ether.c

SMDK6400_WinCE_CS8900A 源代碼

//
// Copyright (c) Microsoft Corporation.  All rights reserved.
//
//
// Use of this source code is subject to the terms of the Microsoft end-user
// license agreement (EULA) under which you licensed this SOFTWARE PRODUCT.
// If you did not accept the terms of the EULA, you are not authorized to use
// this source code. For a copy of the EULA, please see the LICENSE.RTF on your
// install media.
//

#include <windows.h>
#include <halether.h>
#define __OAL_ETHDRV_H	// Temporary: clean up build warning until EDBG prototypes are moved.
#include <bsp.h>
#include "loader.h"

#define FROM_BCD(n)    ((((n) >> 4) * 10) + ((n) & 0xf))
#define TO_BCD(n)      ((((n) / 10) << 4) | ((n) % 10))

// 6400
#define CS8900_Tacs	(0x0)	// 0clk
#define CS8900_Tcos	(0x4)	// 4clk
#define CS8900_Tacc	(0xd)	// 14clk
#define CS8900_Tcoh	(0x1)	// 1clk
#define CS8900_Tah	(0x4)	// 4clk
#define CS8900_Tacp	(0x6)	// 6clk
#define CS8900_PMC	(0x0)	// normal(1data)

// Function pointers to the support library functions of the currently installed debug ethernet controller.
//
PFN_EDBG_INIT             pfnEDbgInit;
PFN_EDBG_ENABLE_INTS      pfnEDbgEnableInts;
PFN_EDBG_DISABLE_INTS     pfnEDbgDisableInts;
PFN_EDBG_GET_PENDING_INTS pfnEDbgGetPendingInts;
PFN_EDBG_GET_FRAME        pfnEDbgGetFrame;
PFN_EDBG_SEND_FRAME       pfnEDbgSendFrame;
PFN_EDBG_READ_EEPROM      pfnEDbgReadEEPROM;
PFN_EDBG_WRITE_EEPROM     pfnEDbgWriteEEPROM;
PFN_EDBG_SET_OPTIONS      pfnEDbgSetOptions;

// Function prototypes.
//
BOOL    CS8900DBG_Init(PBYTE iobase, DWORD membase, USHORT MacAddr[3]);
UINT16  CS8900DBG_GetFrame(PBYTE pbData, UINT16 *pwLength);
UINT16  CS8900DBG_SendFrame(PBYTE pbData, DWORD dwLength);

static void InitSROMC_CS8900(void)
{
	volatile S3C6400_SROMCON_REG *s6400SROM = (S3C6400_SROMCON_REG *)OALPAtoVA(S3C6400_BASE_REG_PA_SROMCON, FALSE);

	s6400SROM->SROM_BW = (s6400SROM->SROM_BW & ~(0xF<<4)) |
							(1<<7)| // nWBE/nBE(for UB/LB) control for Memory Bank1(0=Not using UB/LB, 1=Using UB/LB)
							(1<<6)| // Wait enable control for Memory Bank1 (0=WAIT disable, 1=WAIT enable)
							(1<<4); // Data bus width control for Memory Bank1 (0=8-bit, 1=16-bit)

	s6400SROM->SROM_BC1 = ((CS8900_Tacs<<28)+(CS8900_Tcos<<24)+(CS8900_Tacc<<16)+(CS8900_Tcoh<<12)\
							+(CS8900_Tah<<8)+(CS8900_Tacp<<4)+(CS8900_PMC));
}


/*
    @func   BOOL | InitEthDevice | Initializes the Ethernet device to be used for download.
    @rdesc  TRUE = Success, FALSE = Failure.
    @comm
    @xref
*/
BOOL InitEthDevice(PBOOT_CFG pBootCfg)
{
	PBYTE  pBaseIOAddress = NULL;
	UINT32 MemoryBase = 0;
	BOOL bResult = FALSE;

	OALMSG(OAL_FUNC, (TEXT("+InitEthDevice.\r\n")));

	InitSROMC_CS8900();

	// Use the MAC address programmed into flash by the user.
	//
	memcpy(pBSPArgs->kitl.mac, pBootCfg->EdbgAddr.wMAC, 6);

