID="ACAD_4">Endpoint</Name>
          <Command>_endp </Command>
          <HelpString xlate="true" UID="ACAD_1564">Snaps to the closest endpoint of an object:  ENDP</HelpString>
          <SmallImage Name="RCDATA_16_OSNEND" />
          <LargeImage Name="RCDATA_16_OSNEND" />
        </Macro>
      </MenuMacro>
      <MenuMacro UID="ID_OsnapMidp">
        <Macro type="Any">
          <Revision MajorVersion="16" MinorVersion="2" UserVersion="0" />
          <Name xlate="true" UID="ACAD_5">Midpoint</Name>
          <Command>_mid </Command>
          <HelpString xlate="true" UID="ACAD_1567">Snaps to the midpoint of an object:  MID</HelpString>
          <SmallImage Name="RCDATA_16_OSNMID" />
          <LargeImage Name="RCDATA_16_OSNMID" />
        </Macro>
      </MenuMacro>
      <MenuMacro UID="ID_OsnapInte">
        <Macro type="Any">
          <Revision MajorVersion="16" MinorVersion="2" UserVersion="0" />
          <Name xlate="true" UID="ACAD_6">Intersection</Name>
          <Command>_int </Command>
          <HelpString xlate="true" UID="ACAD_1566">Snaps to the intersection of two objects:  INT</HelpString>
          <SmallImage Name="RCDATA_16_OSNINT" />
          <LargeImage Name="RCDATA_16_OSNINT" />
        </Macro>
      </MenuMacro>
      <MenuMacro UID="ID_OsnapAppa">
        <Macro type="Any">
          <Revision MajorVersion="16" MinorVersion="2" UserVersion="0" />
          <Name xlate="true" UID="ACAD_7">Apparent Intersect</Name>
          <Command>_appint </Command>
          <HelpString xlate="true" UID="ACAD_1562">Snaps to the apparent intersection of two objects:  APPINT</HelpString>
          <SmallImage Name="RCDATA_16_OSNAPP" />
          <LargeImage Name="RCDATA_16_OSNAPP" />
        </Macro>
      </MenuMacro>
      <MenuMacro UID="ID_OsnapExte">
        <Macro type="Any">
          <Revision MajorVersion="16" MinorVersion="2" UserVersion="0" />
          <Name xlate="true" UID="ACAD_2188">Extension</Name>
          <Command>_ext </Command>
          <HelpString xlate="true" UID="ACAD_2221">Snaps to the phantom extension of an arc or line:  EXT</HelpString>
          <SmallImage Name="RCDATA_16_OSNEXT" />
          <LargeImage Name="RCDATA_16_OSNEXT" />
        </Macro>
      </MenuMacro>
      <MenuMacro UID="ID_OsnapCent">
        <Macro type="Any">
          <Revision MajorVersion="16" MinorVersion="2" UserVersion="0" />
          <Name xlate="true" UID="ACAD_8">Center</Name>
          <Command>_cen </Command>
          <HelpString xlate="true" UID="ACAD_1563">Snaps to the center of an arc, circle, ellipse, or elliptical arc:  CEN</HelpString>
          <SmallImage Name="RCDATA_16_OSNCEN" />
          <LargeImage Name="RCDATA_16_OSNCEN" />
        </Macro>
      </MenuMacro>
      <MenuMacro UID="ID_OsnapQuad">
        <Macro type="Any">
          <Revision MajorVersion="16" MinorVersion="2" UserVersion="0" />
          <Name xlate="true" UID="ACAD_9">Quadrant</Name>
          <Command>_qua </Command>
          <HelpString xlate="true" UID="ACAD_1572">Snaps to a quadrant point of an arc, circle, ellipse, or elliptical arc:  QUA</HelpString>
          <SmallImage Name="RCDATA_16_OSNQUA" />
          <LargeImage Name="RCDATA_16_OSNQUA" />
        </Macro>
      </MenuMacro>
      <MenuMacro UID="ID_OsnapTang">
        <Macro type="Any">
          <Revision MajorVersion="16" MinorVersion="2" UserVersion="0" />
          <Name xlate="true" UID="ACAD_10">Tangent</Name>
          <Command>_tan </Command>
          <HelpString xlate="true" UID="ACAD_1574">Snaps to the tangent of an arc, circle, ellipse, elliptical arc, or spline:  TAN</HelpString>
          <SmallImage Name="RCDATA_16_OSNTAN" />
          <LargeImage Name="RCDATA_16_OSNTAN" />
        </Macro>
      </MenuMacro>
      <MenuMacro UID="ID_OsnapPerp">
        <Macro type="Any">
          <Revision MajorVersion="16" MinorVersion="2" UserVersion="0" />
          <Name xlate="true" UID="ACAD_11">Perpendicular</Name>
          <Command>_per </Command>
          <HelpString xlate="true" UID="ACAD_1571">Snaps to a point perpendicular to an object:  PER</HelpString>