	// Use the CS8900A Ethernet controller for download.
	//
	pfnEDbgInit      = CS8900DBG_Init;
	pfnEDbgGetFrame  = CS8900DBG_GetFrame;
	pfnEDbgSendFrame = CS8900DBG_SendFrame;

	pBaseIOAddress   = (PBYTE)OALPAtoVA(pBSPArgs->kitl.devLoc.LogicalLoc, FALSE);

	MemoryBase       = (UINT32)OALPAtoVA(BSP_BASE_REG_PA_CS8900A_MEMBASE, FALSE);

	//RETAILMSG(1,(TEXT("0x%X 0x%X\n"),pBaseIOAddress,MemoryBase));
	// Initialize the Ethernet controller.
	//
	if (!pfnEDbgInit((PBYTE)pBaseIOAddress, MemoryBase, pBSPArgs->kitl.mac))
	{
		OALMSG(OAL_ERROR, (TEXT("ERROR: InitEthDevice: Failed to initialize Ethernet controller.\r\n")));
		goto CleanUp;
	}

	// Make sure MAC address has been programmed.
	//
	if (!pBSPArgs->kitl.mac[0] && !pBSPArgs->kitl.mac[1] && !pBSPArgs->kitl.mac[2])
	{
		OALMSG(OAL_ERROR, (TEXT("ERROR: InitEthDevice: Invalid MAC address.\r\n")));
		goto CleanUp;
	}

	bResult = TRUE;

CleanUp:

	OALMSG(OAL_FUNC, (TEXT("-InitEthDevice.\r\n")));

	return(bResult);
}


/*
    @func   BOOL | OEMGetRealTime | Returns the current wall-clock time from the RTC.
    @rdesc  TRUE = Success, FALSE = Failure.
    @comm
    @xref
*/
static BOOL OEMGetRealTime(LPSYSTEMTIME lpst)
{
	volatile S3C6400_RTC_REG *s6400RTC = (S3C6400_RTC_REG *)OALPAtoVA(S3C6400_BASE_REG_PA_RTC, FALSE);

	do
	{
		lpst->wYear         = FROM_BCD(s6400RTC->BCDYEAR) + 2000 ;
		lpst->wMonth        = FROM_BCD(s6400RTC->BCDMON   & 0x1f);
		lpst->wDay          = FROM_BCD(s6400RTC->BCDDATE  & 0x3f);

		lpst->wDayOfWeek    = (s6400RTC->BCDDAY - 1);

		lpst->wHour         = FROM_BCD(s6400RTC->BCDHOUR  & 0x3f);
		lpst->wMinute       = FROM_BCD(s6400RTC->BCDMIN   & 0x7f);
		lpst->wSecond       = FROM_BCD(s6400RTC->BCDSEC   & 0x7f);
		lpst->wMilliseconds = 0;
	}
	while (!(lpst->wSecond));

	return(TRUE);
}


/*
    @func   DWORD | OEMEthGetSecs | Returns a free-running seconds count.
    @rdesc  Number of elapsed seconds since last roll-over.
    @comm
    @xref
*/
DWORD OEMEthGetSecs(void)
{
	SYSTEMTIME sTime;

	OEMGetRealTime(&sTime);
	return((60UL * (60UL * (24UL * (31UL * sTime.wMonth + sTime.wDay) + sTime.wHour) + sTime.wMinute)) + sTime.wSecond);
}


/*
    @func   BOOL | OEMEthGetFrame | Reads data from the Ethernet device.
    @rdesc  TRUE = Success, FALSE = Failure.
    @comm
    @xref
*/
BOOL OEMEthGetFrame(PUCHAR pData, PUSHORT pwLength)
{
	return(pfnEDbgGetFrame(pData, pwLength));
}


/*
    @func   BOOL | OEMEthSendFrame | Writes data to an Ethernet device.
    @rdesc  TRUE = Success, FALSE = Failure.
    @comm
    @xref
*/
BOOL OEMEthSendFrame(PUCHAR pData, DWORD dwLength)
{
	BYTE Retries = 0;

	while (Retries++ < 4)
	{
		if (!pfnEDbgSendFrame(pData, dwLength))
			return(TRUE);

		EdbgOutputDebugString("INFO: OEMEthSendFrame: retrying send (%u)\r\n", Retries);
	}

	return(FALSE);
}